Professional Documents
Culture Documents
209322824-Msf-300-Air-Compressor 2
209322824-Msf-300-Air-Compressor 2
209322824-Msf-300-Air-Compressor 2
Safety Precautions
Please refer to the Safety Precautions and use accordingly. The precautions specifically
mentioned in this reading material are of great importance concerning safety, so please
follow as noted. The dangers of misuse are divided into three categories.
DANGER : Ignoring this notice may result in death and/or fatal injury and can face
extreme danger.
WARNING : Ignoring this notice may result in death and/or fatal injury.
CAUTION : Ignoring this notice may result in injury and damage to property.
Our company guarantees the performance of all products for one calendar year
from the date of purchase. Our guarantee pertains to the full understanding of the
instructions, transport, and installation of the product. We offer full service to
support the quality of the product as noted in the instructional manual. Parts for
repair and/or replacement covered by the guarantee period is exclusively supplied
by msl compressor The consumer will be responsible for all shipping
costs involved with parts for repair and/or replacement.
Any inquiries concerning repair and replacement can be directed to
msl compressor operations department.
CAUTION
■ Use only tanks that have been inspected, and never pass the pressure limit as
noted on the tank.
■ Do not use contaminated gases. Do not use in an area with heavy dust.
■ When not in use, keep in an open area.
■ Filter should be replaced regularly as noted in the instruction manual.
(Important: Refer to filter replacement instructions prior to replacement)
■ Do not inject oil or fuels during use.
■ To prevent overheating, cool equipment 30 minutes after starting use.
■ User should master instructions and safety precautions in this manual prior to
■ using the equipment.
■ Installation area needs to be free of chemicals and debris.
■ Installation surface needs to be free of erosion.
■ Install in an area with open air flow and minimal exposure to weather conditions.
3. WARNING
WARNING
■ Owner of the equipment should always emphasize precaution to the operator.
■ Accidents should be avoided through careful observation of abnormalities such
as irregular noise from the equipment.
■ Equipment parts should not be altered or relocated in any form.
■ Failure to use recommended parts may result in accidents.
■ Do not remove or alter safety stickers or safety valves.
■ Always examine equipment for missing and irregular parts.
■ Notify us in the event of any discovery of defects, after posting a sign alerting
the equipment out of order.
■ Machinery should always be operated in right lighting. Lighting too bright or too
dark may lead to accidents in operating the equipment.
■ Always check the status of oil and need for changing of oil.
■ Always check the power supply current for the equipment.
4. DANGER
DANGER
◩ SAFETY EQUIPMENT
▪ Safety Valve ▪ Pressure Switch
▪ Electrical Overload Meter ▪ Pressure Gauge
▪ Safety Fully Net
▪ Automatic water drain
◩ SAFETY INDICATORS
No INDICATOR
1 Overheat
2 Electrical Shock
3 Warning
8 Drain
9 Horizontal Placed
6. OTHER DANGERS.
◩ TABLE OF CONTENTS
page no.
1. Safety principles....................................................... 2
2. The regulation of safety prior to operation................. 2
3. Technical Data.......................................................... 4
4. Applied model........................................................... 5
5. Installation ............................................................... 6
6. Operation.................................................................. 6
7. Maintenance.............................................................. 9
8. Troubleshooting........................................................ 15
9. Preventive Maintenance............................................. 16
-. PART LIST
-. AIR FLOW DIAGRAM
-. ELECTRIC DIAGRAM
1
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
1. Safety Principles
1-1 General
■ The user must observe safety principles to prevent accident during operation.
■ The user must pay attention to preventive maintenance table to prevent accident.
2-1 The breathing air compressor generated so much heat that the user have to
avoid a direct ray of light.
2-2 To prevent machine damage by particles and dusts, you must avoid unclean area.
2-3 Can be supplied enough power after confirming voltage and electric current.
2-4 Use standard lubrication oil recommended by manufacturer and changes oil
periodically.
2-5 Pay attention not to flow in water to the air intake port.
2-6 Periodically, the user drain condensation water not to impede air flow.
2-7 Do not adjust pressure regulator without manufacturer's agreement.
2-8 Use air filter recommended by manufacturer.
2-9 Use air filter recommended by manufacturer.
2
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
◩ Manufacturer
▪ Company : MSL COMPRESSOR Co., Ltd.
▪ Address : #553, Seolun-dong, Pocheon-si, Kyonggi-do,
487-030, KOREA
TEL. 82 31 541 7000, FAX. 82 31 542 2999
◩ Safety Device
▪ Pressure switch : Set the pressure and Can stop the compressor in the
automatically setted pressure when the air is filled up.
▪ Overload Relay : Inform the user of overload situation.
▪ Safety valve : Inform the user of abnormal operating.
▪ Safety Guard : Protect the machine from an obstacle.
3
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
3. TECHNICAL DATA
COMPRESSOR SPECIFICATION
NUMBER OF STAGES 3
NUMBER OF CYLINDERS 3
CYLINDER BORE 1 STAGE (mm) 65
CYLINDER BORE 2 STAGE (mm) 24
CYLINDER BORE 3 STAGE (mm) 13
PISTON STROKE 26
SPEED (rpm) 1750
INTERMEDIATE PRESSURE 1 STAGE (㎏/㎠) 7
INTERMEDIATE PRESSURE 2 STAGE (㎏/㎠) 40
COMPRESSOR BLOCK OIL CAPACITY (ℓ) 0.8
AMBIENT TEMPERATURE (℃) 5 ∼ 45
PERMISSIBLE INCLINATION OF COMPRESSOR (℃) 5
BELT SIZE (inch) A-47
PULLEY SIZE (inch) 7
MOTOR SPECIFICATION
POWER (HP(kW)) 3(2.55)
SPEED (rpm) 3480
PULLEY SIZE (inch) 3.5
4
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
4. Applied MODEL
1. SUCTION FILTER
2. CONTROL BOX
3. START S/W
4. PRESSURE S/W
5. OIL DRAIN
6. WHEEL
7. OIL GAUGE
8. ON/OFF S/W
9. AIR CLEANING FILTER
10. MOTOR
5
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
5. Installation
6. Operating
6
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
CONNECT
DISCHARGE
VALVE AND AIR
TANK
OPEN THE
DISCHARGE VALVE
(CCW)
LOCK THE
VENTING
VALVE (CW)
※CAUTION :
DO NOT FASTEN
TIGHTLY
7
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
8
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
7. Maintenance
9
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
10
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
▪ THERMAL RELAY
- In case of the motor's being stopped by overload, settle the problem and
press the reset bar then relay will run because relay is standardized by the reset
method of hand-operated
- Check the screw and Fasten it per 4 months.
- Clean electromagnetic contact surface per 4 months to remove the reason of noise.
- Adjust control circuits voltage to rated voltage of operating coil as exactly as
possible.
7-7 MOTOR
▪ Checking points
- Check if the motor shaft can smoothly rotate by the hand or not.
- Check The Belt tension and specifications in case of exchanging it.
- Check if the power supply(Voltage, Frequency, Phase)is conform to name plate.
- Power connections are performed after verifying the conformity with that of
name plate.
▪ Check during Operation
- The operating current of continually used motor must be lower than marked
(name plate) current If the operating current is higher than marked current,
check the motor.
- In order to check the rotation direction and wiring, operate motor under no
loading.
- If the rotating direction is reversed, interchange two lines among three lines
11
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
① ➡ ② ➡ ③ ➡ ④ ➡ ⑤
12
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
10 mm
13
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
14
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
8. Troubleshooting
Failure of safety 1.Ingress of external solid * Clean up the ingress of solid bodies and liquids
valve bodies and liquids * Change safety valve
15
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
9. Preventive Maintenance
PERIOD
ACTION
TIME DAY WEEK MONT QUAR HALF YEAR 2
HOUR H -TER -YEAR YEAR
Clean and assembling condition
●
(each part of compressor)
Check SEPARATOR ●
Clean SEPARATOR ●
16
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
P A R T L IS T
MODEL : MSF-300
18
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
B. HEAD ASS'Y
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
B. HEAD ASS'Y
KEY No. PART No. DESCRIPTION (Q'ty) NOTE
E. SEPARATOR SET
M SL COM PR ESSOR AIR COMPRESSOR MANUAL
E. SEPARATOR SET
KEY No. PART No. DESCRIPTION (Q'ty) NOTE
MEMO