Professional Documents
Culture Documents
12
12
12
0.91 KB/S l l 53 )
Schematic on mach...
337 KB
main elements
Model:
1,067mm
full length:
Approx. 15,600mm
Approx. 16,900mm
Width:
2,950mm
4,000mm
9.000mm
Bogie Wheelbase:
1,300mm
Wheel diameter:
ballast
15.0 tons
12.9 tons
Ballast loaded
of
14.6 tons
Weight:
46.2 tons
59.2 tons
2) Body structure
Frame: The main frame of the machine holds the fore and aft drive, power transmission and working
equipment.
2,000KN in welded structure with rolled steel, plates and tubes using the latest technology
It is designed to withstand compression forces of (about 200 tons). The front of the mainframe is
equipped with an automatic coupler.
Bogies There are two 2-axle bogies at the front and rear of the main frame. Each axle of the rear bogie is
a drive shaft with a hydraulic motor and travel gearbox.
axle
Mounting system Each bogie is connected to the frame by pivot pins and has two sets of shock
absorbers
The axle car and bogie are made of 8 sets of V-shaped metal rubber (multi-plate rubber blocks).
It is done by
During work, the vegetables are locked by the frame support hydraulic cylinder between the front bogie
and the frame.
Derailment recovery hydraulic cylinders are installed at 4 locations near the machine's axle to enable
derailment recovery position and movement. Equipped with a hydraulic power unit independent of the
machine, derailment recovery can be controlled externally.
Front operator's cab Located at the front of the machine, the ceiling and ceiling are soundproofed with
urethane and steel plates, and there are traveling devices, work control devices, coolers, heaters, etc.
inside the cab. there is The operator's seat can be moved left and right to control the movement and all
work.