Professional Documents
Culture Documents
PIN Connection For RJ - 45 and USB
PIN Connection For RJ - 45 and USB
2-Strip off the blue shield until the exposed wires extend just beyond the platform on the RJ-45
connector.
3-Follow the colour code for T-568A and insert the individual wires.
5-Connect the Orange wire of the USB to the Green (#2) of the RJ-45 connector, The Yellow to
White/Blue (#5), and the Black to Orange (#6).
6-The White/Orange (#3) of the RJ-45 will be used as a substitute for the Microphone to send an audio
signal to modulate the Transmitter while the Blue (#4) is the common/ground for the substitute signal.
7-White/Green (#1), White/Brown (#7) and Brown (#*) are not used and can be cut off.