Professional Documents
Culture Documents
Project Name Flintstone Engineering Elevator Technical Specification
Project Name Flintstone Engineering Elevator Technical Specification
Project Name Flintstone Engineering Elevator Technical Specification
Speed 1.6m/sec
Floors 14 floors
Opening 14 openings
3. Controlling System
❖ VVVF Automatic Error Detection, light ON/OFF programmable load and
overload control car position indicator full collective and selective
❖ The MRL control panel is suitable for manual and all types of
automatic doors. Early door opening and leveling can be done.
❖ It is produced in accordance with EN 81-1 + A3 standards.
❖ Arl 300 has a control card.
❖ Up to 4 elevators can work as a group.
❖ Compatible with synchronous and asynchronous motors.
❖ ARD recovery is available. (Easy direction)
❖ 7 Segment & Gray Code & Binary Code display outputs are available.
❖ Double automatic door control for double entry elevators.
❖ Panel cabinet lighting and fan are available.
❖ Easy assembly can be done with the serial communication card.
❖ Arkel A-drive inverter options are available.
Cabin Ceiling Interior opening, mirror St. St., laser cut with indirect lighting
Cabin Ventilation Square Fan 220V 12/12, upon request Special Fan 220 V 15/60
Interior coatings of our production LIBERTY model elevator cabin consists of hairline stainless steel. Hairline stainless
steel coatings are laid horizontally. Side elevator cabin walls consist of 5 pieces and the underside of the mirror is 2
pieces of hairline stainless steel. According to our customers’ requests interior coating design may be customized.
Mirror stainless steel was placed between the hairline stainless steel as an accessory.
On the rear wall 6 mm half height bisote mirror is used in our LIBERTY model elevator cabin.
In our LIBERTY model elevator cabin 20 mm special natural granite is used for flooring. According to our clients requests,
standard granite stone coating or PVC floor are also applicable.
In our LIBERTY model elevator cabin internal electrical installations and lighting are ready to use in the elevator ceiling.
Our lift cabin ceiling is designed as a hinged system easily opening from inside. In this way, the lighting in the ceiling of
the elevator cabin can be easily modified without departing from the cabin. Elevator ceilings consist of laser-cut
patterned stainless steel mirrors.
Our elevator cabin interior handle consists of a piece of stainless handrail. Thanks to the handrail fixation application, the
slackening problem of the handrail can easily be solved by tightening the bolts from inside the elevator cabin. At the
same time if needed it is possible to change the handrail from inside of the elevator cabin.
The ventilation holes consist of the cabin walls for the lift car interior ventilation system. There is a 220 V 12x12 square
fan ventilation system in the cabin ceiling. More powerful 220 V 15/60 special square fan ventilation system is optional.
Floor Picture
■ Surface Mount
■ Easy Installations,
■ Stylish Design
■ Aesthetic Image,
■ 7 Segment ve Dotmatrix
■ Indicator Options
■ Barile supportive
■ Stylish Design
■ Flush Mount
■ Special Hingle System
■ Secret Fixing
■ Multifunctional Display Panel
■ Barile supportive
TECHNICAL SPECIFICATIONS
10. Full height curtain of light photocell infrared full height screen
11. Motor
Speed governor