Connect an adapter to a J-LINK V9 programmer and open the TD2.jflash project file. Select the connection with the adapter and choose to manually program, read back, and save selected sectors of the original bootloader to a file with a .bin extension. Erase the bootloader from the processor's memory, then flash the adapter with the bootloader file from the X-PRO5 by opening and selecting the file, and manually programming and verifying it. The adapter is now programmed and ready to work with the X-PRO5 server.
Connect an adapter to a J-LINK V9 programmer and open the TD2.jflash project file. Select the connection with the adapter and choose to manually program, read back, and save selected sectors of the original bootloader to a file with a .bin extension. Erase the bootloader from the processor's memory, then flash the adapter with the bootloader file from the X-PRO5 by opening and selecting the file, and manually programming and verifying it. The adapter is now programmed and ready to work with the X-PRO5 server.
Connect an adapter to a J-LINK V9 programmer and open the TD2.jflash project file. Select the connection with the adapter and choose to manually program, read back, and save selected sectors of the original bootloader to a file with a .bin extension. Erase the bootloader from the processor's memory, then flash the adapter with the bootloader file from the X-PRO5 by opening and selecting the file, and manually programming and verifying it. The adapter is now programmed and ready to work with the X-PRO5 server.
Next, click on the connection with the adapter (target-connect)
If you want to keep the original bootloader press target
- manual programming - read back - selected sectors The bootloader has loaded and it remains only to save it. Click File - Save data file as .... enter the name file, select the .bin extension and click save Here we press ok and your bootloader is successfully saved
Further, in order for us to flash the bootloader from the X-
PRO5, we must first remove the bootloader from the processor's memory. presses Target - Manual programming - Erase chip Next, flash the adapter with the bootloader from X-PRO5. Click File - Open Data file ... and select the bootloader file Boot_TD_2.bin click OK Next, you need to program the adapter. Click Target - Manual Programming - Program & Verify
The adapter is programmed and ready to work with
the X-PRO5 server For questions about connecting to the X-PRO5 server, write +7 (926) 222-0554 whatsapp / telegram