This document outlines a lesson plan for a course on mechanics of flight and helicopter configuration. The course is divided into 5 units that will be taught over an odd semester in 2022-2023. Unit I covers airflow, aerodynamics, airfoils and forces of lift. Unit II covers forces acting in flight such as lift, drag, thrust and stability. Unit III covers helicopter aerodynamics including rotor systems. Unit IV covers main rotors, rotor heads and flight controls. Unit V covers tail rotors, transmissions and rotor blade mechanics. The course allocates 14 hours to each unit using specified textbooks that are available.
Bentonite Functionalised with 2-(3-(2-aminoethylthio)propylthio)ethanamine (AEPE) for the Removal of Hg(II) from Wastewaters: Synthesis, Characterisation and Hg(II) Adsorption Properties
This document outlines a lesson plan for a course on mechanics of flight and helicopter configuration. The course is divided into 5 units that will be taught over an odd semester in 2022-2023. Unit I covers airflow, aerodynamics, airfoils and forces of lift. Unit II covers forces acting in flight such as lift, drag, thrust and stability. Unit III covers helicopter aerodynamics including rotor systems. Unit IV covers main rotors, rotor heads and flight controls. Unit V covers tail rotors, transmissions and rotor blade mechanics. The course allocates 14 hours to each unit using specified textbooks that are available.
This document outlines a lesson plan for a course on mechanics of flight and helicopter configuration. The course is divided into 5 units that will be taught over an odd semester in 2022-2023. Unit I covers airflow, aerodynamics, airfoils and forces of lift. Unit II covers forces acting in flight such as lift, drag, thrust and stability. Unit III covers helicopter aerodynamics including rotor systems. Unit IV covers main rotors, rotor heads and flight controls. Unit V covers tail rotors, transmissions and rotor blade mechanics. The course allocates 14 hours to each unit using specified textbooks that are available.
This document outlines a lesson plan for a course on mechanics of flight and helicopter configuration. The course is divided into 5 units that will be taught over an odd semester in 2022-2023. Unit I covers airflow, aerodynamics, airfoils and forces of lift. Unit II covers forces acting in flight such as lift, drag, thrust and stability. Unit III covers helicopter aerodynamics including rotor systems. Unit IV covers main rotors, rotor heads and flight controls. Unit V covers tail rotors, transmissions and rotor blade mechanics. The course allocates 14 hours to each unit using specified textbooks that are available.
91334 MECHANICS OF FLIGHT & HELICOPTER CONFIGURATION
LESSON PLAN – ODD SEMESTER 2022 -2023
Book Hours Total Title/ Content No. Required Hours Unit I AIRFLOW& AEROFOIL 14 Physical properties of air 2 Numerical Problems 2 Bernoulli’s principle and Newton’s laws of motion, 2 Applications of Bernoulli’s Principle & Newton’s Laws of motion T1 2 14 Airfoil Profile and terminology 2 Angle of attack and Factors contributing lift generation 2 NACA series 2 Unit II FORCES ACTING IN FLIGHT 14 Lift-weight-drag-thrust 1 Fundamental equation for lift and drag and L/D ratio 2 Longitudinal, Lateral and directional stability 3 Fixed and movable control surfaces T1 2 14 Primary and secondary control surfaces 2 Power plants 3 Take off-climb-landing 1 Unit III HELICOPTER AERODYNAMICS 14 Helicopter configuration 2 Helicopter main parts 2 Dissymmetry of lift, Blade flapping and conning 2 Coriolis effect, translational lift T2 2 14 Ground effect and auto rotation 2 Pitch angle, Thrust-collective pitch 2 Gyroscopic precession and torque 2 Unit IV MAIN ROTOR AND FLIGHT CONTROLS 14 Main rotor head and rotor blades 2 Blade alignment, tracking 2 Static and dynamic balancing of main rotor blades 2 14 Maintenance of rotor head and special inspection T2 2 Flight controls- collective pitch, cyclic pitch and throttle control 2 Mast assembly, Dampeners and stabilizer bar 2 Swash Plate Assembly 2 Unit V TAIL ROTOR AND TRANSMISSION SYSTEM 14 Tail rotor drive shaft & Tail gearbox 2 Main & Tail Rotor blades 2 Pitch change mechanism 2 Operation of Rotor Blades T2 2 14 Engine transmission couplings 2 Drive shaft and clutch mechanism 2 freewheeling units 2 BOOK AVAILABL TEXT / REFERENCE BOOK TITLE/ AUTHOR NO. E / NA T1 Mechanics of flight by Kermode Available
Bentonite Functionalised with 2-(3-(2-aminoethylthio)propylthio)ethanamine (AEPE) for the Removal of Hg(II) from Wastewaters: Synthesis, Characterisation and Hg(II) Adsorption Properties