The document contains G-code instructions for machining a material that is 92mm by 400mm by 20mm. It describes five toolpaths - Pocket 1, Profile 1, Pocket 2, Pocket 3, and Profile 3. A 0.5 inch end mill is used for the machining. The G-code listings provide cutting instructions for pocketing sections of the material to a depth of 6mm using the end mill.
The document contains G-code instructions for machining a material that is 92mm by 400mm by 20mm. It describes five toolpaths - Pocket 1, Profile 1, Pocket 2, Pocket 3, and Profile 3. A 0.5 inch end mill is used for the machining. The G-code listings provide cutting instructions for pocketing sections of the material to a depth of 6mm using the end mill.
The document contains G-code instructions for machining a material that is 92mm by 400mm by 20mm. It describes five toolpaths - Pocket 1, Profile 1, Pocket 2, Pocket 3, and Profile 3. A 0.5 inch end mill is used for the machining. The G-code listings provide cutting instructions for pocketing sections of the material to a depth of 6mm using the end mill.
The document contains G-code instructions for machining a material that is 92mm by 400mm by 20mm. It describes five toolpaths - Pocket 1, Profile 1, Pocket 2, Pocket 3, and Profile 3. A 0.5 inch end mill is used for the machining. The G-code listings provide cutting instructions for pocketing sections of the material to a depth of 6mm using the end mill.