Professional Documents
Culture Documents
Line Ball Valves Testing: Nominal Dia Dim A' (MM) Torque (NM) Working Pressure (Bar) DIM B' (MM)
Line Ball Valves Testing: Nominal Dia Dim A' (MM) Torque (NM) Working Pressure (Bar) DIM B' (MM)
Materials CE Marking
Medical gas line ball valve assemblies shall be constructed in a The standard range of BeaconMedæs line ball valves are ‘CE’ marked
two-piece full-bore design with brass body, Teflon® ball seals, stem under the Medical Devices Directive 93/42/EEC with approval from
packing seal, stem ‘O’ ring seal and a hard-chrome plated brass notified body no. 0088 (Lloyd’s Register Quality Assurance). Under
ball. Vales shall be designed to have a tight shut-off and blow out this directive, the specified products are classified as Class IIa Medical
proof stem for protection against pressure surges. Copper stub pipes Devices.
shall be manufactured from medical grade copper pipe to BS EN
13348:2001. Copper stub pipes shall be of sufficient length to enable
brazing directly into the distribution system without the need for Teflon® is a registered trademark of DuPont Dow Elastomers
disassembly on site. Viton® is a registered trademark of DuPont Dow Elastomers
BeaconMedæs
Telford Crescent,
Staveley, Derbyshire
S43 3PF, England
Tel: +44 (0) 1246 474 242
Fax: +44 (0) 1246 472 982 0088
Company Reg No. 2957933 (English) ● Company VAT Reg No. 598612590 ● www.beaconmedaes.com ● gbn.info@beaconmedaes.com
Constructionline Reg No. 75463 ● CHAS accredited contractor ● SAFEcontractor Reg No. N00184450