Professional Documents
Culture Documents
DLT Catalog
DLT Catalog
NEW HAMPSHIRE
sales@driller. com
NOTE: D & L THOMAS EQUIPMENT CORP. has no control over the use of its products, or over
the environment in which they are used. We assume no responsibility for any inconvenience caused
or for any loss, injury, or damage arising from the use or possession of the products.
At
D & L THOMAS EQUIPMENT
YOU'RE IMPORTANT TO US!
We are a major distributor of drilling, blasting, air compressor, and
waterwell equipment and supplies in the United States and worldwide.
This means we can give you the best product at the best price with imme-
diate delivery. Our knowledgeable and experienced staff are dedicated to
customer service and quality workmanship.
Our goal is customer satisfaction and the development of lasting re-
lationships with our valued customers. We want to be your first choice for
equipment, rentals, supplies, parts and service and we want to do it right
the first time.
Our large inventory of equipment, parts, and supplies—including hard
to find items—allows us to make same day shipments. We back every
product we sell. Warranty claims are handled promptly.
Your needs are our business, we will assist you any way we can—let
us save you money on the bottom line!
David Thomas
President
Part
Description Size Number
Leadwire reel. Light- 13" X 18" X 10" ILWR
weight and strong—will
hold up to 500'of 14-2
wire. Wire not included.
Metal reel on stand.
HOLE SIZE
Drill hole plugs. Light, du- 3/4" - 1-3/4" TDHP1
rable and will never freeze up. 2" - 2-1/4" TDHP1A
Lugs hold plug in place, inden- 3-4"" . 3" TDHP2A
tation for blasting cord. Fol- 4" -5-1/2" TDHP6
lowing sizes cover all holes of 6" - 8-1/2" TDHP9
1/2" to 13" circumference 9". 10" TDHP10
withstands extreme abuse. 10 1/2" - 12-1/2" TDHP13
PMP075
PMP100
PMP125
Dewatering Pump
The BDS Pump is a simple dewatering device, designed for
one man operation.
It requires low pressure, low volume, compressed air for op-
eration. The assembly consists of a stainless steel pump body,
expandable (and replaceable) rubber sleeves, upper and lower
discharge hoses, air supply hose, pressure regulator assem-
bly, operating valve, and fittings.
The lightweight tube and sleeve assembly is lowered into the
blasthole to be dewatered, the air valve opened, inflating and
consequently expanding the sleeve. Once the sleeve seals
against the wall of the hole, air pressure is automatically di-
verted through the lower end of the sleeve. This pressurizes
the hole below the sleeve, forcing water up the discharge tube
to the surface.
35O
MODEL 350 LIGHTNING DETECTOR
The Model 350 is a low cost Atmospheric RF sensing instrument
that detects electrical storm discharge and indicates the
storm's proximity in approximate distance in miles.
This unit allows the operator to preset an alarm distance,
and the Model 350 will then constantly monitor an approach-
ing storm cell and when the threshold has been exceeded,
the red warning lights will flash and a pulse tone will be emit-
ted from the Model 350. The flashing lights and the pulsed tone
will continue until the "reset" button has been pressed which
returns the 350 to the monitoring mode.
The external warning, strobe light and siren unit may be re-
moved from the 350 and mounted externally to allow person-
nel to observe the 350 from a greater distance or in a noisy
setting and respond to approaching danger.
Galvanometers
WARRANTY
Thomas Instruments is committed to providing the
best and most reliable equipment available. As
such, all Thomas Instruments products are
backed by a 1-year warranty. Please contact
Thomas Instruments, or your nearest distributor for
full details.
••I
MODEL 104 .
The rugged waterproof Model 104 is the perfect
replacement for your old analog meter. The digi-
tal display allows accuracy far beyond these old Meters MSHA Battery Current
meters in a similar size, while MSHA approved and Model Weight Size Seal Approved Ranges Type Options Output
absolutely safe in blasting circuit measurements,
MODEL 105 1 (1-2KQ) 9V NEDA Leather
The lightweight 105 is the perfect galvanometer 104 12 oz 3x3x15 Waterproof Yes Galvanometer 1604/1604A Case <2mA
for today's explosive experts. The bright yellow
105 is MSHA approved and is small enough to fit
in a shirt pocket while remaining rugged enough
for demanding usage everyday. 105 5oz 4.6x2,4x1.1 Dust & Damp Yes HlQ-2Kfl) 9V NEDA Leather <2mA
MODEL 109SC Proof Galvanometer 1604 / 1604A Case
The 109SC allows checking for stray current with-
out the fumbling with leads. The 109SC is a safety 8 Range
MUST while using electric blasting caps. Remem- 109SC 20 oz 3.9x7.2x2 Waterproof No Multimeter/ 9V NEDA Vinyl
ber, stray current must be tested for prior to any Stray Current 1604 / 1604A Case <4mA
electric blasting operation, OSHA 29CFR 1926
906B and MSHA 30CFR 77.1304.TT.
Size: 9x7x7.5_______________________
Weight: 9 Ibs.________________________
Battery: 12V Rechargeable_______________
Sound Level: 110 db at 10 feet
Charger: DC Vehicle; Optional: 120V AC________
DRILL MONITOR
DM-100 INCREASE YOUR PRODUCTIVITY BY
REDUCING SETUP TIME
ALSO USEFUL FOR EVALUATING SYSTEM'S PERFORMANCE
Displays Information such as
^ Angle of Boom, Front to Back
and Side to Side IN DEGREES OR SLOPE!!
- Hole Depth and Bit Depth
are displayed at the same time
>* Total Footage Drilled viewable at
any time, even while drilling.
^ Drill Rate indication programmable for
Feet/Min or Feet/Hour Drill Rate,
Screen updating is also programmable
in one second intervals,
Highlights
SYSTEM
DRILL MONITOR displays important intormation such as HOLE DEPTH, BIT DEPTH, and DRILLING RATE on a LARGE and
easy to read LCD display. Also displayed is the BOOM ANGLE, front to back and side to side. Make setup a breeze
when drilling pre-split holes or whenever the angle really counts. No more guessing! Simply read the LCD screen to
determine your boom angle when setting up each hole.
Displayed on the LCD are the angle of the boom shown in one of two selectable methods.
LCD
Large easy to read LCD is also Backlit making it easy to read even in the worst of conditions,
Power
Power is drawn from the rig's battery, The Drill Monitor draws no power when it's power switch is turned
off, eliminating any chance of draining the batter/, Yet even with no power supplied, the Drill Monitor
retains all pertinent information such as total hole footage drilled,
Drilling Rate
Also included on the same screen is the drill rate. Know how many feet/minute or feet/hour you are
drilling. Knowing your drill rate can immediately show a loss of production due to a dull bit or other
causes. Use the Drill Monitor to optimize your drill rate by adjusting feed pressure or rotation speeds and
see the results immediately,
TECHNICAL SPECIFICATIONS
Power supply: 12 Volts DC To 30 Volts DC Clinometer Specifications
LCD: 4 line x 20 character Large
8 mm high lettering Total Angle Range + / - 60 deg
Backlit: Linear Range + / - 45 deg
Temperature: -20 C to +70 C
-4 F to +158 F Threshold and resolution .001 deg
Power Linearity + / - .25 deg
Consumption: ON: 1.0 Amp Null to 10 deg + / - . 1 deg
OFF: 0.0 Amp 10 deg to 45 deg + / - 1 % angle
Box
Dimensions: Length 8,5 in (21,6cm)
Width 6.0 in (15.2 cm)
Depth 3.0 in ( 7.6 cm)
"""'"'""'"'""
GENERAL INFORMATION
The REO Single Circuit Blasting Machines are of solid-state capacitor discharge design.
They offer a wide variety of energy and voltage choices in a series of compact, lightweight,
portable, water and corrosion resistant enclosures, and are designed to provide extended
service under a variety of operating conditions.
CHARACTERISTICS
Capacity1 Weight
Model Volts Energy Power Source
Single Size
Parallel Series0 [Shipping Weight] (ALKALINE Batteries)
Series'2
0.8 IDS. (0.3 kg.) 4.1 x 2.2 x 3.6 in.
CD225-2J 225 2 Joules 35 Not recommended [2 Ibs. (1 kg.)] (10.5 x 5.6 x 9.0 cm.)
One 9 volt
0.6 Ibs. (0.3 kg.) Eveready 522 or equal
CD450-4J 4 Joules 65
[2 Ibs. (1 kg.)]
450
3.7 Ibs. (1.7 kg.) 9.0 x 8.0 x 3.4 in. Eight 1.5 volt "A A" Cells
CD450A-22J 22 Joules 100 200'4
{5 Ibs. (3 kg.)] (22.9 x 20.3 x 8.6 cm.) Eveready E91 or equal
5.2 Ibs. (2.4 kg.) 10.3 x 7.3 x 4.1 in. Eight 1.5 volt "C" Cells
CD450B-50J 50 Joules 105 500*5
[7 Ibs. (3 kg.)] (26.2 x 18.5 x 10.2 cm.) Eveready E93 or equal
10.6 Ibs. (4.8 kg.) 9.5 x 8.1 x 6.2 Twelve 1.5 volt "D" Cells
CD600B-100J 600 100 Joules 140 1000'6
(14 Ibs. (7 kg.)] (24.1 x 20.6 x 15.7 cm.) Eveready E95 or equal
#1 2 ohm EB detonators based on US standard detonator rating of 20 millijoules/ohm delvered in 5 milliseconds. Contact your powder company for recommendations.
#2 12 ohm maximum lead line.
#3 3 ohm maximum lead line.
#4 4 series of 50 2 ohm EB detonators.
#5 8 series of 63 2 ohm EB detonators.
#6 1 1 series of 91 2 ohm EB detonators.
GENERAL INFORMATION
The REO BM175-1 OPT Sequential Blasting Machine is a mod-
ern easy-to-use programmable timing machine meeting the spe-
cial requirements of bench blasting operations where precise mil-
lisecond/microsecond accuracy is critical.
Programmable timing permits the blaster to take full advan-
tage of greater accuracies offered by the new electric detonators
toward desired safety, fragmentation, and seismic frequency of a
blast.
The BM175-1 OPT is available in master and slave models. In
applications where more than 10 circuits are required, multiple
10-circuit slave units can be added as necessary. Each is pro-
BM175-1 OPT
grammable from 1 to 999 milliseconds, and on special require-
ments, selections of microsecond increments are offered
The BM175-1 OPT is also available in two remote models.
Outside
Dimensions Lining Approximate Part
Description L x Wx H___Thickness Case Capacity Number
"D & L Thomas" truck magazine. 60" x 30" x 24" 2" 11 TM112
Separate compartments for
blasting caps and dynamite.
Meets 1MB specifications 22. 42" x 24" x 24" 2" TM42
Integral locking mechanism.
Lined with 2" wood. Brackets for
bolting down to truck bed. Fits
into standard size truck body in
front of wheel wells.
Part
Description Number
"Master" Lock, Size 15. TM15
Meets ATF specifica-
tions. 7/16" hardened
shackle. Available
keyed alike. Protect
your investment.
Outside
Dimensions Lining Approximate Part
Description LxWxH Thickness Case Capacity Number
"Tread" magazines are built to 42" x 42" x 33" 3" 12 TM123
meet rigid government specifica- 4" 12 TM124
tions as set forth in the IME rules 42" x 42" x 42" 3" 24 TM243
and regulations. Constructed of 4" 24 TM244
1/4" hot rolled steel plate and full 72" x 48" x 48" 3" 40 TM403
thickness hardwood. Hinge pins 4" TM404
40
are hardened and hinge barrels
and lock staples are made from 66" x 60" x 60" 3" 90 TM903
alloy steel for extra protecion. 4" 90 TM904
Available as permanent or por- 66" x 66" x 84" 3" 108 TM1083
table. Doors are sheared from 4" 108 TM1084
the side to provide a close fit and 66" x 84" x 84" 3" 144 TM1443
have drip protection from the 4" 144 TM1444
weather. The first inner layer of 96" x 84" x 84" 3" 200 TM2003
hardwood is bolted in place with 4" 200 TM2004
successive layers attached by air
132"x84"x84" 3" 320 TM3203
staples. Screened ventilators
4" 320 TM3204
prevent the packing of explosives
from hindering ventilation.
10-Cap
Features
DEPENDABILITY — always ready-to-fire,
anytime, anywhere, and under varied climatic
conditions.
REPEATABILITY — consistent results, blast
after blast after blast.
CAPACITORS — no capacitors to replace.
BATTERIES — no batteries to replace.
LONG OPERATING LIFE — built stronger
to last longer.
MAXIMUM EFFICIENCY — conversion of
manual energy to electrical output achieved
through minimum number of wearing parts.
SAFETY FEATURE — current does not flow
until maximum capacity is achieved at end of
the stroke.
PROVEN PERFORMANCE — on-the-job
performance by satisfied users since 1918.
MINIMUM MAINTENANCE — only occa-
sional lubrication to assure smooth operation.
Unaffected by long storage or hard service.
Basic Specifications
MODEL
RATED PEAK OUTPUT APPROX. CASE DIMEN. HEIGHTS SHIPPING
CAPACITY* OHMS AMPS. VOLTS OPERATION CONSTR. OF CASE INC. HDL. WEIGHT
10-Cap 50 2 100 Twist-Handle Brass 31/2x4x51/2 8 In. 51/4Lbs.
*Based on Regular Blasting Caps with 30 foot copper leg wires connected in straight series. Output data for reference only —
subject to revision according to firing conditions.
Warranty: Each unit is warranted to be free from defects in material and workmanship if properly operated, maintained and
stored for a period of one year from date of shipment. Our obligation under this warranty is limited to correcting or replacing
without charge at our Factory, transportation charges prepaid, any part or parts which shall disclose to our satisfaction to have
been originally defective. We shall not be liable for loss, damage or expense resulting from the use of this product nor any
repairs made outside of our Factory.
Service: Manufacturer provides a complete repair service and spare parts are readily available for all models.
TKAH-1
Safety Warning
Vests Flags
3 Styles 13", 18"
Series 800 available or 24"
Barricades
Lengths: 3', T-Stands
4', 6' or 8' Accommodate
30", 36" or
48" Signs
H-300
Stand
with 30"
Sign
ROAD
CLOSED
Flagman
Helpers
Type II
Barricade
E-Stand
Economical
and versatile
Full-Port Ball Valves Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
double female type, handle stop, Thomas-
material brass, chromed ball, PTFE-seal Part No. KNI 18T KNI 14T KNI 38T KNI 12T KNI 34T KNI 10T KNI 54T KNI 1ST KNI 20T
working pressure 600 psi WOG 600 Port Diameter .314 .314 .393 .590 .787 .984 1.259 1.574 1.968
Price $
Universal Couplings, Female Thread Size 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
with two lug, female N.P.T. ends, Thomas-Part No. KIA38 KIA12 KIA34 KIA10
malleable iron/plated DIXON-Part No. AMC AM-3 AM-8 AM-13
Le-Hi-Part No. UF-37-M UF-50-M UF-75-M UF-100-M
Price $
Universal Couplings, Male Thread Size 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
with two lug, male N.P.T. ends, Thomas-Part No. KAA38 KAA12 KAA34 KAA10
malleable iron/plated DIXON-Part No. AMB AM-2 AM-7 AM-12
Le-Hi-Part No. UM-37-M UM-50-M UM-75-M UM-100-M
Price $
Super-Safety Coupling Size Stand. Hose Barb 3/4 Male Thread 3/4
with two lug Thomas-Part No. SSC19 SSCM 34
• Easy to couple by rotating the swivel Price $
• Interchangeable with Universal Couplings
(also available with steam-resistant washer)
• Special safety against accidents
Washers, oil resistant for Super-Safety Couplings Part No. TGOOR Price $
Washers, oil resistant for Universal Couplings Part No. TGOORR Price $
Washers, steam resistant for Universal Couplings Part No. GDOR Price $
Universal Safety Clips for Universal Couplings Part No. USC Price $
Hose Menders Standard Hose Barb 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Thomas-Part No. HM38 HM12 HM34 HM10 HM125 HM150 HM200
steel/plated DIXON-Part No. DMB DM-1 DM-6 DM-11 DM-16 DM-21 DM-26
i _ i i: n _ * M_ t 1 r\-i r> 1 1 rn O 1 1 -ir O n j nn O M( ^ nr O 1 1 ^ rr\ O
-3L-SERIES
Standard Hose Barb 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8
Male Thread Size 1/8 NPT 1/4 NPT 3/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT
Thomas-Part No. 3L-23 3L-25 3L-26 3L-27 3L-28 3L-30 3L-31 3L-35
DIXON-Part No. 3501 3502 3504 3505 3506 3508
Le-Hi Part No. N-4x2-S N-4x4-S N-4x6-S N-6x4-S N-6x6-S N-6x8-S
Price $
tf
Thread Thread Tfcm< Thread
Jim •^^k j l 1
I
1 <J!F
Steel or Steel or Steel or
Mat Iron Mat Iron MaL Inn
Plated Mall.
STEM 2-Bolt Type Hose Hose O.D. Part No./
Iron
I.D. From: To: No.: Box:
Part 2Vie" B-24 25
Numbers: Hose Hose O.D. Part No./ 21/4" 21/2" 250 * 25
MSA I.D. From: To: No.: Box: 215/32 223/32" B-25 25
%" MSC 1
/4" 9
/16" 21
/32" BD 25^ 21/2" ~2 2 %2" BU-29 25
V2 MS-1 25 CD 25 21/2" 23/4" 275 * 25
%" MS-6 25 15
/ie DD 25 23A" 3Vi6 B-29 25
1" MS-11 25 1Vi 6 " B-4 25 23/4" 3Vie" 3O6* 25
1 ;/
1
1 /4 MS-16 25 B-5 25 3 /16 3V2 35O * 25
1V2 MS-21 25 3/4" T3/16" BU-9 25 33/32'' 37/ie B-30 25
2" MS-26 25 3
/4" 11/2 B-9 25 31/2" 3% 375*
21/2 MS-31 6 3/4" e B-10 25 21/2" 31/2" 315/ie" B-34
3 MS-36 6 4" 4O1
4 MS-46 Pltd. Mall. Iron *4- Bolt Type 3" 313/ie" 43/ie" B-35
5 MS-51 with 4 Gripping 4" 43/ie" 418*
6 MS-66 Fingers 3" 4Vi6" 47/i6" B-39
43/ie" 41/2" 450 *
4-Bolt Type
LP-BOSS" Male Stem, with 2 Gripping
Style LP Fingers Three-piece, six-bolt "BOSS" Clamps
Non-Porous Tubular Steel for O.D.
Volatile Materials. To: Plated
1 1/32" Malleable
STEM 1" 113/32" 19/16" 156 25 Iron
1" 1 17 /32" 1 23 /32" BU-14 25
Hose Hose O.D. Part No./
1" 1 %" 127/32" B-14 25 I.D. From: To: No.: Box:
Sizes: Part Numbers: 111
/16" 7
1 /8" 187 * 25
2" " 3" 37/ie BS-29 ____
11/4 LP-16 1 17/8" B-15 25
4 41/4" 413/ie BS-39
1V2 LP-21 7
1 /a" 2Vie 2O6* 25
4' 4 /8" 7
5V4 BS-49
2" LP-26 21/8" 21 2 25
4" 51A" 519/32" BU-49
2V2 LP-31 2W B-19 25
517/32" 515/ie" B-49
3 LP-36 21A" 225* 25
_ 6 /8" 7%" 750*
7
SPECIFICATIONS:
MATERIAL: Anodized Aluminum body, with Nickel Acetate-sealed An-
odized Aluminum Cone and Piston (except 1/2" series-Celcon Cone),
ORDERING INFORMATION:
Mode! Number Dimensions
Stainless Steel Springs and Nickel-plated Alnico Magnet.
Row* w/Plugged w/Gauge O.D. Length Weight
PRESSURE RATING: Flow Meter body is 600 PSI-Rated, with 10:1 Port Range" Gauge Port Installed In In Wrench (Ibs.)
Safety Factor. Total Assembly is limited by 150 PSI-Rated Pressure Size @ 100 PSI NPTF NPTF (mm) ImrnT Flats w/piu,
1- 4 SCFM 277-004 279-004 1.4" 6.3" 1-1/4" 0.5 1.2
Gauge. For higher pressures, consult factory.
1/4" 2- 9 SCFM 277-009 279-009 (35 mm) (160mm)
PRESSURE DROP: See A P Charts 2- 18 SCFM 277-018 279-018
4- 24 SCFM 277-024 279-024
TEMPERATURE RATING: 240T. Max. (except 1/2" series-1 SOT.) For
2- 20 SCFM 677-020 679-020
higher temperatures, consult factory. 1/2- 10- 60 SCFM 677-060 679-060 1-5/8* 1.0 1.75
STANDARD SCALE: Multipressure Flow Scale standard. Calibrated 10- 110 SCFM 677-110 679-110 (46 mm) (203 mm)
20- 150 SCFM 677-150 679-150
in graduated SCFM (Standard Cubic Feet/Minute) at 1.0 Specific Grav- 4 - 18 SCFM 777-018 779-018
ity at various pressure levels from 40 to 130 PSIG, @ 70°F. 5 • 50 SCFM 777-050 779-050
3/4- 10- 90 SCFM 777-090 779-090 2' 1.75 2.3
THREAD: National Pipe Thread-Dry Seal (NPTF) standard. 25- 150 SCFM 777-150 779-150 (58mm) (224 mm)
METER GUARD & SCALE KIT: For Meter Guard & Scale Kits, Seals, 20 - 220 SCFM 777-220 779-220
and other replacement components, see "Parts and Accessories" sec- 20- 250 SCFM 877-250 879-250
25- 450 SCFM 877-450 879-450
tion in the Price & Availability Digest, Form 000141. 1-1/4" 50- 600 SCFM 877-600 879-600 2-1/2" 7.0 7.5
PRESSURE GAUGE SPECIFICATIONS: Model Series #279, 679, 50- 800 SCFM 877-800 879-800 (102mm) (325 mm)
100 -1000 SCFM 877-100 879-100
779 & 879 are offered with a Glycerin-dampened Bourdon Tube-type
' Indicate? Plow Range is nominal, calibrated 2 100 PSIG. at 70° F
Gauge, with a 250° sweep analog dial, with a 40-130 PSIG pressure
indication range. Model Series #277, 677, 777 & 877 are offered with a
removable 1/4" NPTF plug to facilitate easy field installation of user-
selected pressure gauge.
Part
General Service Lubricants Size Number
Motor Oil-High Detergent 1 qt. 15-40WT 15-40W-1Q
Dexron Automatic Trans. Fluid 1qt. TATF-1Q
Marfax Grease 14oz. cartridge TMARFAX
Methanol for Air Lines 1 gallon TMETH-1
Ether Starting Fluid TETHER-8
Anti-Freeze 1 gallon TAF-1
Plastigear-x 12 oz. cartridge Plastigear-x
Red Drydene Grease 12 oz. cartridge Pyroplex EP
Splitter Hydraulic Fluid 1 gallon Rand oz. 15-1
Ice Free Oil is used in all pneumatic 1 pt. / 1 liter ICE FREE OIL
tools especially where icing prob-
lems occur. Digtec Ice Free Oil pro-
vides protection against wear and
corrosion, even in Rock Drill Ham-
mers, it has extra high film strength
and remains fluid in -55°.
Part
Description Size Number
Rock drill oil. Heavy duty, extremely 100WT1 gal. RDO100-1
high film strength to minimize friction 100WT55gal. RDO1 00-55
and wear. Provides effective lubrica- 320 WT 1 gal. RDO320-1
tion in the presence of water. Resists 320WT 55 gal. RDO320-55
oxidation and gumming. Winter and
summer weights.
Non-returnable drums.
"D & L" super drill bit and coupling 11 oz. tube CARTL-1
lube. This product will prevent sei-
zures and thread damage on sectional 1 case of 25 ? CARTL-25
drill rod assemblies up to 300,000 PSI. Cartridge cradle CARTCR
Fingertip control eliminates undue
dust contamination and waste. Excel-
lent water resistance. This product is
pumpable to -5°F with exceptional re-
sistance to high temperatures. Your
satisfaction is guaranteed.
"D & L" super drill. Bit and coupling 5 Gal. Pail CL5
lube. Prevents seizures and thread
damage on sectional drill rod assem-
blies up to 300,000 psi. Excellent
water resistance. Pumpable to -5°F.
Exceptional resistance to high tem-
peratures.
Description Number
TMG1B die grinder. Ball bearing TMG-1B
supported four vane motor. Smooth
running, lightweight. 20,000 RPM, 1/
4" collet can be used with 1/8" collet.
Self-closing lever throttle. Hose in-
cluded.
Part
Description Size Number
"Thomas" button bit grinder can improve Grinder THG105
your tungsten carbide bit life by an amazing
200%!! This high-speed top-of-the-line grinder Super Diaroc Sharpening Pins
utilizes central water flushing and will restore Ballastic Style
worn tungsten carbide buttons to factory new 6 mm 2000-06 2000-06B
profiles. Increase your profits with an efficient, 7 mm 2000-07 2000-07B
reliable, easy to use tool. 8 mm 2000-08 2000-08B
90-115 PSI, 30CFM, 22,000 RPM, Wt. 8 Ibs. 9 mm 2000-09 2000-09B
10 mm 2000-10 2000-1 OB
Super Diaroc Grinding Pins offer 25-35% higher 11 mm 2000-11 2000-11B
penetration from 2 1/2" bits and larger. You will 12 mm 2000-12 2000-12B
get higher overall production and very little pres- 13 mm 2000-13 2000-13B
sure is required to make these tools cut. Con- 14 mm 2000-14 2000-14B
sider the obvious benefits and rewards of a bit 15 mm 2000-15 2000-15B
grinder. 16 mm 2000-16 2000-16B
17 mm 2000-17 2000-17B
Super Diaroc: A combination pin which grinds 18 mm 2000-18 2000-18B
the carbide button as well as the body, at the 19 mm 2000-19 2000-19B
same time. 20 mm 2000-20 2000-20B
22 mm 2000-22 2000-22B
Super Diaroc Pins also available in conical or 25 mm 2000-25 2000-25B
ballastic designs.
SUP DIAROC: A Combination Pin, which
grinds the button as well as the body, at the
same time.
OnlyllllH
Part
Description Cable Size Number
All specifications are general in nature and are not intended for specific
application purposes. Redro, Inc. reserves the right to make changes in
design, engineering or specifications and to add improvements or
discontinue manufacturing at any time without notice or obligation.
Specifications
^^^^Specification Weight Length Cylinder Dia Piston Stroke Steel
Machine Name^^^^^^^^ Ib. (kg) in. (mm) in. (mm) in. (mm) in. (mm)
TY40C-JS Stoper 91.5(41.5) 59-1/1 6" (1,500.0) 2-5/8" (66.7) 2-1 1/1 6" (68.0) 7/8" (22) Hollow Hex
TY280-JS Stoper 110.2 (50) 89-3/8" (2,270.0) 3" (76.0) 2-11/16" (68.0) 7/8" (22) Hollow Hex
Shank Size Air Hose Dia Water Hose Dia Drilling Type
in. (mm) in. (mm) in. (mm) (Wet & Blower)
Blows Per Speed Piston Piston Overall Hose Shank Air Recommended Minimum Net Wt. Ship Wt.
Minute (RPM) Dia. Stroke Length Size Size Consumption Air Pressure Compressor (Ibs.) (Ibs.)
1,800 200 2-5/8" 2-9/16" 22-3/8" 3/4" 95CFM 90 PSI 15 HP 59-1/2 63
CP-0032A-1
CP-0014RR CP-0022
Buster
Applications: Top performance
and operator comfort characterize
these tools; they are used for
cutting off large rivets and for
heavy-duty chipping work.
Features
• Boyer valve and long piston CP-4181-PUSER CP-4180-11
stroke—deliver the power
required to handle the toughest
All Models: air consumption: CP-4180-8 & CP-4181-PUSER 37 cfm at 90 psi; CP-4180-11 &
jobs CP-4181-PULER 38 cfm at 90 psi; type RB Chisel Shank; 3/8" (NPTF) air inlet thread.
• teasing throttle—precise control Capacity Rivet
• forged steel handle—designed entirig Bore and Overall Net
for long life under rugged Dteu Stroke Blows Length Weight
: ;
^ .: «v ! : ! j
. :IHi. • : • : • : : per WandteT : in. to,
conditions Catalog Number (mm) (mm) Minute Hrl^ger (mm) m
• hardened steel piston and CP-4180-S % 1His x:8 1080 Close**/ 23 32,5
cylinder—excellent wear (22.2) (30,2 x 203) Inside (584) (14.8)
resistance ; CP-4180-11 1 13/16 X 11 720 Closed/ 26 35.5
(25,4) (30.2x279) Inside \ (660) (16.1)
7
CP-4181-PUSER /$ Wie X 8 1080 Pistol/ 23 29
(22*2) (30,2 X 203) Outside (584) (13,2)
............. t ;
CP-4181-PULER mx 11 720 Pistol/ ' 26 33
(25.4) (30.2 X 279) Outside (660) (15.0)
Standard Equipment:
Two spare rubber bumpers, P-072334
Lower sleeve, P-072333
Upper sleeve, P-144720
RIVET BUSTER TOOLS Wire retainer spring, P-073942
X
^H
SIDECUT
CHISEL
10"
12"
T23B10
T23B12
2
2-1/2
iH 18" T23B18 2-3/4
RIVET SIZE PART NUMBER WEIGHT
3/8" T24B10 2
BACKOUT 1/2" T25B10 2
—— 1-1/8" -
o
r| ^^———-^
CQ
5
PUNCH
10"
5/8"
3/4"
7/8"
T26B10
T27B10
T28B10
11X HEAT EXCHANGER TUBE BACKOUT PUNCHES
2
2
2
CP-4123-PYRA CP-4127
CP-4100-3R
CP-4121-3R
CP 4100 SERIES
Powerful, lightweight Chipping Hammers/Needle Sealer
Features AH Models
D Lightweight — makes tools easy to handle and maneuver; D Inside trigger — provides protection from external dam-
permits one-handed operation in overhead applications. age. Permits a solid comfortable grip and helps prevent
U Powerful — transmits maximum amount of impact energy accidental start-up.
to the chisel. D Moveable deflector — reduces sound level. Allows ex-
D Screw-on retainer — provides a positive lock of chisel to haust air to be directed away from operator. 3" stroke model
tool. Includes resilient bumper to absorb shock, has an additional integral muffler which further reduces sound.
D Chisel release spring — lifts chisel out of piston striking D Steel cylinder and aluminum handle —reduce mainte-
area with retainer removed. nance and extend tool life.
D Simplate valve — gives smooth powerful operation, which D Low air consumption — saves energy. Requires less
results in low maintenance; is easy to service. compressor capacity
D Ergonomic closed grip "D" handle — locates operator's D Choice of 2" and 3" stroke lengths— allows operator to
hand in-line with chisel for maximum effectiveness and opera-
tor comfort.
match tool to job requirements.
D Choice of round and hex bushings — round: chisel
CP4121 SERIES
Q New teasing throttle design —provides precise control of rotates freely; hex: stops chisel rotation. with vibration isolation system and unique air "lockout"mechanism
chisel.
Features AN Models
Specifications
All models: Closed grip handle with inside trigger, %" (NPTF) air nlet thread, air consump i on at 90 PSI: 13cfm-16cfm. high and low frequency vibration transmitted to the operator, operation, which results in Iaw maintenanc e; is easy to
Bore and Chisel Overall Net
without compromising tool performance; is effective over a
Stroke Blows Length Weigh, wide range of operator applied orce. Has minimal effect on D Moveable deflector — all DWS exhaust air o be directed
Catalog
CP-41 00-2R
Type of
Closed Grip
(mm)
% x 2 '/2
per
3000
"37
.680
in.
(mm)
13"
(kg)
5 1 /4
ool length and weight.
H Unique air "lockout" mechanism, patented by CP —
automatically stops air flow to the tool if retainer is loosened
away from operator.
D Hardened steel piston an J cylinder, alunlinum handle
xtend tool life.
Inside Trigger (19x64) (17.3) (330) (2.4) or removed; helps prevent chisel from being accidentally D Choice of 1", 2", 3" and4" stroke leng hs— allows
Round Type A-6 ejected. Tool remains disarmed until retainer is correctly operator to match tool to job equirements.
CP-41 00-2H Closed Grip % x 2 1/2 3000 .580 13" 5 'A
eplaced. D Choice of round and he round: chisel
Inside Trigger (19x64) (14.7) (330) (2.4) H Screw-on retainer — provides a positive lock of chisel to rotates freely; hex: stops chis el rotation.
Hex Type A-7 ool; has resilient bumper to absorb shock of chisel when
CP-41 00-3R Closed Grip % x 3 </2 2500 .680 15" 6 1 /8
driven forward. Retainer acts as integral part of the "lockout"
Inside Trigger (19x89) (17.3) (381) (2.8) mechanism.
H Inside trigger — provides protection from external dam-
Applications
Round Type A-6
CP-41 00-3H Closed Grip % x 3 !/2 2500 .580 15"
age. Permits a solid comfortable grip. The CP 41 21 Series Chipping Hammers are powerful tools
Inside Trigger (19x89) (14.7) (381) (2.8) II Ergonomic closed grip "D" handle— locates operator's with significantly reduced vib ration levels, They are de-
Hex Type A-7 hand in-line with chisel for maximum effectiveness and signed for light to medium de nolition of cone rete, stone or
operator comfort. masonry structures, and mets I removal in br dge work and
Closed grip handle with inside trigger, %" (NPTF) air nlet thread, a r c o nsumption at 90 PSI 12 cfm. J New teasing throttle design — provides "ring valve" steel erection. These tools a e also well sui ed for a wide
control. variety of chipping and cutti ng applications in foundries,
Bore and Net HI Forward entry air-inlet — improves tool balance and petrochemical plants and ship yards.
Stroke Blows Dia. No. Length Weight educes pulsating air effect felt by the operator. Bu It-in air
Catalog Type of in. per Needles in.
Number Handle (mm) Minute (mm) per tool (mm) (kg) nlet screen keeps out foreign objects.
CP-41 00-NS Closed Grip 4200 % 16 16" 5!/2
Inside Trigger
% X 1 1/4
with uniqu 3 air "lockc>ut" mechanism (28.6x25.4) Hex. Type A-7/A-4 (429) (7.5)
CP-41 21 -2R 1 Va x 2 2400 .680(17.3) 17% 17V 2
Feature*> All Models (28.6x51) Round Type A-6/A-3 (448) (8.0)
D Unique air "lo ckout" mechani sm, patented by CP — D Redesigne d simplat s valve — gives smooth powerfu CP-41 21 -2H 1 Va x 2 2400 .580 (14.7) 17% 171/2
automatically stop s air flow to the toe I f retainer is loosened or operation, whi :h results in low maintenance is easy to service, (28.6x51) Hex. Type A-7/A-4 (448) (8.0)
removed; helps pr vent chisel from being accidentally ejected. LJ Moveable deflector air to be directed
CP-41 21 -3R 1 Vs x 3 1920 .680 (17.3) 19% 19
Tool remains disa med until retaine s correctly replaced. away from op srator.
(28.6x76) Round Type A-6/A-3 (498) (8.6)
D Screw-on reta ner — provides a positive lock of chisel to CH Steel pisto n, cylinder and handle — re duce maintenance
tool; has resilien bumper to abso b shock of chisel when and ex end to ol life. CP-41 21 -3H 1 Ve x 3 1920 .580 (14.7) 19% 19
driven forward. R >tainer acts as inte gral part of the "lockout " CH Choice of 1", 2", 3" and 4" stroke Iengths — allows (28.6 x 76) Hex. Type A-7/A-4 (498) (8.6)
mechanism. opera or to m itch tool to ob requirements
D Two-bolt flan ged connection between cyl nder and LJ Choice of round and hex bushings — round: chisel CP-41 21 -4R 1 VB X 4 1500 .680 (17.3) 20% 20
handle — for fas easy service. P s tive handle- o-cylinder rotates freely; hex: stops ch sel rotation. (28.6x102) Round Type A-6/A-3 (530) (9.1)
joint reduces parts breakage.
CP-41 21 -4H 1 Vs x 4 1500 .580(74.7; 20% 20
U Ergonomic clc sed grip "D" har die— locates operator's
hand in-line withe effectiveness and opera-
AnnllC
*»HH"*-
ationS (28.6x102) Hex. Type A-7/A-4 (530) (9.1)
or comfort. The CP 4120 Series Ch aping Hammers are powerful tools
D Inside trigger — provides prote ;tion from externa dam- designed for I ghttomed um demolition of concrete, stone or
age. Permits a so id comfortable gr tures, and metal removal n bridge work and
U New teasing throttle design — provides "r ng valve" steel erection These to ols are also wel suited for use in
control. foundries, pe rochemica plants and ship yards for a wide
D Forward entry ves tool balance and re- varie y of chip ping and c tt ng applications
duces pulsating ai effect felt by the operator. Built-in a r inlet
screen keeps out oreign objects.
Specifications
All Models: Closed grip handle with self-closing inside trigger; 1/2" (NPTF) air inlet thread; air consumption at 90 psi, 23-27 cfm.
Overall
Stroke Blows Bushing Length' Weight*
Catalog in. in.
(mm) MCfute (mm) (mm) (kg)
CP-41 20-1 R 1 Va X 1 2820 .680(17.3) 14 1
/4 15
(28.6x25.4) Round Type A-6/A-3 (362) (6.8) CP-4120-3R
CP-41 20-1 H 1 Va X 1 2820 .580 (14.7) 14V4 15
(28.6x25.4) Hex. Type A-7/A-4 (362) (6.8)
CP-0071E/CP-0077
Applications: The CP-0071E and
CP-0077 sludge pumps easily handle
water containing 15% solids and
particles up to 1" in size. They are
suitable for pumping sea water and CP-0071 E
certain corrosive chemicals.
Features
• operates on venturi/ejector
principle—no motor or diaphragm
to wear out
• exhaust muffler—reduces sound
level
Caution
CP-0071 E and CP-0077 pumps Air consumption at 90 psi: CP-0071 E 91 cfm; CP-0077 85 cfm.
are not intended for pumping Max.
Suction Lift*
Max.
Head Discharge
Net
Weight
Air Inlet
Thread
Recom.
Hose Size Pump
flammable fluids. Catalog
Number
ft.
(m)
ft.
(m)
Outlet
(NPT)
Ib.
(kg)
Size
(NPT)
in.
(mm) Discharge
CP-0071 E 20" 200** 21/2" 97 3/4» 1 Table A
(6.10) (61) (44) (25.4)
CP-0077 20** 175** 21/2" 152 3/4" 1 Table B
(6.10) (53) (69) (25.4)
"Includes friction head from hose.
Pumps
Sump
CP-0010, CP-0020
Applications: CP-0010 and CP-0020
sump pumps are designed with the
performance and durability which
make them ideal for removing water
from trenches, ditches, manholes,
industrial sumps and excavations.
Will pump down to within 7/8" from
base. CP-0020
CP-0010
Features - All Models
• single-stage centrifugal units driven
by powerful vane motors
• double seals protect bearings and
motor from water and mud
• integral oiler provides continuous
lubrication
• integral strainer, air inlet valve
• bronze impeller
• cast-iron housing
Caution
CP-0010 and CP-0020 pumps
are not to be used for pumping
flammable fluids.
Impact Wrenches
Standard—3/8" to 1/2" (10 mm to 13 mm) Bolt Capactiy
The following selection of Chicago CP-6440
Pneumatic impact wrenches is well suited • CP pioneered "rocking dog" clutch—for
to construction equipment maintenance superfast run down, achieving torque level
work. These tools are all designed to quickly—ideally suited for soft- or hard-pull-
withstand tough use, have heat treated up conditions
internal parts, and feature CP-proven • 3-piece construction provides easy access
clutches. A wide variety of accessories is to all moving parts
available from CP to further extend the • oil bath clutch chamber for constant
versatility of these tools. lubrication and added durability
CP impact wrenches in this section are CP-9540
classified by bolt capacity.
• CP designed pin clutch for fast run down
Features and high torque build-up—ideal for hard ;
CP-9525 pull-up applications :
• powerful and efficient two-jaw clutch for • oil bath clutch chamber for constant
controllable power with minimal air lubrication
consumption • integral speed regulator to match tool
• teasing throttle for easiest fastener output to job requirements
starting CP-9541
• integral speed regulator to match torque
to job requirements • CP designed pin clutch for fast run down
• heat-treated internal parts for durability and high torque build-up—ideal for hard-
pull-up applications
• 3-piece construction provides easy access CP-9540-RSR
to all moving parts-facilitates maintenance
• steel clutch housing stands up to rough use
All Models: W (NPTF) air inlet thread air consumption at 90 psi: CP-9525 12 cfm; CP-6440 16 cfm; CP-9540 13 cfm;
CP-9541 13 cfm; CP-9547 18 cfm.
Capacity Side to Overall Net
Bolt Dia. Shank Center Length* Weight
Catalog Number
CP-9525-RSR
in.
(mm)
3/8 (10)
KK£
Side
Size
in. (mm)
% (10) Square
Retainer
Type
Friction Ring 15
in.
(mm)
/ie (24)
in.
(mm)
5Ve (1 30)
Ib.
fig)
2*/B(1.1)
All Models: Self-closing lock-off lever throttle, YV (NPTF) air inlet thread size; air consumption at 90 psi: CP-9108 22 cfm; CP-9113 32 cfm.
Spindle thread and projection: CP-9108 M10 x 1.25; CP-9113G 3/e"-24 x 9/is".
Wheel Capacity in. (mm) Overall Length Outside Net Weight
Type Spindle Free Speed Less Guard Diameter Less Guard Motor
Catalog Number Housing Dia. Width rpm in. (mm) in. (mm) Ib. (kg) H.P.
1
CP-9108-R Short /4" collet 24000 53/4 (146) 5
1 /8 (41) r/*(o.6) .5
CP-9113-G Short W
1
collet — 25000 61A (159) 15/8 (41) 2 (0.9) 1.0
CP-9113-GES Extended /4" collet 25000 W/a(283) 5
1 /8 (41) 3 (1.4) 1.0
Standard Equipment:
CP-9108-R, CP-9113-G: Chuck wrenches (2), C-116858 (9/i6") and C-119327 (3/4"); VV (6.4 mm) collet KF-124524
CP-9113-GES: Integral Erickson chuck and VV (6.4 mm; collet, C-119729
Optional Equipment: (6.Omm) collect, KF-130372
Scabbier
Applications: The CP-0006 Scabbier is
the ideal tool for cleaning and roughening
concrete and construction joints. The tool
can also be used to produce ornamental
or contrasting finishes on road and
building structures.
Features CP-0006
• lightweight, compact tool with con-
toured grip handle—reduces operator
fatigue; increases output All Models: Va" (NPTF) air inlet thread; air consumption 29 cfm at 90 psig.
• tungsten carbide-tipped pistons—last
longer; are easily replaced Height
(Pistons
• backhead grip—gives in-line thrust Weight Length Stroke Blows Bore Ext'd.) Width
• chamfered cylinder block—increases Catalog Ib. in. in. per in. in. in. No. & Type
visibility of the workpiece permitting Number (kg) (mm) (mm) Minute (mm) (mm) (mm) of Pistons
close-up operation in corners CP-0006 10 16.57 1 3000 1.103 7.76 4.37 Three
(4.54) (411) (25) per (28) (197) (111) 4-point
piston carbide
tipped
CONCRETE VIBRATORS
Standard Features:
• Three head diameters to choose from:
1-1/2", 2-1/2" and 3"
• Variable speed throttle
• In-line lubricator
• Auxiliary air hose
CP-2190
• Locked motor end plates
Specifications:
All models: 1/2" NPTF a
Capacity Head Dimensions
Radius of Length w/o
Catalog aggregate Vibration per Length Net Weight Aux. hose C.F. M.
in. (mm) in'Tmm) Ib. (kg) Average
CP-1150 9-10 25 10,000 1-1/2 18 16 86 28
(228.6-254.0) (38. 1) (457.2) (7.3) (2184.4)
CP-2190 15-16 55 12,000 2-1/2 13-3/4 27 118 65
(381.0 - 406.4) (36.5) (349.3) (12.3) (2997.2)
Standard Features:
• Chicago Pneumatic 4 hp motor
• One-hand operation blade guard
• Integral oiler
• Lock-off trigger
• Direct drive operation
• Two position handle
Specifications:
1/2" NPTF air inlet, 85 cfm
Blade Arbor Dia. Weight with Blade Overall Leigth Max. Cutting Depth Blade Cap
Catalog No Load Ib.
Number rpm (Kg) (mm) (mm)
1 28 26-1/2 4 14
CP-0044 (25.4) 4800 (12.7) (673. 1) (101.6) C355.fi)
SHANK SIZE (in) Hex or Round Hex or Round Hex or Round Hex or Round BUTT SIZE 6"
SHANK SIZE (in) 1-1/8 Hex x 6 SHANK SIZE (in) 1-1/8 Hex x 6 SHANK SIZE (In) 1 Hex x 4-1/4
1-1/4 Hex x 6 1-1/4 Hex x 6
Technical Data
^Illllil;
Type RH571-5L
1
RH571-5LS RH 658-5L
1
RH 658-5LS
Order no. 8311 0301-29 8311 0301-37 8311 0302-77 8311 0302-85
Air requirement at 6 bar (87 psig) l/s (cfm) 37 (78.5) 37 (78.5) 56(119) 56(119)
Rate of penetration1) mm/min (in/min) 295(11.5) 275(11) 425 (16.5) 410 (16.1)
Impact rate blows/s 37 37 34 34
Length mm (in) 510 (20) 510 (20) 565 (22) 565 (22)
Weight kg (Ib) 17.8 (40) 18.9(42) 24.0 (53) 25.0 (55)
1)
With 33 mm (1-19/64") chisel bit in granite at a working pressure of 6 bar (87 psi)
Technical data.
Designations: C - Cap (screw cap) D - D-handle T - T-handle S - Silenced W - Water-flushed
5f
Rock drill1)
Type BBD 12 DC2' BBD 12 DCS2' BBD 12 D BBD 12 DS BBD12T BBD 12T-01
f
BBD12TS BBD12TW 4 ) BBD12TW-01 4 '
Order No. 8311 0101-47 8311 0101-54 8311 0102-46 8311 0102-79 8311 0102-87 8311 0102-95 8311 0102-61 8311 0103-03 8311 0103-11
Std. chuck 19 x 108 19 x 108 19 x 108 19 x 108 19 x 108 22 x 108 19 x 108 19 x 108 22 x 108
mm (in.) (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (7/8x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (7/8x4-1/4")
Air Req.3'
l/s(cfm) 24(51) 22 (47) 24(51) 22 (47) 24(51) 24(51) 22 (47) 20 (43) 20 (43)
Length
mm (in.) 560 (22) 560 (22) 565 (22.2) 565 (22.2) 505 (20) 505 (20) 505 (20) 505 (20) 505 (20)
Net weight
kg (Ibs) 9.6(21.2) 10.5(23.1) 9.8(21.6) 10.7(23.6) 11.1 (24.4) 11.1 (24.4) 12.1 (26.7) 11.2(24.7) 11.2(24.7)
1) 2 3) 4)
AII models have connection for >DC models designed for max 29 At working pressure of 6 bar (87 psi) Water requirement at 6 bar (87 psi) 4. 5-
hose with 16 mm (5/8") inner diam- mm (1-9/64") hole dia and with the RPM — 200, Piston 0 — 45 mm mm, 10 gal/min Water hose dimension
eter screw cap fitted (1-3/4") Stroke 40 mm (1 5/8") 12.5 mm (1/2")
Technical data
Type Weight Air Length Impact Shank
requirements rate size
kg Ibs l/s cfm mm in Hz Blows/min mm in
TEX17E,23E,
33E and 43E
The TEX-E (E for ergonomics) range
will handle the really tough jobs in
the construction industry. To make
it easier for the operators and en-
sure even better results, these pneu-
matic breakers have entirely new
features compared to standard
Technical data
equipment—especially with regard
to ergonomic design. Type Weight Air Length Impact Shank
requirements rate size
Although great attention has been kg Ibs l/s cfm mm in Hz Blows/min mm in
paid to ergonomics, impact energy TEX17E 21.5 47.4 17.9 37.9 555 22 27.2 1630 22 x 82.5 7/8x3-1/4
is very high in relation to weight. 22 48.5 22 x 1 08 7/8x4-1/4
22 48.5 25 x 1 08 1 x 4-1/4
TEX-E breakers are easier on the
TEX 23E 27.4 60.3 24.8 52.0 655 26 22.5 1350 25 x 1 08 1 x 4-1/4
operator and less tiring, and thus 27.4 60.3 710 28 28 x 1 60 1-1/8x6-1/4
much more productive than other 27.7 60.8 32 x 1 60 1-1/4x6-1/4
hand-held breakers on the market. TEX 33E 35 77.0 29.0 61.4 820 32 18.0 1080 28 x 1 60 1-1/8x6-1/4
35 77.0 32 x 1 60 1-1/4x6-1/4
Thanks to a simple, trouble-free de- TEX 43E 40 88.0 32.5 68.8 840 33 18.0 1080 28 x 1 60 1-1/8x6-1/4
sign, minimum maintenance and 40 88.0 32 x 1 60 1-1/4x6-1/4
TEX16 —TEX42
TEX 16 to TEX 22 are lightweight TEX 22—TEX 42 have a built-in,
pneumatic breakers especially de- automatic lubricator which pro-
signed for work directed down- vides perfect lubrication through-
wards in the construction industry. out a shift.
They are ideal for: Design modifications eliminate the
—light construction demolition risk of freezing and further increase
—asphalt breaking operating reliability.
—breaking up frozen ground TEX 16—TEX 42 are supplied with
—digging a kick-latch retainer for rapid,
—breaking non-consolidated rock simple tool change.
TEX 32 and 42 are in the medium
The great variety of tools available
class of pneumatic breakers. They gives these breakers a wide range
are suitable for basically the same of applications for the most eco-
applications as above, but have a nomical use.
heavier weight, higher output and
greater capacity. For TEX 42 and
TEX 43E a conversion kit, TEP, for
pile driving is available.
Technical data
Type Weight Air Length Impact Shank
requirements rate size
kg Ibs l/s cfm mm in Hz Blows/min mm in
TEX 16 14.8 32.6 17.9 38 570 22-1/2 25.0 1500 22 X82.5 7/8x3-1/4
15.0 33.0 22 x 1 0 8 7/8x4-1/4
15.3 33.7 25 x 1 0 8 1 x 4-1/4
Standard equipment TEX 16S 16.0 35.3 17.9 38 570 22-1/2 25.0 1500 22 X82.5 7/8x3-1/4
16.2 22 x 1 0 8
Kick=latch retainer for the tool. 16.5
35.6
36.3 25 x108
7/8x4-1/4
1 x 4-1/4
TEX 22 (S), TEX 32 (S) and TEX TEX 22 22.0 48.4 24.8 52 650 25-1/2 22.5 1350 25 x108 1 x 4-1/4
22.6 49.7 28 x160 1-1/8x6-1/4
42 (S) have a built-in lubricator. 22.9 50.2 32 x 160 1-1/4x6-1/4
All breakers are supplied com- TEX 22S 23.9
24.5
52.5
54.0
24.8 52 650 25-1/2 22.5 1350 25
28
x108
x 160
1 x 4-1/4
1-1/8x6-1/4
plete with fitted claw coupling. 24.8 54.5 32 x160 1-1/4x6-1/4
TEX 32 28.7 63.0 29.0 61 725 28-1/2 18.0 1080 28 x 160 1-1/8x6-1/4
29.0 63.8 32 x160 1-1/4x6-1/4
TEX 32S 30.7 67.5 29.0 61 725 28-1/2 18.0 1080 28 x160 1-1/8x6-1/4
31.0 68.0 32 x160 1-1/4x6-1/4
TEX 42 33.6 74.0 32.5 69 740 29 18.0 1080 28 x160 1-1/8x6-1/4
34.0 74.8 32 x160 1-1/4x6-1/4
TEX 42S 35.7 78.0 32.5 69 740 29 18.0 1080 28 x160 1-1/8x6-1/4
36.0 79.0 32 x 160 1-1/4x6-1/4
r
with 19 mm (3/4") chisel bit in granite ** with 19mm (3/4") chisel bit in concrete
Vibratfon-
New vibration-
dampening handles have
reduced vibration levels
from 8 to
Easy to start
With a new choke control, €asx to
new carburettor and user- The Cobra Com hi weighs just
friendly instructions, the 55 ibs, it comes with its own
Cobra Combi is easy carrying case which fits easily
to start into the trunk of your car.
ISHIIII liiit!
Powered Drill/Breakers
Part
Description Size Number
WOODINGS DOWELING
TECHNOLOGIES, INC.
MV-50 DOWELMASTER*
Hydraulic Doweling Drill
• Single lever operation
• Fast penetration, with hole sizes up to 1 -3/4"
• Portable and lightweight for fast set-up and drill
time
• Low pressure hydraulics for long life with fewer
repairs
• HH-50 rock drill readily detaches for hand held
use. Air Patchee One front end can be substi-
tuted if required
SPECIFICATIONS:
Weight......................................................... 120lbs.
Length ................................... 47" (others available)
Drill travel............................................................18"
Oil required ................................................... 7 GPM
Pressure .......................................... 1500-2000 PSI
Flushing air................................................. 15 CFM
Part
Description Size Number Price
"Darda" splitters break reinforced Eico Offers a Complete, Compact and Powerful Hydraulic Demolition System
concrete and all types of rock. No DARDA CYLINDER SPECIFICATIONS
shocks or vibrations. Over 700,000 Model #12 #9 #2
230 Volts, 6 -
Complete unit consists of a cylin- 12 Amps.
METHOD OF OPERATION
The hydraulic concrete-splitting cylinder contains the plug &
feathers assembly consisting of the plug and two feathers.
These are inserted into a pre-drilled hole while plug is in a
retracted position. As the plug advances the two feathers
are being pushed aside tearing concrete apart. The action ENLARGE BREAKS - Two new DARDA C-8 splitters make initial 3/4" split
of the hydraulic cylinder is controlled by turning a single le- through 8 foot wall in seconds. Block to right has been split and expanded to 1 -
ver only, the plug can either be advanced, retracted or main- 7/8" maximum opening using widening feathers supplied as standard equipment
tained in any position.
U.S. and Foreign Patents with the C-8 splitter.
EMACO DIV.
PLUG LUBRICATION
INTERNATIONAL
INC.
Lubricant
SLP50 ................ 1/2 Pint
SLP100 ................. 1 Pint IMPROPER LUBRICANT REDUCES
THE SPLITTERS BREAKING POWER
The Joy Eye Wedge is a simple two-piece device for anchoring the tail sheave
at the face in a hole drilled for the purpose, it can also be used for many
other anchoring jobs underground.
Striking the wedge expands and locks the two pieces in the hole. Striking the
eye loosens the Shank for easy removal
Joy Eye Wedges are carefully made of special heat treated alloy steel
CG-600 Colloidal
Grout Plant
This complete, high production slurry
plant mixes and pumps cement slurries
at up to 20 gpm @ 225 psi. High speed
CG-540 Mixer & homogenizing colloidal mixer thor-
oughly wets each particle. Clean-
Spray System up in minutes. Drive power—air,
electric.
Designed for mixing and spray applica-
tion of quick setting cementitious materials
and for fast cleanup. Small batch capabil-
ity enables more application time. Pro-
vides 2 to 4 times greater productiv-
ity than other systems. Delivers up to CG-130/131 Pressure
4.5 gpm @ 150 psi. Applicator con-
trolled spray gun allows easy control Chemical Pumps
of material output. Drive power—air,
electric. Mobile, high pressure, positive displacement piston drive pumps
deliver up to 4 gpm @ 500 psi. Use for waterproofing, soil
stabilization, shaft grouting. Drive power—air.
ChemGfout
prices of other sizes upon request
67 D & L THOMAS EQUIPMENT CORP.
ILMEG SYSTEM
Dust Collector Systems
The "ILMEG" revolutionary dust collecting system for the rock drilling industry. It offers a new concept for an efficient, dry-type
and compact collecting system. Has a powerful ventury which creates a vacuum for suction of cuttings and dust. Separator
discharges cuttings automatically to filtration chamber. Low air consumption.
This unit is totally automatic, compact, modular construction on pivotable mounting brackets. Designed for use with 2-1/2" to
5-1/2" bore holes. Hood adapts to most surface contours.
The "ILMEG" meets all safety and environmental dust standards. This is the answer to your rock drill dust problems.
• low cost A DUST COLLECTOR FOR USE WITH TWO MACHINES DRILL-
ING INTEGRAL STEELS UP TO 1-1/2" (38 mm)
• low air
TECHNICAL DATA
• no moving parts
3 pcs 900 mm long filters
CLAMP RING
PICKUP POT
TOP GASKET
PRECLEANER
PICK-UP POT
DRILL PIPE
Listed in the table below are the basic specifications of the various models
of Filter/Clone* units currently being used on blasthole drills.
MAX. BLOW-
AIR CAPACITY Pilfer/Clone' AIR FLOW APPROX. NO. SUCTION BLOWER
(SCFM) MODEL (SCFM) HP FILTERS HOSE DIA. WHEEL
H Y D R A U L I C MOTOR -
OPTIONAL EQUIPMENT:
• Constant suction vacuum indicator.
• Pick-up Pot Assembly, tailored for mounting on your
feed.
• Dust Collector Valve, remotely controlled (24 VDC).
• Suction Hose and Clamps.
• Special mounting brackets.
• Purge Air Pressure Regulator. TECHNICAL DATA
What Is Adsorption?
Adsorption is the fixation or the holding of a vapor on a desiccant's
surface without mixing with its molecular structure. Activated
aluminas and carbons, silica gels, and molecular sieves are capable
of adsorbing water vapor. In order to obtain a high degree of ad-
sorption, the surface of desiccant must be well developed. The pres-
ence of pores, fine capillaries in activated alumina, increases the
surface area to several hundred square meters per gram of product.
Because water vapor has the highest affinity for alumina, activated
alumina is the most common type of desiccant used to dry com-
pressed air and gases.
What Is Regeneration?
Regeneration or desorption is the process of stripping or removing
the condensed molecules of water vapor from the desiccant. After
the adsorption cycle, desorption is brought about by reducing the
vapor pressure. Regeneration of desiccant is accomplished by blow-
ing a very dry and/or hot gas over the desiccant bed. The dynamic
capacity of activated alumina to adsorb and regenerate is a function
of the temperature and pressure to which it is subjected.
PIONEER Advantages
1. Energy Efficient
No energy consuming equipment is part of the basic dryer.
2. Low Pressure Drop
Only 1% drop in the operating pressure.
3. Exceptional Reliability
No moving parts to fail in Pioneer's simple design.
4. Minimum Desiccant Consumption
More than half of the moisture is removed in the first three
steps of the drying process, none of which require addi-
tional desiccant. This reduces the desiccant usage, per
pound of water removed, to less than half that of competi-
tive systems.
5. Minimum Maintenance
Inspect your Super Deliquescent Dryer about once a week
to maintain desiccant at or above the sight glass level.
6. No Drain Clogging
The drain flows freely because the condensate from the
dryer is free of large solid particles.
DRAIN
Figure 1
Trays capture solids in the Super Deliquescent Dryer, so
that the condensate, free of solids, flows over the trays thus
preventing drain clogging.
PIONEER SPECIFICATIONS AND The PIONEER Portable Air System comes complete with a
SD750 Super Deliquescent Dryer, air-motor driven air-
DIMENSIONS cooled after cooler, Centri-Flo moisture separator and a float-
type automatic drain. This system requires no electricity.
The cold dry air flows through the air to air heat exchanger PIONEER R - Series Dryers
where it is reheated by the incoming warm air. Re-heating In accordance with NFPA and ACGI standards, dryer, capacities are based on 1OO'F and 10OPSIG Inlet, 10OT Ambient,
increases the volume of air, prevents the sweating of air lines 35T range POP, and maximum pressure drop of 5 PSIG. FOR CONDITIONS OTHER THAN STANDARD PLEASE
and lowers the relative humidity of the air — Thus enabling it REFER TO PAGE 10.
to do more work. The clean dry air is then available for use.
(Heat Exchangers and Refrigeration Systems in an 'ADR' Sys- Rating & General Data (Direct Expansion Design)
tem are about twice the size of that of an 'R' series dryer of
equal capacity).
MODEL
SCFM NOM.
H.P.
DIMENSIONS©
AIR STD. 0
MAX©
WORK APPROX
®@
© AP IN/OUT VOLTAGE
PRESS WT.
r|t
35° PDF 50° PDF PSIG L W H
R10A/W®
R15A/W
10
15
15
18
2.5 1/6 15-1/2 13-1/4 1 0-3/4 3/8" O.D. A 50
4.0 1/6 15-1/2 13-1/4 1 0-3/4 3/8" O.D. 55
R20A/W 20 25 4.0 1/5 20 15 18 1/2" NPT 85
R25A/W 25 30 2.0 1/4 20 15 18 1/2" NPT g 90
R35//W 35 45 3.0 1/4 20 15 18 1/2" NPT c 95
R45A/W 45 55 4.0 1/4 20 15 18 1/2" NPT ^ o 100
R55A/W 55 65 3.0 1/3 23 18 17 3/4" NPT 3^
^CDC3
Co . 120
R75A/W 75 90 4.0 1/2 23 18 17 3/4" NPT LO C 130
(r/v
^ o
R100A/W 100 120 2.5 1/2 32 22 28 1-1/2" NPT 250 PSIG 225
I c
R125A/W 125 150 2.5 3/4 32 22 28 1-1/2" NPT rTT 250
R150A/W 150 180 3.0 3/4 32 22 28 1-1/2" NPT | 270
R200A/W
R250A/W
200
250
240
300
3.2
3.5
1
1-1/2
32
32
22
22
28
28
1-1/2" NPT
2" NPT
~L k
o
c^ I 290
320
I
R300A/W 300 360 4.0 1-1/2 32 22 28 2" NPT o V 350
R400A/W 400 480 2.5 2 43 26 34-1/2 2-1/2" NPT -si-
550
R500A/W 500 600 3.0 3 43 26 34-1/2 2-1/2" NPT "si- 750
"si-
R600A/W 600 720 3.5 3 43 26 34-1/2 2-1/2" NPT 850
R800A/W 800 960 2.5 4 56 35 43-1/2 3" NPT 1150
R1000A/W 1000 1200 3.0 5 56 35 43-1/2 3" NPT 1400
R1200A/W 1200 1440 3.5 6 56 35 43-1/2 3" NPT o 200 PSIG 1600
R1600A/W 1600 1920 2.5 4+4 62-1/2 61 73-1/2 4" FLG. co 2200
R1800A/W 1800 2160 3.0 4+5 62-1/2 61 73-1/2 4" FLG. o
2500
R2000A/W
R2400A/W
R3000A/W
2000
2400
3000
2400
2800
3600
3.5
4.5
3.0
5 +5
6+6
15
62-1/2
62-1/2
103
61
61
70-1/2
73-1/2
73-1/2
43
4" FLG.
4" FLG.
6" FLG.
c
<:0
s
h
^ c
c^
c
I 2800
3100
4000
R3500A/W 3500 4200 4.0 20 113
LO g /\
70-1/2 43 6" FLG. o 4500
R4000A/W 4000 4800 4.5 20 123 u•)
70-1/2 43 6" FLG. u•) 5000
R5000A/W 5000 6000 4.5 25 154 79 45 8" FLG. 6000
R6250A/W 6250 7500 4.5 30 170 79 45 8" FLG. 7500
R7500A/W
R10000A/W
R12500A/W
R15000A/W
7500
10000
12500
15000
9000
12000
15000
18000
TABLE 1
WINCH SPECIFICATIONS
Maximum
Rope Pull Rope Pull Rope Speed Drum Cap. (Ft.)
Lbs. (stall) Lbs. Ft./Min. Rope Dia. (in.)
Model First Turn Half Drum Half Drum Smooth Wind
AW-80 2,000 1,000 40 125'-3/8"
EW-111 7,100 2,200 100 230'-1/2"
JHA-20 5,200 2,400 120 400'-1/2"
JHAL-20 5,200 2,400 120 1020'-1/2"
JHA-40 7,500 4,300 60 400'-1/2"
JHAL-40 7,500 4,300 60 1020'-1/2"
LF-113 6,400 3,600 125 1125'-5/8"
JHA-60-24 11,000 7,000 50 1400'-5/8"
AF-112 12,500 8,100 65 970'-3/4"
JHA-100 21,000 10,200 50 1 690'-3/4"
OS-111 A 26,000 16,000 40 2500'-3/4"
OS-111 B 26,000 16,800 40 940'-3/4"
OS-200 40,000 20,000 50 2300'-1"
Sullivan
Machine'y Company
RAM
Operating Speed 2600 RPM N/A
Compressor:
Rated Delivery 900 cfm (25.5 m3/min) N/A
Operating Pressure Range 70-11 5 psig N/A
(483-793 kPa)
Ambient Operating Temp. -20°- + 125°F N/A
Range (-29° - + 52°C)
Oil Receiver Capacity 30 gal. (114L) N/A
Type Cooling System Oil to Air N/A
Tracks:
extendable boom track drill Grouser Plate Width
Overall Track Length
10" (254 mm)
9'10" (299.7 cm)
10" (254 mm)
9'10" (299.7 cm)
Track Width 95" (24 1.3 cm) 95" (241. 3 cm)
- efficiency with economy Boom & Guide:
Max. Horizontal Boom Swing 40° right/500 left 40° right/500 left
Max. Vertical Boom Movement 50° up/300 down 50° up/300 down
Max. Guide Swing 90° left/400 right 90° left/400 right
For users who have portable air, there's nothing Max. Guide Dump 140° 140°
like the original RAM extendable boom track drill. Boom Extension 51 (152.4 cm) 5'(152.4 cm)
Drill Travel 14'(426.7 cm) 14'(426.7 cm)
It gives you the advantages of over 20 years of Guide Extension 4'(121.9 cm) 4'(121.9 cm)
development, field experience, and improvement. Minimum Toe Hole Angle 12° 12°
It's ideal for line drilling, production work, and General Specs:
I development drilling in mining, quarrying, and Gradeability 30° 30°
III heavy construction. Feed Motor Radial piston Air Radial piston Air
Tram Motor Radial piston Air Radial piston Air
Tramming Speed 2.25 MPH 2.25 MPH
IllIIIIIIJIIIIIIJll:;, The RAM's long, wide, low chassis/track Steel Change 12'(365.7 cm) 12'(365.7 cm)
Steel Single Pass 14'(426.7 cm) 14' (426.7 cm)
|III|||JIII||)|J||le and extra weight give it the stability and Weight 19,500#Dry(8845kg) 14,700#Dry(6667kg)
IIIIIIIIIIIIIIIIIIIIIIIIIl balance needed for tramming and Shipping Width 8' (243.8 cm) 8' (243.8 cm)
IIIIIIIIIIIIIIIIIIIIIIIIIl setting-up even in difficult terrain. Operating Width 8' (243.8 cm) 8' (243.8 cm)
Overall Length (tower down) 25' (772 cm) 22T(673cm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIll;;:, ItsS'-longextendableboom Overall Height (horizontal hole) 20'8" (630 cm) 21'(640 cm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII;:;:;^ makes drilling easier in tough Ground Clearance 12" (304.8 mm) 12" (304.8 mm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII^^ spots. The chassis provides a Optional Equipment:
IIIIIJIJIIJIIIIJIIIIIIIIIIIJIJIIIJIIIIIIIIIIIII^^ drilling platform -and, Dry-Type Dust Collector
Illlllllllllllllllllllllllllllllllllllllllllllllll)^ VCR-360or361 Pre-Cleaner
Compressor Enclosure
|l||||||||||||ation drills, the RAM will put Utility Winch
|||f||||||||J||||es in the hardest rock with Deflector
Backup Alarm
||||||||||||||||jlllp rod u ct i o n an d re I i ab i I i ty.
DRILL ENGINES
(Metric units in parenthesis)
VCR-360 VCR-361
Bore diameter 5 1/4 in. (134mm) 6 1/2 in. (165 mm)
Stroke 3 5/8 in. (92 mm) 3 3/4 in. (95 mm)
Drill steel 1 1/2" (38 mm) or 1 3/4 1 3/4 in. (45 mm)
Striking Bar -Threaded for optional steel systems-
Rotation Type -Independent-
AirtubeOD/ID 5/8 in./1/2 in. 3/4 in 75/8 in.
Air hose (ID), drill 2 in. (51 mm) 2 in. (51 mm)
blow 1 in. (25 mm) 1 in. (25 mm)
rotation 3/4 in. (19 mm) 3/4 in. (19mm)
Hole size range 2 1/2 to 4 in. (64-1 02 mm) 3 to 4 in. (76-1 02 mm)
Air Volume, drill & blow 600cfm(16.8m3/min.) 850 cfm (24 1 m3/min.)
drill only 325cfm(9.1m3/min.) 485cfm(13.7m3/min.)
Air Pressure 100psi(7kg/cm2) 100psi(7kg/cm2)
Blows/min. 2250 bpm 2050 bpm
Net weight 483 Ibs. (219kg) 510 Ibs. (231 kg)
This is
W SCORPION
... proven performance in the new
SCORPION
Sullivan self-contained, pneumatic
...the first Sullivan self-contained air track drill, with
flexibility and features you won't find anywhere else. track drill for tomorrow's workload
Scorpion is based on the proven efficiency, economy
and low maintenance performance of Sullivan's Re-engineered from time-proven Sullivan RAM track drill
pneumatic RAM drills - equal to or better than equal-
capacity hydraulic units, with lower purchase price, Q O O c u . f t . of on-
Uses dependable 5-ft. hydraulic board air delivers
lower operating costs, greater reliability, and easier, less Sullivan VCR-360 and boom extension ample drilling power
frequent, less expensive maintenance. VCR-361 valveless, delivers the reach plus new
continuous rotation you need to drill in maneuverability,
drills different locations flexibility
For the Scorpion, we have re-engineered proven RAM
technology to take full advantage of on-board air.
MUFFLER
ROTATION MOTOR
STRIKING BAR
VCR-360 / VCR-361 Retrofit Kit
COUPLING
STEEL
Your SULLIVAN Distributor will
outfit you with the new
VCR-360/VCR-361 Retrofit Kit.
VCR-361 Drill Operation
The two basic operating functions of Tell him your plans about compressor capacity,
the VCR-361 drill—percussion dust collection, rock production you're shooting for
and rotation—are accomplished on your upcoming job—he'll show you all the de-
independent of each other. tails on the new VCR-360/VCR-361. And where it
BIT can give you more performance than you're get-
ting while cutting your costs.
Percussion. Air entering the drill passes directly Rotation. A separate air inlet admits air to a gear-
to both ends of the piston. The piston reciprocates type air motor. The air motor transmits torque
in the cylinder in a valveless cycle in which the through the rotation gearing to the chuck driver
piston itself operates as a valve, alternately ex- which is splined to receive the striking bar. Rota-
posing and covering ports on the ends of the cylin- tion (rpm) of the drill steel is continuously variable
der. This is a volume expansion controlled cycle by use of the rotation valve on the drill feed.
using only one moving part—the piston.
SPECIFICATIONS ATD3800
PLANETARY
» 360° Continuous swing offers the largest drill pattern available (395 sq. ft) double that
of competitors
* Full body rotation allows for safer > Proven (M 312 Excavator
tramming down steep inclines undercarriage
* increased ability to approach angles »Tram highwalls more safely with
for drill holes upper body turned 90°
Robust.HPR4519 rock drill is field serviceable
Longest single pass capability
SinartDrilP is a hydraulically operated drill control system ttiat allows operators to drill
more effectively by utilizing anti-jam, anti-plug, and anti-plunge features, SmartDrilP
operation iengtiens drill string life and has proven to increase overall production.
TEREX REEDRILL
^ Robust HPR5128 rock drill is field serviceable witti almost half the total parts of the
competitors- making service a breeze
^ Optional 60 or 68 mm steel capability
» W C-10 Tier II Engine 310 hp {231 kW) @ 1800 rpm
^ Heavy-duty, long-life mainframe weidment is mounted on excavator undercarriage lor
advanced stability in rough terrain
I TEREX Reedriil dust collector is powerful and efficient allowing virtually no dust
^ Simple hydrayiic system is easily maintained
I Reliable linear rod changer offers trouble free operation
I Two man swing cab for optimal visibility and comfort
Quarry * Construction * Mining
Type of pump
m
piston/gear piston/gear
_™™™»™
Reservoir capacity
51 mm 5x3,658+1 / 4X6,096+1
TEREX I REEDRILL
^ Robust H PR451 9 rock drill is field serviceable with fewer total parts than competitors
- making service a breeze
^ Optional 51 mm steel capability
^ CAT C-9 Tier II Engine 275 tip (205 Wf) @ 1 BOO rpm
> Hea¥y-du% long-life mainframe weldHient is mounted on excavator undercarriage
for advanced stabilif in roygh terrain
I TEREX Reedrill dust coliector is powerful and efficient showing virtually no dust
^ Simple hydraulic system is easily maintained
> Reliable linear rod changer offers trouble fee operation
Model
•III
Gardner Denver
m
Gardner Denver
Free air delivery maximum 7 m3/min
Working pressure bar
TEREX I REEDRILL
Specifications Specifications
U.S. U.S.
Weight 480 Ibs. Weight 880 Ibs. w/o slide
Total Energy 750,000 ft. Ibs./minute Total Energy 1.2 Million ft. Ibs./minute
Impact Frequency 2500-4000 BPM Impact Frequency 2520@3150PSI
Rotation Speed 0-300 rpm Rotation Speed 0-150 RPM
Rotation Torque 500 ft.-lbs. (MAX) Rotation Torque 1,000ft. Ibs.
Operating Pressure 3100psi(MAX) Operating Pressure 3150PSI(Max)
Recommended Drill Steel 1-1/2"rd.to1-3/4"rd. Recommended Drill Steel 2" Rd. - T51
with G38 or G45 Threads
prices of other sizes upon request
87 D & L THOMAS EQUIPMENT CORP.
4f""!*i*K-GARDNER-DENVER HYDRA-TRACS
SCH5000C Standard Features
Hydraulic powered, sound supressed, pressur-
ized operations swing cab
Twelve foot (121) Model HUFH12 steel chan-
nel chain
Linear rod changer for five (5), 12' drill rods
Steel changing system handles steel for 72'
hole
Eight foot (81) telescopic swing boom with three
foot (31) extension for maximum vertical pat-
tern coverage
Alternate
•111
HOLE DIAMETER
THE SK-25 SERIES THE SK-35 SERIES 5"-7-7/8"..................................................... (127-200 mm)
The rugged SK-25 is a crawler The rugged SK-35 is a carrier mounted
mounted blasthole rig specifically de- blasthole rig specifically designed to POWER UNIT
signed to accommodate either down accommodate either down the hole Cummins NTA-855P-400
Rated Horsepower .............................. 400 h.p. (298 kW)
the hole hammer drilling or rotary drill- hammer drilling or rotary drilling. Ham- Rated Speed...................................................... 2100 rpm
ing. Hammer drilling hole sizes range mer drilling hole sizes range from 5 in.
from 5 in. to 7 in. (12.70 cm to 17.78 to 9 in. (12.70 cm to 22.86 cm) while COMPRESSOR
cm) while rotary drilling hole sizes rotary drilling hole sizes range from 6- 750CFM@125psi
21 m3/min at 8.5 bar.
range from 5 in. to 6-3/4 in. (12.70 cm 3/4 in. to 9 in. (17.20 cm to 22.86 cm).
to 17.2cm). The SK-35 is ideal for drilling overbur- ROTATION SYSTEM
The SK-25 is ideal for drilling over-bur- den, and mining coal, base metals or Speed ........................................................... 0 to 140 rpm
den and mining coal or in the quarry precious metals and in the quarry mar- Torque............................................................ 7050 ft.-lbs.
industry where a rugged machine is re- kets where travel over longer distances LEVELING JACKS
quired for larger hole sizes. are required. Stroke each .............................................. 48" (1219 mm)
Pad Diameter............................................... 24"(610 mm)
Qty. - 4
FEED SYSTEM
Down Pressure ............................40,000 Ibs. (18,182 kg)
Hoist Capacity .............................40,000 Ibs. (18,182 kg)
Feed Rate .................................... 125ft./min. (38m/min.)
Hoist Rate .................................... 125 ft./min. (38m/min.)
Stroke ...........................................................28' 8" (8.7 ?)
Most units, ready to work - others are parts machines which have
many obsolete or hard to find parts.
Requires only 125 CFM compressor. Mounts di- Manually clamp onto backhoe buckets with teeth
rectly on dipper or, with optional Grip, can be in about 1 minute. Fits buckets from 12" to 36".
mounted on bucket in about 2 minutes. 4 and 6 ft. lengths.
FOUNDATION DRILL
PCF4 Hydraulic Chain Feed
w/up to 3500 Ibs. of push & pull
Uses up to 5' long drill pipe
RDS528H Rotary Drive
1550 Ibs.-ft. @ 2000 psi
0-600 RPM capacity
20HP Electric Motor
Runs off 220/440 volt
Great for operating inside and outside of homes, buildings and mines.
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 94
HBM ROCK
DRILLS
BACKHOE USA MANUFACTURED
MOUNTS DISTRIBUTION WORLDWIDE
Mounts on:
Applications
Cured Concrete
C-02P - Hard rock with non-abrasive sand.
C-06P - Hard aggregate such as river gravel or flint.
C-08P - Granite or other similar medium hard aggre-
gate.
C-10P - Limestone or slag aggregate.
Cured Concrete
with Asphalt Overlay
C-20P - Hard aggregate or greater % of concrete
than asphalt.
C-40P - Soft to medium aggregate or greater % as-
phalt than concrete. P-60 Walk-Behind Saw
Green Concrete • Use indoors or out - no engine exhaust
C-20P - Hard aggregate with non-abrasive sand. pollutants
C-40P - Hard river gravel aggregate. General pur- • Lightweight - only 50 pounds plus blade
pose blade for low horsepower saws. • Cuts dry - specifically designed for dry blades
C-60P - Hard aggregate with sharp abrasive sand. • Direct Drive - for maximum power, no belts, pulleys or chains to drain horsepower or break
C-68P - Medium to hard aggregate with sharp sand. • 5250 RPM working speed - the best RPM for dry cutting blades - increases blade life and
Long life general purpose blade. speed of cut
C-70P - Limestone or other soft abrasive aggre- • Air Power - 90 CFM @ 100 PSI
gates. • Designed for use with 12" or 14" dry cutting blades
• Dead man type hand throttle - safe and reliable
Asphalt • Adjustable cutting depth - up to 4" with 14" blade
C-40P - Hard non-abrasive aggregate such as gravel • Dust suppressor - an atomizer sprays water, keeping dust to a minimum
or flint. • Automatic oiler in handle
C-60P - Hard aggregate such as pea gravel. • Detachable handle - easy to transport - saw fits in car trunk
C-68P - Medium to hard aggregate with natural sand. • Arbor: standard 1"
General purpose blade. • Air inlet size 1/2" NPT female
C-70P - Soft aggregate such as limestone with abra- • Air hose: 3/4"
sive sand. • Minimal maintenance schedule - economical operation and long life
Specifications
Model No.: MK-2016K MK-2075E3 MK-2016H
Specifications Engine/Motor: Kohler Command Electric Honda V-Twin
Model No.: MK-3500-18 MK-6500-18 w/ electronic start 208-230/460V GX620 with electric
Engine/Motor: Wisconsin Wisconsin and oil alert 3 phase start and oil alert
W4-1770 W4-1770 Horsepower: 20 h.p. 7-1/2 h.p. 20 h.p.
Horsepower: 35 h.p. 65 h.p. Fuel Capacity: 2 gallons n/a 2 gallons
Fuel Capacity: 6 gallons 9 gallons Guard: 16' 16' 16'
Blade Capacity: 18" 18" Weight: 385 Ibs. 365 Ibs. 385 Ibs. J
Depth of Cut: 6-5/8" w/1 8" blade 6-5/8" w/1 8" blade Part No.: 153720 151787 153966 J|
Travel Speed: 2007min. forward 2007min. forward
1807min. reverse 180'/min. reverse
Weight: 950 Ibs. 1320 Ibs. Transmission: Heavy-duty hydro static variable speed drive
Size: 43"L x 30"W x 42"H 50"Lx36"Wx56"H Blade Shaft: 1-1/4" diameter with two self-aligning bearings
Part No.: 152636 152639 Belts: Three high performance cog belts
Depth Feed: Positive ball bearings screw feed with hand crank
Blade Capacity: 12" thru 16"
Optional Items: Factory Installed Depth of Cut: 6" with 16" blade
Water Pump: P/N: 152637 P/N: 152640 Travel Speed: Forward 0-80'/min.
Lifting Bale: P/N: 152648 Lifting Bale: Included
26" Blade Guard: P/N: 152638 P/N: 152638
Dry Cutting
30" Blade Guard: P/N: 152642 Optional Items: Factory Installed Blades
36" Blade Guard P/N: 152643 20" Blade Guard: P/N:154060
Every MK Diamond
dry cutting blade is
manufactured with
MK-9000 SERIES the latest technology
available. They are
Specifications engineered to have a
Model No.: MK-9816H MK-9136H MK-9816W MK-9116W superior cutting edge
Engine: Honda Honda Wisconsin/Robin Wisconsin/Robin over other blades plus
Horsepower: 8 h.p. 13 h.p. 7-1/2 h.p. 11 h.p. a longer life.
Weight: 207 Ibs. 238 Ibs. 206 Ibs. 228 Ibs.
Part No.: 150825 150826 150654 150656 On concrete or as-
phalt, your saw will
Specifications operate at peak effi-
Model No.: MK-9916VG MK-9146VG MK-9516E1 MK-9516E3 ciency and a consis-
Engine: B & S Vanguard B & S Vanguard Electric Electric tent cutting speed.
Single Phase, Three Phase, A/C
A/C 60Hz, 230V 60Hz, 240/460V
Horsepower: 9 h.p. 14 h.p. 5 h.p. 5 h.p.
Weight: 211 Ibs. 243 Ibs. 150 Ibs. 150 Ibs.
Part No.: 152575 152572 150936 150934
Maximum Performance
MK-7501 Cured Concrete, MK-465D Standard-Asphalt/Green
Hard aggregate, non-abrasive sand Diameter Width Part No.
12" (300mm) .125 150617
MK-7502 Cured Concrete, 14" (350mm) .125 150618
16" (400mm) .125 154064
Medium/hard aggregate
HydraCutterC150 TM
Product Code: 00808
Includes:
• Hydraulic Head with Auto Shutoff
of water and cutting operation
• Chain with 38 Diamond Segments
(Choice of: SL-10, SL-20, SL-30)
(SL-20 chain will be shipped unless otherwise specified)
Bar with 15 in. cutting length
Nose Sprocket Kit
Drive Sprocket with 18-tooth Spur
Trantorque® Shaft Adaptor
Water Pressure Gauge
Wall Walker Attachment
HydraCarts
Product Code Description Weight
00489 SawCart-for light duty straight line cutting 60 Ibs.
(Accommodates 14 in. saw only)
If your drilling or sawing requirements are unusual let us know and we will recommend and design
a system for you.
sharpen Kenroc button bits about 1/4 spherical, and slightly smaller than
as often as bladed bits. That is, a but- when new.
ton bit should run about 4 times longer
than a bladed bit before sharpening is Face buttons and chipways
required. The need for button bit sharp- While face buttons wear slower than
ening is easily detected by checking the gauge buttons, they should also be
size of the flats on the gauge buttons. sharpened at regular intervals. Flats
Buttons that are cutting gauge will usu- on the face buttons wear at an angle,
ally show the most wear and are instru- depending upon button location.
sharpen to spherical shape
mental in determining the life of the bit. Sharpen them the same as you would
Thus, you should first check the size of gauge buttons, and return them to their
the flats developing on the gauge but- original spherical shape.
tons. Use the rule-of-thumb guide Chipways are also important to bit
shown in diagram. Drilling with a but- performance. As a matter of practice,
ton bit beyond these wear limits will lead include the cleaning of chipways in your
to decreased penetration rates and bit regular bit sharpening program. Grind
failure. Other factors you should con- away sharp edges, and enlarge the
sider are: abrasiveness of the rock, passages if they have become worn.
down pressure, and rotation speed, Quick chip removal improves bit per-
drilling experience will tell you that the formance.
harder you work a bit, the more often Proper sharpening will help you get
you should check for button wear. the most out of Kenroc button bits, and
After a while, you will be able to de- will go a long way towards preventing in soft rock,
velop a regular sharpening schedule premature bit failure. If a button should flats are 1/4"
based on the amount of footage drilled be broken off, the bit is still usable.
It's time in medium rock,
and the types of rock you are working Grind the button flush with the body and
to sharpen
in. Regular inspection and regular put the bit back into service. flats are 3/16"
when:
sharpening add up to maximum button Another thing to check is thermal
in hard rock,
bit life. cracking of the carbide. In certain rock
flats are 1/8"
conditions, a "snakeskin" - like crack-
"^J:±U^ X^ J^ ^uays
Retrac Guide
RE11
^ __^ £**\ Thread Diameter Part
K l\m In. Number
m WA m ^S -i .-1/4 rope thread 1 -3/4 44 175BB125RET 175BB125RGUIDE
^ 2 51 200BB125RET 200BB125RGUIDE
ROK • |m W • ^%
MMM m k^
2 14
"
2 _ 1/2
57
63
225BB125RET
250BB125RET
225BB125RGUIDE
250BB125RGUIDE
3 76 300BB125RET 300BB125RGUIDE
Flat Face and Drop C7*ntflrKlC*'i«"'g««
Available with \^ 225BB150RET 225BB150RGUIDE
__ ^^^ A 1-1/2 rope thread 2-1/4
2 1/2
Conical or
Ballistic Carbide ^"" • TnTY 3~
250BB150RET 250BB150RGUIDE
•I
13 127 500BB1700RET 500BB1700GUIDE
45 thread 3 76 300BB45
3-1/2 89 350BB45
4 102 400BB45
4-1/2 114 450BB45
5 127 500BB45
1 51 thread 3-1/2
4
89
102
350BB45
400BB45
O C 4-1/2
5
114
127
450BB45
500BB45
Knock-off Blocks
Knock-off Blocks Part Number
7/8" Hex 88HRB
1" Hex 100HRB
7/8" Hex Reaming 88HR
Hex Reaming 100HR
12°
7/8 1-1/4 32 1-1/4BT1 2-7/8
7/8 1-3/8 35 1-3/8BT12-78
7/8 1-1/2 38 1-1/2BT1 2-7/8
7/8 1-5/8 41 1-5/8BT1 2-7/8
7/8 1-3/4 44 1-3/4BT1 2-7/8
1 1-3/8 35 1-3/8BT12-1
1 1-1/2 38 1-1/2BT12-1
1 1-5/8 41 1-5/8BT12-1
1 1-3/4 44 1-3/4BT12-1
Failure Type 1 - is characterized by a fatigue rose originating from the surface. It can occur on both
round and hex steels anywhere along the length of the rod.
Failure Type 2 - is characterized by a fatigue rose originating in the bore, and can occur anywhere
along the length of the rod.
Failure Type 3 - is typically a sudden failure, no fatigue rose being present, through the radius where
the threads meet the rod section (either round or hex.).
Failure Type 4 -
(a) - occurs where the coupling ends and is typically a sudden failure.
(b) - occurs about 1/3 the way into the threads and is associated with worn threads and
surface galling.
(c) - is a chip broken off the end of the drill steel.
04ST150R
1-1/2" Rope Thread Single 8 2.44 08ST150R
10 3.05 10ST150R
12 3.66 12ST150R
14 4.27 14ST150R
Reducing Steel
The following sizes of reducing steel are in stock. If you do not see the size you
are looking for, let us know your requirements and we will try to get it for you.
08LT125ST150
10LT100ST125
10LT125ST150
10ST125ST38
12ST1400ST1600
14ST1400ST1600
16ST125ST38
D 2 .61 02HEX100DT
D 4 1.2 04HEX100DT
D 6 1.8 06HEX100DT
M
7/8" x 4-1 /4 shank 1 i f x 4-1/4" shank
Length Under Collar Part Price Length Under Collar Part Price
12° Ft. M. Number Each Ft. M. Number Each
2 .6096 02HEX88T12 2 .6096 02HEX100T12
2-1/2 .7620 0250HEX88T12 2-1/2 .7620 0250HEX100T12
3 .9144 03HEX88T12 3 .9144 03HEX100T12
3-1/2 1.067 0350HEX88T12 3-1/2 1.067 0350HEX100T12
4 1.219 04HEX88T12 4 1.219 04HEX100T12
4-1/2 1.372 0450HEX88T12 4-1/2 1.372 0450HEX100T12
5 1.524 05HEX88T12 5 1.524 05HEX100T12
5-1/2 1.676 0550HEX88T12 5-1/2 1.676 0550HEX100T12
6 1.829 06HEX88T12 6 1.829 06HEX100T12
6-1/2 1.981 0650HEX88T12 6-1/2 1.981 0650HEX100T12
7 2.134 07HEX88T12 7 2.134 07HEX100T12
7-1/2 2.286 0750HEX88T12 7-1/2 2.286 0750HEX100T12
8 2.438 08HEX88T12 8 2.438 08HEX100T12
8-1/2 2.591 0850HEX88T12 8-1/2 2.591 0850HEX100T12
9 2.743 09HEX88T12 9 2.743 09HEX100T12
9-1/2 2.896 0950HEX88T12 9-1/2 2.896 0950HEX100T12
10 3.048 10HEX88T12 10 3.048 10HEX100T12
10-1/2 3.200 1050HEX88T12 10-1/2 3.200 1050HEX100T12
11 3.353 11HEX88T12 11 3.353 11HEX100T12
11-1/2 3.505 1150HEX88T12 11-1/2 3.505 1150HEX100T12
12 3.658 12HEX88T12 12 3.658 12HEX100T12
7/8" x 4-1/4"
(22mm x 108mm)
LENGTH BIT SIZE Weight Part No.
4CHES mm INCHES mm Weight Kilogra
1
7" 800 1 .57 40 6.5 2.S 0250HEX88INTS40
'3" 1600 1 .54 39 11.9 5.4 05HEX88INTS39
Series '10" 2400 1 .50 38 17.6 7.S 08HEX88INTS38
12 0' 6" 3200 1 .46 37 22.5 10. 11HEX88INTS37
3'1" 4000 1 .42 36 28.0 12. 13HEX88INTS36
5' 9" 4800 1 .38 35 33.5 15. 16HEX88INTS35
1"x 4-1/4'i"
(25mm x 108mm)
3
A" x 41/4" HEX SHANKS
These drills are used with the BBD 12 Drill.
DRILLING O. A. LENGTH ITEM
BIT SIZE SHANK SIZE
DEPTH LENGTH U. C. NO.
3
/4" 3/4" x 41/4" 5" 13" 1930
7
/8" 3/4" x 41/4" 5" 13" 1931
11/8" 3/4" x 41/4" 15" 10" 1932
1%" 3/4" x 41/4" 24" 19" 1933
1846 7
/8" 81/4" 13"
1847 7
/8" 12" 153/4"
These stems are used with tapered socket bits. They come in two sizes, large and small.
The small takes bit sizes from 1/2" to 3A" . The large takes bit sizes from 27/32" to 13/8".
Item No. Stem Size Bit Sizes O.A. Length Drill Depth
1
3158 %" /2" to %" 12" 8"
3159 %" 27
/32" tO 1 3 /8" 12" 8"
WS WEDGES
WS WEDGES
These wedges have a round shank so they may be driven by a jack-
hammer or paving breaker. They are used with the same type of shim
as listed above. They may have either a 1" or 1 Ys" round shank. Sizes
available run from 12" to 72". More detail and prices gladly sent on
request.
BULL WEDGES
BULL WEDGE Used by paving cutters in making paving blocks. They are made from
alloy steel and properly hardened.
Failure Type 3 is usually associated with the fact that the coupling cannot be removed from the drill rod,
and may occur as a longitudinal crack as shown.
Reducer Couplings
Thread Part Number Price
H-D HXDCPL
1-1/4R-H 125RXHCPL
1-1/4R-1R 125X100RCPL
1-1/4R-1600 125X1600CPL
1-1/2R-1-1/4R 150X125RCPL
101/2R-1700 150RX1700CPL
38-1-1/4R 38X125RCPL
1200-H 1200XHCPL
1 400-1 -1/4R 1 400X1 25RCPL
1400-1600 1 400X1 600CPL
1600-1700 1 600X1 700CPL
1-1/2R-2R 150RX200RCPL
38-1-1/2R 38X150RCPL
38-45 38X45CPL
45-1700 45X1700CPL
45-51 45X51 CPL
Bit Adapters
34,36
BBC54 32 ^^H HOLMAN H40 32
BBE56U2 34, 35, 36 160 2 H50 32
BBE57 34, 35, 36 S115R 7 H60 32
COP125 33 SL16A___________ ____ 1 H70 61
COP126 41 ^^H INGERSOL-RAND ^^H LC50 1
COP130 33 45 2 TA35 __ 1
COP131 33 475 2 ^H SCHRAM
COP150 37 D40 1 176R 2
•
BOHLER ^^H DC35 1
HM750 7 EVL130 7 ^^H TAMPELLA
HM751 7 F16 7 S125 1
HM753 43 LM500 67 L750 ___ 7
^^ CHICAGO PNEUMATIC ^^^ URD350 1 ^HV TAMROCK
400D 1 URD550A 7 HL1000 00
DO
^^
f~~
62 mm) mm)
——1——————————
t——i
1 *—————————
1 / 4 " (31.75 mm)
-f I
(20.64 mm)
_ 33 „_ y ,L
(96.84 6 mm)( 19 - 05
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - 79, 93, 99 LUG 5/16" 1R 79T1002S5
Ingersol Rand - DC35, D40, URD350, 505 3/8" 1-1/4R 79T125S6
Atlas Copco - BBC41 , 43, 44, 45, 1 00 7/1 6" 1-1/2R 79T1502S7
Tarn rock- S125 7/1 6" 38 79T382S7
Joy - TM400 5/1 6" 1200 79T12002S5
Holman -SL16A 3/8" 1400 79T14002S6
LeRoi-D14DR, D25DR 7/1 6" 1600 79T16002S7
CP-400D, 60N
Tampella- S125
Montabert - TA35, LC50
V/i" *
1!/2" (38.10 mm)
(38.10 mm)
1__
Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver -DH1 23, DH99, 123, CH123 LUG 7/1 6" 1-1/4R DH123T1252L7
Ingersoll Rand - 45, D475, URD475 9/1 6" 1-1/2R DH123T1502L9
CP-450, 400DH, 400DR 9/1 6" 38 DH123T382L9
Holman -SL1 60 7/1 6" 1400 DH123T14002L7
Jaeger - 450AL 9/1 6" 1600 DH123T16002L9
Schramm - 176R 9/1 6" 1700 DH123T17002L9
Furukawa-M110, 795D
———— — — 1 3 - 1 / 2 " ( 3 4 3 m m )
2-5 64
(70 6 mr
1-31/64" (37.7 mm) 1-17/64" (32.1 mm)
t_______
Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver - 99 LUG 3/8" 1-1/4R 99T1252L6
7/1 6" 1-1/2R 99T1502L7
7/1 6" 38 99T382L7
3/8" 1400 99T14002L6
7/1 6" 1600 99T16002L7
4
.H 2-1/2" __ ___ 6" ,___ 1"
(63.5mm) (152.4mm) ~H P (25.4mm)
1 ^~^\ /——K
Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver - PR1 43 LUG 1" 2R PR143T20002S16
1" 1800 PR143T18002S16
1" 2000 PR143T20002S16
1" 2K17 PR143T2K172S16
5
l
"I "**™** **Mm** I mM
^ I
1—————— i. , ...... , ,..,... .......................... ........... ^iMWiimii%
.,,,^|,,i
.... . .. ......... :g^;g:;^^|ppg:
; ; ! jSlSliiSJliiiililgiliiliiJli^^^
lUl
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1 23 4 Spline 9/16" 1-1/4R PR123T1254S9S
Tunning Style 9/16" 1-1/2R PR123T1504S9S
9/16" 38 PR123T384S9S
9/16" 1400 PR12314004S9S
PR123T16004S9S
PR123T17004S9S
i
i y^r^ ~^
\ i f~
L ^
^—r^^——---— >n
(5^* G^rnrn) I ( ( ( / ) ) ) 1-2/4" (44.5mm) 1 -3/4" (44. 5 mm)
X^"^/ \ I __J^^^_^^-^^^-JUl
| ^__^J V——_____________ /
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1 33 4 Spline 5/8" 1-1/2R PR133T1504S10
5/8" 1-3/4R PR133T1754S10
5/8" 38 PR133T384S10
5/8" 45 PR133T454S10
5/8" 1600 PR133T16004S10
5/8" 1700 PR133T17004S10
5/8" 1800 PR133T18004S10
i
1 3 /4"
f———r 1 3 /4"
•^_—^-s_^-v^-^»x~^^-«^—>_
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR123, PR55 4 Spline 9/1 6" 1-1/4R PR123T1254S9
Ingersoll Rand - URD475A, URD550, F16 9/16" 1-1/2R PR123T1504S9
VL120, EVL130, VL140 9/1 6" 1-3/4R PR123T1754S9
Holman - S115R 9/16" 38 PR123T384S9
Demag - RD500 9/1 6" 45 PR123T454S9
Worthington - WD48PR 9/16" 1400 PR123T14004S9
Bohler-HM750, HM751 9/1 6" 1600 PR123T16004S9
CP-451 9/16" 1700 PR123T17004S9
LeRoi-455R, LHD155
Jaeger - 450AS
Worthington - WD49 Tamrock - L600, L750
Sullair-750, 751 Tokyo Ryuki-YD135
Toyo- PR220, PR120 Mitsubishi - TR300, TR400
Tampella - L750 Furukawa-M120, HD120
1 P'*'1"' p3-13«8m"T,«&
5
n
J "" "~S /—————————————————————— i
/f ^S^\ i ^t————————————————————————————^ ^
1-1/4" — 1-9/16"
II
, 5 5 6 mm, f f (Q) J 1 1 -1 /2" (38.1 mmi (31.8 — 39.7 mm)
1
I ^N^ ^// \
I V _/ -H———— -—————^ 11 fl
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR123, PR55 4 Spline 9/16" 1-1/4R PR123T125D4S9
-Differential Style- 9/16" 1-1 /2R PR123T150D4S9
1-1/2" Shank Diameter 9/16" 38 PR123T38D4S9
9/1 6" 45 PR123T45D4S9
9/16" 1600 PR123T1600D4S9
9/16" 1700 PR123T1700D4S9
e
——————————————
h^f- 13 i /2 » (342 90 mm) —————————— ^
i ^ i
I ^ 4 ^—p-^^^^^^^^^-^
f 1 \———
r/2"
(55.56 mm) (44.45 mm)
| f ^^^^^^^
w
-»!»/ U- L_ 13/ " 11/ ^ .f
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR55, PR123 4 Spline 9/16" 1-1/4" PR55T1254S9
9/16" 1-1 /2"R PR55T1504S9
9/1 6" 38 PR55T384S9
9/16" 45 PR55T454S9
9/16" 1600 PR55T16004S9
9/16" 1700 PR55T17004S9
—— 30"
(762 Omrr
" 1-51/64"
j i (45.6mm)
3-13/16"-^ 2-13/32"
23/32" (96 8mm) 61. Imrni
(18.2mrr
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR80 4 Spline 3/4" 2R PR80T2004S12
3/4" 1800 PR80T18004S12
3/4" 2000 PR80T20004S12
3/4" 2K17 PR80T2K174S12
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR80 6 Spline 3/4" 2"C-17 PR80T2K176S12
3/4" Series 1800 PR80T18006S12
3/4" Series 2000 PR80T20006S12
rf —•——i —————
O 4 i , W///J
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1000 EXT 1-1/2R PR1000T1504SE
External Flushing 4 Spline EXT 38 PR1000T384SE
13 ±^
(635.0mm)
'"7^ : .f J= T
(44. 5mm) "> (44.5 mm )
/w/'/i
39/64"
(15.5mm)
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR66 6 Spline 5/8" 1-1/2R PR66T1506S10
5/8" 38 PR66T386S10
5/8" 45 PR66T456S10
5/8" 1600 PR66T16006S10
5/8" 1700 PR66T17006S10
i i—— i ^— ^ J^/J/j/JL//Jl
S
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR66 6 Spline 5/8" 1-1/2R PR66T1506S10T
Tuning Style 5/8" 38 PR66T386S10T
5/8" 45 PR66T456S10T
5/8" 1700 PR66T17006S10T
15 £
L^ .
————————— \TJ
29" (744mm)
Tube Part
Drill Type Style Size Thread Number
Gardner Denver- HPR1H 12 Spline 5/8" 1-1/2R HPR1 HT15012S10
Central Flushing 5/8" 38 HPR1HT3812S10
5/8" 45 HPR1HT4512S10
16 f ^^
^U
29" (744mm)
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR1 H 12 Spline EXT 1-1/2R HPR1 HT15012SE
External Flushing EXT 38 HPR1HT3812SE
EXT 45 HPR1HT4512SE
, _ 18
24 3 8 ^-«
(619 1mm)
\/ / j xv y j i f ———TTTTTTTTTn
(476l,(^j|)
!///////
V$ I 9 »9 >
\.————liLLLLiJIJti
\ /'/'/'/'/'/'/M
-^ 9 13/64"
(233.8mm) 58' 38 1mm i
:i5.9mm(
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR1 1 4 Spline EXT 1-1/4R HPR1T12514FE
External Flushing EXT 1-1/2R HPR1T15014FE
EXT 38 HPR1T3814FE
EXT 45 HPR1T4514FE
rno. *___ ^ II 19
^ ^ |U=^^3 D 2" (51mmj ^ ////////// I
uj fr
L ——————————————————————————————^|
3 5" (914mm)
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR2 14 Spline EXT T45 HPR2T4514SE
External Flushing EXT T51 HPR2T514SE
^ «__ =ak ^ -
20
w ^ £•— ' t ' T?r '|-
\ D 2" (51mm)
T---T ;-•---
. 7 / / / / / / / / fl
7-i///////J
3^
L I
36" (91 4mm)
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR2 1 4 Spline 3/4" T45 HPR2T4514S12
Central Flushing 3/4" T51 HPR2T5114S12
l
L™jsdU^ — ^p.,?. ••- - -•» •*ws««^.. • • • •
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - AR93 3 Fluted 5/16" 1-1/4R AR93T1253F5
5/16" 1-1 /2R AR93T1503F5
5/16" 38 AR93T383F5
5/16" 1400 AR93T14003F5
5/16" 1600 AR93T16003F5
22
fcfc
A i -i>.l
* i)
16" _ __ 3-13/16" , 1-3,8" :
mm) ( S 6 . 8 mm) ~~j ( 3 4 . 9 mm)
I_____ ! i
I . . ! ^————————
1-47/64" (44.1 mm) 1 -55/64" (47.2 mm) | ]
I /- , • \ __J_1________JJ
\=V
Tube Part
Drill Type Style Size Thread Number
Joy - TM450DR LONG 9/16" 1-1/2R TM450DR1502S9
9/16" 38 TM450DR382S9
9/16" 1600 TM450DR16002S9
9/16" 1700 TM450DR17002S9
23 ~| p- 16"
3mm)
3-13/16"
(96.8mm) ~~^1
27/32"
^~(21. 4 mm)
t—————\
I !1 ^———i-——*^~^~—~~_^—-^—^_—-j^—.
—r Bl
.k ((O^) 1-25/64" (35.3mm)
|
1 -1/2" (38.1
|
mm)
Tube Part
Drill Type Style Size Thread Number
Joy - Beaver 4 Spline 7/16" 1-1/4R BT1254S7
7/16" 1-1 /2R BT1504S7
7/1 6" 38 BT384S7
7/16" 1400 BT14004S7
7/16" 1600 BT16004S7
Tube Part
Drill Type Style Size Thread Number
Joy - 500RR 4 Spline 7/8" 1-1/2R 500RRT1504S14
7/8" 1-3/4R 500RRT1754S14
7/8" 38 500RRT384S14
7/8" 45 500RRT454S14
7/8" 1600 500RRT16004S14
7/8" 1700 500RRT17004S14
—— 1 " ( 2 5 . 4
j f X
I
!•'• -
Tube Part
Drill Type Style Size Thread Number
Joy - 500RRMS2 4 Spline 7/8" 1-1/2R 500RMS21504S14
7/8" 38 500RMS2384S14
7/8" 45 500RMS2454S14
7/8" 1600 500RMS216004S14
7/8" 1700 500RMS217004S14
r
1 " ( 2 5 . 4 mm) • — — 3 - 1 3 / 1 6 " ( 9 6 . 8 m m )
————14" — 16" ( 3 5 6 — 4 0 6 m m ) -
r==
V,
'
t
2-15/64'f
• I
' 2-19/64"
(56.8 mm) (58.3 mm)
Tube Part
Drill Type Style Size Thread Number
Joy - 600RR 4 Spline 1" 2R 600RRT2004S16
1" 1800 600RRT18004S16
1" 2000 600RRT20004S16
1" 2K17 600RRT2K174S16
28
1 h"" 5mm, —— 3-3/4" (95.3mm)--1 ^-'^ I——
5°^ •-,
1____ £
}——————L
J
!
1-1/4" (31. 8 mm)
t . _ I-
Tube Part
Drill Type Style Size Thread Number
Joy- VCR-150 6 Spline 7/1 6" 1-1 /4 Rope VCR1 50T1 256S7
VCR-350 7/1 6" 1-1 12 Rope VCR1 50T1 506S7
7/16" T-38 VCR150T386S7
7/16" 1400 VCR150T16006S7
7/16" 1600 VCR150T17006S7
r- —————F=^—.—r-—————-——.
1^4" ' iJ W
U (Q) P(60.32 mm
) (44.45mm) r*——————— -j (38.10mm)
t r———*i~^—'—
/ 3 2 " d O 32 mm
__^^_21/4"-^
12
-J L
) ^__ 4"/6"
(119.06mm) (57.15mm)
Tube Part
Drill Type Style Size Thread Number
5/8" 1-1/4R VCR260T1258S10
Joy - VCR 260, 360, 460 8 Spline 5/8" 1-1/2R VCR260T1508S10
Joy VCR261 - 5/8" 1-3/4R VCR260T1758S10
Same w/3/4" Tube Size 5/8" 38 VCR260T388S10
5/8" 45 VCR260T458S10
5/8" 1 600 VCR260T16008S10
<XaX>
^N——•—
——————— t ——————————-———.
d (O) p 2-5/16
* r*
2" 1-3/4"
L_ —————————{ ————^
JL
7/16"
-—— 4-3/4" ——-~ -*-2-1 /4'-1*-
Tube Part
Drill Type Style Size Thread Number
Joy - VCR361 8 Spline 3/4" 38 VCR361T388S12
3/4" 45 VCR361T458S12
19-1/2" (495mm)
2" (50.8mm)
Tube Part
Drill Type Style Size Thread Number
Joy VCR 280 10 Spline 1-1/4" 2" Rope VCR280T20010S20
1-1/4" 2"-17 VCR2802K1710S20
1-1/4" 1800 VCR280180010S20
1-1/4" 2000 VCR280200010S20
,,,i.ii:,l
,
' ~~
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBC51 , 52, 54, 1 20 2 LUG 7/16" 1-1/4R BC51T1252S7
Montabert - H40, H50, H60 7/16" 1-1 /2R BC51T1502S7
7/1 6" 38 BC51T382S7
7/16" 1400 BC51T14002S7
7/16" 1600 BC51T16002S7
.... MM
m.® f»m
, ^^
!!!!!!!!!!!!!!l!!lll!!!!!lllli!!llll
E::J
Tube Part
Drill Type Style Size Thread Number
Atlas Copco- 125, 130, 131 3 Fluted 9/16" 1-1/4R COP125T1253F9
9/16" 1-1/2R COP125T1503F9
9/1 6" 38 COP125T383F9
9/16" 1400 COP125T14003F9
9/1 6" 1600 COP125T16003F9
34 _ ..... —————————
l
2
T" /x^Vs
16 4 3 m m !
J
1
I
Cv ^O
\_ j
ff J f
i
1-3/4" ( 4 4 . b m m )
\
f
J
\^
—^
L
y
i
M-3/4"{44Rmm
1 xzi
~-—p—>——-——-—-—»_
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56 U2, BBE57 6 Spline 9/16" 1-1/2R BBC56T1506S9
Montabert- H1 00 9/16" 1-1/4R BBC56T1756S9
FuruKawa-HD260 9/16" 38 BBC56T386S9
Ingersol Rand YH60 9/16" 45 BBC56T456S9
Tokyo Ryuki - YH70 9/1 6" 1 600 BBC56T1 6006S9
9/16" 1700 BBC56T17006S9
J_1 / \ ^/
O
'/vxx ' ' ' '' "
2 - 1 7 nr>Cf ^^ 1 i r 1
(64.3 mm) I I 1-3/4" (44.5 mm) f Jl -3/4"(44.5 mm)
VX^_^Xv j j 'i i
[ \ T \ _y ~^\
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56U2, BBE57 6 Spline EXT 1-1/4R BBE56T1256SE
BBE57 EXT 1-1/2R BBE56T1506SE
Female Thread - External Flushing EXT 38 BBE56T386SE
EXT 45 BBE56T456SE
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56 U2, BBE57 6 Spline 9/16" 1-1/2R BBE56T1506S9T
Montabert - H1 00 9/1 6" 38 BBE56T386S9T
FuruKawa-HD260 9/16" 45 BBE56T456S9T
Ingersol Rand - YH60
i558. 8mm)
T
1-7/8"
147.6mm)
f- ——————————————————S
1^————————————————J
> „ /
1-25/32"
(45.2mm)
J
«& w/vi.
h^ 2-45/64" 6" ---
168.7mm; 1152.4mm)
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - COP150 8 Spline 5/8" 1-1/2R COP150T1508S10
5/8" 38 COP150T388S10
5/8" 45 COP150T458S10
5/8" 1700 COP150T17008S10
r -2241/64"
(575mm)
.///I I/
r 1-3/4" (44.5mm)
& _ _ _ _ _ _ _
f / I \/ / / /
23 64
(9 1mm
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - 1 036HB, 1 038HB, 1 038HD 8 Spline EXT 45 1238MET458SE
External Flushing 1238ME, 1238LE EXT 1700 1238MET17008SE
for 1-3/4 dia. only
-2-55/I
(72.6mm)
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - 1 036HB, 1 038HB, 1 038HD 8 Spline EXT 1-1/4R 1238MET1258SE
External Flushing 1238ME, 1238LE EXT 1-1/2R 1238MET1508SE
for 1-1/2" dia. only 1038HF, 1238HF EXT 38 1238MET388SE
EXT 1600 1238MET16008SE
1-11/32"
1
^——————^ 4/ '
v————*-*-L -^ -k^L-J
f
v
J
——^?— ~ i
Tube Part
Drill Type Style Size Thread Number
Atlas Copco -COP1038HL 8 Spline EXT 1-1/4R 1038HLT1258SE
External EXT 1-1/2R 1038HLT1508SE
EXT 38 1038HLT388SE
Tube Part
Drill Type Style Size Thread Number
Atlas Copco - COP126 5 Spline EXT 1-1/2 COP126T1505SE
External Flushing EXT 38 COP126T385SE
EXT 45 COP126T455SE
58mm |
o
/———————^
?———————1
33.9mm " 1 o
———iF=^
54mm
Tube Part
Drill Type Style Size Thread Number
Atlas Copco- 1032HD 8 Spline EXT 1-1 /4R AC1032T1258SE
Female Thread EXT 1-1 /2R AC1032T1508SE
3-13/16" 25/32"
(96.8 mm) (19.8 mm)
Q
N
(47.6 mm
——— '————*
1-1/4" (31. 8 mm)
t
————1——————— '
1-17/64" (32.1 mm)
t i
Tube Part
Drill Type Style Size Thread Number
Tamrock - L400, 500, HL432, L410 4 Spline 3/8" 1-1/4R TL400T1254S6
Sig- HBM100
Bohler-HM753
———18 1/4"
(463.6mrr
Tube Part
Drill Type Style Size Thread Number
Tamrock - HL438TS, HL538TS 4 Spline EXT 1-1/4R HL438T1254SE
External Flushing EXT 1-1/2R HL438T1504SE
EXT 38 HL438T384SE
EXT 1600 HL438T16004SE
3-13/16"
(96.8mm)
! 1
1-1/2" (38.1 mm) 1-1/2" (38.1 mm)
! ^ "i
L_ ^
Tube Part
Drill Type Style Size Thread Number
Tamrock- HL438 4 Spline 1/2" 1-1/4R HL438T1254S8
1/2" 1-1/2R HL438T1504S8
1/2" 38 HL438T384S8
^fO o^o
I—————j
i
] |
)
D 2-1/32"(52mr{i)
^————.————-———-
20" (51 3mm)
\
// / / / /
• \\ It j i
!
;.'•
I
Tube Part
Drill Type Style Size Thread Number
Tarn rock HL850 8 Spline 3/4" 38 HL850T388S12
Central Flushing 3/4" 45 HL850T458S12
3/4" 51 HL850T518S12
d
**y r*T«: •: ;: T**"
: i..^t^»wnwrN^?^r>
;;
' (
> ID
i 2-1/32"_[52mm) _'
jl / \i -,;
J. ........ ....' __jl ,;
•';
;
:: :L
V/LJV/ ^ /
*———————————J^6j___________ I V- ^——————-————————I'—*****
' ^JLli,^
—«-*Lt^J^U<->~^
^————————^ 26" (667mm)
Tube Part
Drill Type Style Size Thread Number
Tarn rock HL850 8 Spline EXT 45 HL850T458SE
External Flushing EXT 51 HL850T518SE
48 |
_ 37/64"
(14.7mm)
4-5/16"
(109.5mm)
2-7/16"
(61.9mm)"
L.J
x
^—^'^ *
\ /, \l II II II II II II II
Tube Part
Drill Type Style Size Thread Number
Ingersol Rand - VL170 5 Spline 1" 2R VL170T2005S16
1" 1800 VL170T18005S16
1" 2000 VL170T2005S16
1" 2K17 VL170T2K175S16
49
-WS\ » |
W 2«r2 1
80 ,„.,„ UK
* 2i 1
'T
WiLWTi
TI'JTI'I'ITII 1
L_J^=
__ h* h* 6 1/2" - • -~^ -^
46/64t" I165.1mml 3/4"
(17.9m m 119.1mm)
Tube Part
Drill Type Style Size Thread Number
Ingersoll Rand - VL170 4 Fluted 1" 2R VL170T2004F16
1" 1800 VL170T18004F16
1" 2000 VL170T20004F16
1" 2K17 VL170T2K174F16
r~
——— 6-1/2" (165.1 mm) ——-^ i—— 23/32" (18.3 mm)
L . V^x
\-^ / /(62.7mm)
T- , llMW
Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand VL671 4 fluted 9/16 1-1/2" rope VL671T1504F9
old style 9/16 T38 VL671T384F9
9/16 T45 VL671T454F9
9/1 6 2" C-1 7 VL671 T2K1 74F9
9/1 6 Series 1 700 VL671 T1 7004F9
9/1 6 Series 1 800 VL671 T1 8004F9
21" (533mm)
d ——————ZZ>
—————r^
1
i
D 1-3/4"
i
Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand VL671 5 fluted 3/4" 38 VL671T385F12
New Style 3/4" 45 VL671T455F12
3/4" 1700 VL671T17005F12
3/4" 2K17 VL671T2K175F12
_-
, 42.8mm,
5mm 1——1
36mm
1
\\N\V
VOOOO^
i {] J^ 4
=1 11.1mm
50mm
Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand YD90 4 Spline 3/8" 1-1/4R YD90T1254S6
15" - 380mm
3/4"- 18.2mm
2-1/2-64mm
Tube Part
Drill Type Style Size Thread Number
Furukawa PD200 4 Spline 9/1 6" 1-1/2R PD200T1504S9
9/1 6" 38 PD200T384S9
9/1 6" 45 PD200T454S9
9/1 6" 1600 PD200T16004S9
9/1 6" 1700 PD200T17004S9
18" - 460mm
Tube Part
Drill Type Style Size Thread Number
Furukawa PD200 4 Spline 9/16" 1-1/2R PD200T1504S9T
Long Shank 9/16" 38 PD200T384S9T
9/16" 45 PD200T454S9T
7/8"
19-1/2" -495mm
!
^ 1— ' +!Dk
* / /T\ ^
1 -3/4" =
D- ————— 3
A V
^" ' WMJt i /^OtvTll-l
2-3/4"
* B * 71mm
2-3/4 - 70mm
Tube Part
Drill Type Style Size Thread Number
FuruKawa PD200* 4 Spline 9/16" 1-1/2R PD200T1504S9HD
9/16" 38 PD200T384S9HD
*For Heavy Duty Use 9/16" 45 PD200T454S9HD
7/1 6"
11.5mm
28" - 7 1 Omm V-\
i_ * L * W |«
n
I—— r:-:—t —————————W—uyJ %^
1-31/32" 2-7/8"
J
50mm ' "^ 73mm
3-15/16"- 100mm
Tube Part
Drill Type Style Size Thread Number
Furukawa HD500 8 Spline 5/8" 45 HD500T458SS10
5/8" 51 HD500T518SS10
*^ B |*
I w
*
D- Hiiii^T^T^l
^————————— . _-: .- -
^j^JLL*jJ*jJ*
4
B
"X"
(44.5mm)
Tube Part
Drill Type Tangential Style Size Thread Number
Chicago Pneumatic 475 2 LUG 5/8" 1-1/4R CP475T1252L10
5/8" 1-1/2R CP475T1502L10
5/8" 38 CP475T382L10
5/8" 45 CP475T452L10
5/8" 1700 CP475T17002L10
I r -^ 1
1-1/2" (38.1 mm) 1-1/2" (38.1 mm)
i U t I
Tube Part
Drill Type Style Size Thread Number
Montabert - H70 4 Spline 7/16" 1-1/2R MH70T1504S7
7/16" 38 MH70T384S7
7/16" 1600 MH70T16004S7
17-1/2" -445mm
1-1/2" 1-1/2"
I
Tube Part
Drill Type Style Size Thread Number
Joy-JH2 6 Spline EXT 1-1/4R JH2T1256SE
External Flushing EXT 1-1/2R JH2T1506SE
EXT 38 JH2T386SE
15-3/4" -397mm
3-1/8" ->
1 -5/16" 1 -5/16"
I I
Tube Part
Drill Type Style Size Thread Number
Joy JH3 8 Spline EXT 1-1/4R JH3T1258SE
EXT 1-1/2R JH3T1508SE
EXT 38 JH3T388SE
Tube Part
Drill Type Style Size Thread Number
Joy JH4 Female Thread 6 Spline EXT JH4T1006SE
EXT 1-1/4R JH4T1256SE
17-3/4" -451mm
1-1/2"
I
Tube Part
Drill Type Style Size Thread Number
Tarn Rock- HL500 8 Spline EXT 1-1/2R HL500T1508SE
EXT 38 HL500T388SE
»fumm
i 93.3mm ,
~1
if ' (___ ) -J
-w= ——9 b—————=^
79mm
Tube Part
Drill Type Style Size Thread Number
Tamrock-HLIOOO 8 Spline EXT 45 HL1000T458SE
EXT 51 HL1000T518SE
H I - * 1 3.4mm
L— 84mm ——*4
M~ ~\,
_!_
\ 64.5mm i
,———, 16mm
Tube Part
Drill Type Style Size Thread Number
Ingersol Rand - LM500, YH65 6 Sline 3/4" 38 YH65T386S12
3/4" 45 YH65T456S12
\ •• _JL
52.7mm
•^
\^A——^ "" £———J T
23mm
,
Tube Part
Drill Type Style Size Thread Number
Ingersol Rand YH95 8 Spline 1" 51 YH95T518S16
Normal Hardened Structure Note the fine grain outer "case" of uniform
depth typical of high hardness for maximum strength. The interior course-
Fine Grain
grained "core" is of lower hardness which gives toughness to withstand
Coarse Grain
shock. Once this structure is disturbed, breakage is inevitable.
Resharpening Failure Note smooth curved lines starting from outer edge
and extending partly or wholely across the surface sometimes leaving a
coarse-grained area showing complete absence of fine grain (and thus
absence of original hardness). This is the most common type of failure
Coarse Grain which usually occurs from 3" to 5" back from the point resulting from im-
proper heating during resharpening. The comparatively soft area will not
withstand the strain of continued service and breakage is inevitable. Re-
Smooth Curved Lines placement is not warranted.
Tools, like the human body, get tired and snap if they have been pushed too hard and too long. They are
not made to last forever.
_>=»
\ 1
(
x
^-1———«
i— : —r=^
Shank Length Blade Part Shank Blade Part Shank Length Part
Size U.C. Size Number Size Size Number Size U.C. Number
7/8" x 3-1/4" 11" 5"x6" T10500 1"x 4-1/4" 5-1/2" x 8-1/2" T20300 7/8" x 3-1/4" 9" T11200
1"x 4-1/4" 11" 5"x6" T20500 1-1/8"x6" 5-1/2"x8-1/2" T30300 1 ' x 4-1/4" 9" T21200
1-1/8"x6" 11" 5"x6" T30500 1-1/4"x6" 5-1/2"x8-1/2" T40300 1-1/8"x6" 9" T31200
1-1/4"x6" 11" 5"x6" T40500 1"x 4-1/4" 4-1/2" x 8-1/2" T20200 1-1/4" x 6" 9" T41200
1 - 1 /8" x 6" 4- 1 /2" x 8- 1 /2" T30200
1 - 1 /4" x 6" 4- 1 /2" x 8- 1 /2" T40200
Digging Chisels Sheathing Driver Shoes
1-1/8"x6" 8" x 9- 1/2" T30400
1-1/4x6" 8" x 9- 1/2" T40400
^ P,
( *=^L^ \f^ ——)
Bushing Tools
7/8" x 3-1/4" 17-1/4" 3"x10" T10600
£)—<T"——-———m—). 2" T91502
1" x 4-1/4" 17-1/4" 3" x 10" T20600 B
^f )
^^ Jl
^ — shoes Only ——————————————————
1-1/8"x6" 16-1/2" 3"x12" T30600
3" T91503
1-1/4" x 6-1/2" 16-1/2" 3" x 12" T40600
Shank Length Part
Size U.C. Number
Brick Removing Tools 1 " Hex. x 4-1/4" 9" T21100 Dirt Tampers—
1-1/8"Hexx6" 9" T31100 Round & Square
1 -1/4" Hex. x 6" 9" T41100
^v D } 7/8" Hex x 3-1/4"
3/4" Sq. x 2-3/4"
12"
12"
T11100
T51100
3/4" Hex. Rd. x 2-3/4" 1 2" T61 1 00
1"x 4-1/4" 11-1/2" 2-1/8" x 5" T20900 7/8" Hex. x 2-3/4" 12" T71100
1-1/8" x 6" 11-1/2" 2-1/8" x 5" T30900
7/8" Hex. Rd. x 3-1/4" 12" T81100 7"RD T91607
1-1/4" x 6" 11-1/2" 2-1/8" x 5" T40900
Pads Only 6" SQ T91606
8" SO T91608
r~
Frost Wedges
£=[^^
Pneumatic Plug & Feathers
Shank
Set
T92300
T42100
T92300
C
5^wQ
Feathers
Shank Part Blade
Size Number Size
1-1/8" x 6" T30035 4-1/2"
1-1/4" x 6" T40035 4-1/2"
Specify
^<
Shank
Size
7/8" Hex. x 3-1/4"
Length
14"
[B
Part
U.C. Number
T14014
\^^=%=>
( <^——— ^
f\—^^^
18" T84018
24" T84024 7/8" Hex. x 2-3/4" 4-1/2" T70200
7/8" Hex. Rd. x 3-1/4" 4-1/2" T80200
\yy j^^ ^
Narrow Chisels
Specify size rod or pin to be driven Clay Picks
Pin Shank Size
c^—————————^=^
ccz=
Size 1"x4-1/4" 1-1/8"x6" 1-1/4"x6" 1 ^—,____ 0 i
Part No. Part No. Part No. 7/8" Hex. x 3-1/4" 14" T15014
5/8" T21983 T31983 T41983 18" T15018
24" T15024 1 " Hex x 4-1/4" 3" T21300
3/4" T21985 T31985 T41985
3/4" Sq. x 2-3/4" 14" T55014 7/8" Hex. x 3-1/4" 3" T11300
7/8" T21987 T31987 T41987
18" T55018 3/4" Sq. x 2-3/4" 3" T51300
1" T21989 T31989 T41989
3/4" Hex. Rd. x 2-3/4" 1 4" T6501 4
1-1/4" T21991 T31991 T41991 3/4" Hex. Rd. x 2-3/4" 3" T61 300
18" T65018
1-1/2" T21993 T31993 T41993 - 7/8" Hex. x 2-3/4" 3" T71300
7/8" Hex. x 2-3/4" 14" T75014
1-3/4" T21995 T31995 T41995 18" T75018 7/8" Hex. Rd.x 3-1/4" 3" T81300
2" T21997 T31997 T41997 24" T75024
2-1/2" T21999 T31999 T41999 7/8" Hex Rd.x 3-1/4" 14" T85014
18" T85018 Railroad Spike Driver
24" T85024
USN Hex - Oval Collar USN Hex - Round Collar USN RD - Oval Collar USN RD - Round Collar USN Hex USN Round
Part
If ^d
Part
IL/—
3 ^——
It
Part
1
Part
Length Number Number Face size 1-3/4" x 1-3/4" Stock Size and Number Number
Shank O.A. RD. Collar Ov. Collar With Length O.A. RD. HX.
Rd. 8-1/2" T01 H08 T01J08 Shank Length Part Carbide
Collar O.A. Number Insert 3/4 " x 8-1/2" T01C08 T01A08
Hex. 8-1/2" T01 F08 T01G08 3/4 " x 11-1/2" T01C11 T01A11
USN RD. 8-1/2"OA T07DOO
Rd. 11-1/2" T01H11 T01J11 3/4 "X17-1/2" T01C17 T01A17
USN Hex. 8-1/2"OA T07BOO
Hex. 11-1/2" T01F11 T01G11 7/8 " x 8-1/2" T01 DOS T01 608
USN Rd. - 9-3/4" OA T07HOO T17HOO
Rd. 17-1/2" T01H17 T01J17 Rd. Collar 7/8 " x 11-1/2" T01D11 T01B11
Hex. 17-1/2" T01F17 T01G17 USN Rd. - 9-3/4" OA T07JOO T17JOO 7/8 " x 17-1/2" T01D17 T01B17
Oval Collar
USN Hex. - 9-3/4" OA T07FOO T17FOO
Collared Moil Points Rd. Collar Moil Points
USN Hex. - 9-3/4" OA T07GOO T17GOO
3- ' Oval Collar —=)—__J
Rd. 9" T02H09 T02J09 3/4 " x 9" T02C09 T02A09
Hex. 9" T02F09 T02G09 3/4 " x 1 2 " T02C12 T02A12
Rd. 12" T02H12 T02J12 3/4 "x18" T02C18 T02A18
Hex. 12" T02F12 T02G12
Collared Scaling Chisel 7/8 " x 9" T02D09 T02B09
Rd. IS- T02H18 T02J18 r^——_ 7/8 " x 1 2 " T02D12 T02B12
Hex. IS" T02F18 T02G18 o— ——U——
7/8 " x 1 8 " T02D18 T02B18
Part Part
Length Width & Number Number
Collared Flat Chisels O.A. Collar RD. Hx.
Flat Chisels
cr=^_ Q"
9"
1-1/2"Rd.
1-1/2"0v.
T09H09
T09J09
TOQFOQ
T09G09
—————I ,.._ J
Rd. 9" T03H09 T03J09 12" 1-1/2"Rd. T09H12 T09F12 3/4 " x 9" T03C09 T03A09
Hex. 9" T03F09 T03G09 12" 1-1/2"0v. T09J12 T09G12 3/4 " x 1 2 " T03C12 T03A12
Rd. 12" T03H12 T03J12 IS- 1-1/2"Rd. T09H18 T09F18 3/4 "x 18" T03C18 T03A18
Hex. 12" T03F12 T03G12 IS" 1-1/2"0v. T09J18 T09G18 7/8 " x 9" T03D09 T03B09
Rd. 18" T03H18 T03J18 9" 2" Rd. T11H09 T11F09 7/8 " x 1 2 " T03D12 T03B12
Hex. 18" T03F18 T03G18 9" 2" Ov. T11J09 T11G09 7/8 " x 1 8 " T03D18 T03B18
12" 2" Rd. T11H12 T11F12
12" 2" Ov. T11J12 T11G12
Collared Cape Chisels 18" 2" Rd. T11H18 T11F18
Cape Chisels
Rd. 9" T04H09 T04J09 18" 2" Ov. T11J18 T11G18 G^^ r==3
Hex. 9" T04F09 T04G09 9" 2-1/2" Rd. T12H09 T12F09
9" 2-1/2"Ov. T12J09 T12G09 3/4 " x 9" T04C09 T04A09
12" 2-1/2" Rd. T12H12 T12F12 7/8 " x 9" T04D09 T04B09
Collared Round Nose Chisels 12" 2-1/2"Ov. T12J12 T12G12
Rd. 9" T05H09 T05J09 18" 2-1/2" Rd. T12H18 T12F18 Round Nose Chisels
Hex. 9" T05F09 T05G09 18" 2-1/2"Ov. T12J18 T12G18
9" 3" Rd. T14H09 T14F09 ^——'
3"0v. T14J09 T14G09
Collared Diamond Point Chisels 3/4" x 9" T05C09 T05A09
7/8" x 9" T05D09 T05B09
Rd. 9" T06H09 T06J09
Hex. T06F09 T06G09
3" Chisel
> 3" Chisel Scaling Chisels
.^ "
1
—^
"^——^——J
————
l >———— —- ^
n——~s_
L=^——————— j— - x
1 -1/8" x 20-1/2" T33020 ——\ j
1-1/8"x14" T83014
Length Blade
Asphalt Cutte3r Asphalt Cutter
O.A. Width
9" 1-1/2" T09D09 T09B09
CP-250H1
BREAKER SPECIFICATIONS
Weight with Max energy Impact Length Working Hydraulic Hose
adapter plate per blow Rate without pressure oilflow diameter
Type and chisel ft.-lb. chisel at breaker rate
Ib. (J) in. psi US gal/min in.
(kg) */t Hz (mm) (bar) (l/min) (mm)
CP-75H 176 205/ 75 10-25 32.7 1450-2175 3.0-8.2 1
/2
(80) (275/ 110) (830) (100-150) (11.5-31) (12.5)
CP-100H 243 300/ 150 8-21 34.3 1450-2175 4.0-9.2 1
/2
(110) (400/ 200) (870) (100-150) (15-35) (12.5)
CP-250H1 606 850/ 420 5-15 44.3 1450-2175 6.6-18.5 3
/4
(275) (11 507 565) (1125) (100-150) (25-70) (19)
CP-250H2 606 4807 237 10-25 44.3 1450-2175 6.6-17.7 3
/4
(275) (650/ 320) (1125) (100-150) (25-67) (19)
CP-600H 1389 1590/ 815 6-12 56.7 1450-2175 13.7-27.7 1
(630) (2150/1100) (1440) (100-150) (52-105) (25)
CP-700H 1675 2260/1260 4-9 62.6 1450-2030 14.5-31.7 1
(760) (3050/1700) (1590) (100-140) (55-120) (25)
CP-900H 1918 2260/1260 4-9 62.6 1450-2030 14.5-31.7 1
(870) (3050/1700) (1590) (100-140) (55-120) (25)
CP-1400H 3000 3320/1855 4-10 72.8 1450-2320 21.1-47.6 11/4
(1360) (4480/2500) (1850) (100-160) (80-182) (32)
CP-1800H 4189 4890/2730 4.4-8 78.0 1450-2320 29.1-52.8 11/4
(1900) (6600/4000) (1980) (100-160) (110-200) (32)
CP-2000H 4850 4890/2730 4.4-8 78.0 1450-2320 29.1-52.8 11/4
(2200) (6600/4000) (1980) (100-160) (110-200) (32)
'Impact energy calculated on the input power. flmpact energy measured at tool tip.
CP QUALITY TOOLS
From soft rock and asphalt cutting
to hard rock demolition, Chicago
Pneumatic has the right tool for
your job. Each one is made of high-
strength forged steel, and is de-
signed to enhance the efficiency
and reliability of your hydraulic
breaker.
TOOL SPECIFICATIONS
Type Tool Tool width Total length Shank length Shank size Weight
type in. (mm) in. (mm) in. (mm) in. (mm) Ib. (kg)
CP-75H 1 1.77 45 21.65 550 7.88 200 1.77 45 11.0 5
CP-100H 2 — 21.65 550 11.0 5
2 — 27.56 700 17.6 8
3 3.15 80 21.65 550 11.0 5
4 3.15 80 21 .65 550 11.0 5
6 5.90 150 18.90 480 15.4 7
7 5.90 150 18.90 480 15.4 7
CP-250H1 1 3.15 80 31 .50 800 14.57 370 3.15 80 59.5 27
CP-250H2 2 — 31.50 800 59.5 27
2 — 39.37 1000 86.0 39
2 — 55.12 1400 130.0 59
3 5.90 150 31.50 800 59.5 27
3 5.90 150 35.43 900 66.1 30
4 5.90 150 31.50 800 59.5 27
5 — 31 .50 800 66.1 30
CP-600H 1 4.13 105 35.43 900 14.96 380 4.13 105 132.3 60
CP-700H 1 4.13 105 43.31 1100 145.5 66
CP-900H 2 — 35.43 900 132.3 60
2 — 47.24 1200 187.4 85
3 7.09 180 35.43 900 132.3 60
3 7.09 180 43.31 1100 136.7 62
4 7.09 180 35.43 900 132.3 60
5 — 35.43 900 132.3 60
6 11.81 300 35.43 900 132.3 60
7 11.81 300 35.43 900 132.3 60
CP-1400H 1 4.92 125 39.37 1000 18.11 460 4.92 125 209.4 95
2 — 39.37 1000 209.4 95
5 — 39.37 1000 209.4 95
CP-1800H 1 5.31 135 43.31 1100 18.90 480 5.31 135 253.5 115
CP-2000H 2 — 43.31 1100 262.3 119
5 — 39.37 1000 249.1 113
TlRAMAC - MONTABERT
TOO1 CTWC*
i • kkw
rk W 1 APPROX. OVERALL HAM MER BRUNNER NUMBER
MODEL NO. MANUFACTlJRERS NO. WEIGHT
DIAMETER LENGTH POINT CHISEL
POINT CHISEL
BRH 40 1 -3/4" 20" 46472 46474 TC04P20 TC04*20 11
BRH 75/90 2-1/2" 23" 55488 55490 TC16P23 TC16*23 25
Z96 2-3/8" 28" 17552 TC02P28 TC02*28 32
36" TC02P36 TC02*36 40
BRH 125 3-1/8" 26" 36481 36482 TC02P26 TC06*26 43
32" 36554 TC06P32 TC06*32 60
37" TC06P37 TC06*37 78
s ^•••^
1 BRH 250/400 3-3/4" 34"
39"
23987 23990 TC08P34
TC08P39
TC08*34
TC08*39 94
BRH 501 4-1/2" 39" 26132 26136 TC10P39 TC10*39 158
BRH 620 4-1/2" 39" 62299 62301 TC18P39 TC18*39 158
BRV 950 43" TC20P43 TC20*43
50" TC20P50 TC20*50
BRH 750 4-3/4" 44" 57664 57665 TC12P44 TC12*44 180
BRH 1100 5.3" 52" 51836 51837 TC14P52 TC14*52 300
^ STANLEY - *MELROE
TELEDYNE CM
l^^^^^^l ROXON
If the Hammer
Manufacturer or TR 100 2-1/16" 22" 100KOP1 100KOP4 TE16P22 TE16*22 16
Hammer Model TR 200/200X 3" 29" 200KOP1 200KOP4 TE02P29 TE02*29 50
does not appear in TR 400/400X 3-1/2" 33" 400KOP1 400KOP4 TE04P33 TE04*33 77
this catalog, TR602M/602X 4" 36" 5450136 5450137 TE06P36 FE06*36 115
Call your local TR 700/700X 4.3" 36" 5450166 5450167 TE08P36 TE08*36 121
Brunner & Lay TR 800/800X 5-1/2" 40" 800KOP1 800KOP2 TE10P40 TE10*40 245
warehouse for
assistance. VI'ORTHINGTON
1 T500 2-3/4" 27" PNT-18 PNT-21 TD02P27 TD02*27 38
| T1000 3-3/4" 35" PNT-12 PNT-16 TD04P35 TD04*35 97
Casing
Either threaded tubes or weldable tubes of an ordinary commercial
grade of steel are used as the casing. When the tubes are left in the
hole, e.g. in water-well drilling, welded tubes are customarily used.
Threaded tubes are used for such applications as blast hole drilling,
anchoring and grouting, when the tubes will be withdrawn from the
hole and used again. When the tubes are to be pulled out, the
driving cap and adapter sleeve, if any, are replaced by a tube lifter,
which is threaded onto the extension equipment.
Grouting
When ODEX equipment is used for grouting, the cement is injected
through the casing, which is withdrawn successively as the grouting
proceeds. The cement is pumped in through a special injection
sleeve, which is fitted in place of the driving cap.
2. Flushing device
Hose connection 1" 7801-0001-00
Packings (2 pcs) 0795-1806-00
3. Shock absorber package
Spacer 8484-0140-54
Cup springs (3 pcs) 80 x 40 x 5 mm 8484-0140-53
4. Driving cap 8484-0211-57
Wrenches for
Guide sleeve 8484-0211-06
Pilot bit 8484-0211-17
10
11
Shank Adapter
1.50 Rope Central Flushing
Ring Bit
L 20-1/2"
No: ECB57
d - 2-7/8"
ii
d D No: ERB 72
Part No.
D - Dia: 4-7/32" TODRB422
Dia: 4-1/2" TODRB450
Extension Tube
Thread With 3 Entrances Coupling Sleeve
II L 3-15/16"
t
D [" D 2-27/32"
|_1 No: ECS 72
Part No.:
TODAH38
TODAH45
*
*
* of or BaH
on
* pyll
cm
*
* to of 78 at
7
.»* * te ^^M^S
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 164