PART A: PARTICULERS OF SAMPLE SUBMITTED:
Nature of sample ‘Sandal And Slippers Specification
Grade/Variaty/TypeiClass -
Brand Name, if any Meera Enterprises
Declared Value, if any ‘Slipper: Upper- Non Leather, Insole Foot Covering- With Insole,
Mid Sole- Without, Outsole- Other than single layer(PVC), Lining-
Without leather, Edge binding without, Toe post- without, back strap-
NA, size- 39
Code No, 10155130202988'1
Batch No. & Dato of Mig. 231012 & 12/10/2023
‘Quantity of sample received 4 Pairs
Condition of sample received Satisfactory
Mode of packing i
Manner of seal
Manner of Signature :
‘Other information if any é
PART-B: SUPPLIMENTARY INFORMATION:
'2) Reference fo the sampling procedure, wherever applicable: NIA
'b) Supporting to the documents for the measurement taken and result derived ike graph, table, sketches, and/or
pphotographs as appropriate to test repor, if any [To be attached]: NIA
«c) Deviation from the test methods as prescribed in relevant ISS/work instruction, if any : NIA
PART - C: TEST RESULTS:
‘TEST REPORT AS PERIS 6721 : 2023
ty of Test repor (5), Scan QR code to get orginal data,
Test Method: IS 6721: 2023 Test performed on: 04-11-2023 to 09-11-2023,
S| Gtause | Teste) Unit ‘Spectied Result obtained
No. | No. requirement
T (5 Size and fittings - 39.0 39.0
(as per IS 1638)
2 [6 ‘Construction >| The footwear may Be Complies
‘made in fully moulded
‘construction or
stitched or assembled
cr through lasting
‘operation as required
‘as per design and
style, may also
have single or
‘Authentication: To Chock authent
‘multiple layer at
bottom sole
a 7 Waterfal
TA Upper and insole = | may be made up of ‘Complies
‘any type ofnatural or | ( Textile & Callulose board )
‘synthetic material or
‘combinations theraof72 Lining (iF used) ~ [fused may be made Complies
up of any type of (Textile)
natural or synthetic
material or
combinations thereof.
it may or may not be
sandwiched with
foam
73 Bottom sole and mild sole >| may be made up oF Complies
(fused) any type of natural or (Pvc)
synthatic material or
Combinations thereof
Itmay be solid or
cellular in structure
75 | Insole Foot Covering =| Insole foot covering, Complies
used may be (Synthetic)
cushioned with foam
q to give comfort to the
5 75 Edge Binding = | Edge binding, if Complies
z required may be
a used.
Sayan Upper
= ‘Tho raw material of upper ofthe sandal and slipper shall conform to the requirements as specified in Table 1
3 (all Materials)
&
5 2.1 ref | Tear Strength N
§ Table 1. | (as per Method B of IS 7016
a S.no1 | P3!Sec-1 or as per IS 5914 P-5/
3 Sec?)
x 2) Other than moulded upper 30.0 min 345
5 material
3
3] ) For all moulded upper 18.0 min NA
2 material
i Bi ref | Flexing endurance - No crack at No cracks observed
z Table 1 | (as per IS 8085 P-20) 75000 flexes.
$ S:no2
2/5 [82 | Insole Covering
= The raw material of insole covering ofthe sandal and slipper shall conform to the requirements as specified in
; Table 2 (Applicable to Textile, Coated Fabric, Leather and Micro-fibre)
2 B.2ret_| Tear strength N 30.0 min 323
i Table 2 | (as per Mathod 8 ofS 7016 P-
Snot | 3iSec-1)‘Authentication: To Check authentic of Test repot (3), Sean QR cade to get origina deta
Barat
‘Abrasion resistance
Table 2 | (as per IS 8085 P-6)
Sno2 | a) Atdry condition No hole formation at No hole observed
412800 cycles
b) At wet condition No hole formation at No hole observed
3200 cycles:
33 | Lining
‘The raw material of ining ofthe sandal and slipper shall conform to the requirements as specified in Table 3
(all material)
3 ref_| Tear strength N 70.0 min: 146
Table 3 | (as per Method B of IS 7016 P-3
Snot | Sec)
3ref_ | Abrasion resistance =
Table 3 | (as per IS 8085 P-6)
Sno2 | a) Atdry condition No hole formation at No hole observed
12800 cycles
b) At wet condition No hole formation at No hole observed
3200 cycles:
a4 ‘Outsole
22) The outsole of sandal and slipper made of leather material shall conform to the requirements as specified
in Tabled =
@4ref_ | Grain crack index z 216 NA =
Table 4 | (as per IS 5914 P-7) =
Snot =
@Aref | Density gem 0:90 min NA =
Table 4 | (as per IS 5914 P-4)
Sno2
@4ref_| Abrasion resistance inves NA
Table 4 | (as per Annex B)
Sno3 | a)Good <3.0
b) Moderate 3.4.7.0
Poor 37.0
34] outsole
‘Outsole of the sandal and slipper made with materials other than leather material shail conform to the
requirements as specified in Table 5
4ref_| Density gan
Table 5. | (as per IS 3400 P-9)
Snot | a) Cellular <0.90 NA
b) Solid 20.90 1.04‘Authentication: To Check authenticay of Test report (s), Scan QR code to get orginal data,
S.drof| Abrasion resistance (Volloss) | mm
Tabla | (as por S 3400 P-3)
Sno2
a) Cellular (at SN force) 600 max. NA
b) Solid (at 10N force) 350 max. 187
Tarot | Flexing resistance, at 30000 + We spentaneous cack No crackobsorved
Table 5 | flexes
S.no 3. (as per IS 8085 P-4)
&5 | Requirements of Complete Sandal/Slipper
‘The sandal and slipper shall conform tothe physica requirements as speciied in Table 6
&Sref | Bond strength (Apoicabie when | Nim 26 min 289
Table 6 | fore partis fly covered or strap it material tear, in which
Snot | widths more than 25 mm) case the bond strength
{as per 8 15298 P-1) 1.5Nmm
ES ref | Toe post attachment sirength N 00min NA
Table 6 | (Applicable if toe post is present)
Sino? _| (as por Annex C)
8.5 ref | Toe ring attachment strength N 80 min. NA
Tabla 6 | (Applicable foe rng isnot integral
Sno’ | partof upper)
(as per Annex C)
ES ref | Strap to outsole strength N
‘Table 6 | (as per 1S 8085 P-11) 200 min. NA
‘S.no 4 a) More than 20 mm strap width 150 min. NA
)10 mm to 20 mm strap width 10min NA
o) Less than 10 mm strap width
3S rof_| Attachment strength of back
Table 6 | strap and BuckleD-ring N 200 min NA
Sino5 | (as per Annex D) NA
8) More than 20 mm strap with NA
'b)10 mm to 20 mm strap width
c) Less than 10 mm strap width
SSref | Attachment strength of elastic, | % ‘30min NA
Table 6 | limit of useful extension
S06 | (as por IS 8085 P-12)
SS ref_| Attachment strength of back N 00min NA
Tabla | strap and Velcro
S.no7 | (as per Annex D)
ES ref | Hydrolysis resistance, mm ‘SO max NA
Table 6 | Cut growth after 150 000 flexes
S.no 8 (Applicable for PU sole only)
(as por Annex B)B5ref_ | Heel pull off strength 500 min. NA
Table 6 | (Applicable for hool height 40 mm N
S.no.9 | and above attached separately to
the sandalislipper)
(as per IS 8085 P-10)
B5rat_| Inter layer bond strength Niven 25min NA
Table 6 | (Applicable for multi-layer sole) if materal tear, in which
S.n0 10 | (as per |S 15298 P-1) cease the bond strength
1.5 Nim,
B5rel_| Slip Resistance, Coefficient of =
Table 6 | Friction (COF) 0.3 min.
S.n0 11_| (Not applicable for leather sole)
(as per Annex E of IS 15844 P-1)
2) Dry Condition:
Condition A (Forward hee! slip) oad
Condition (Backward forepar 0.40
g B) Wet Conon:
= Condition A (Forward hoo! stip) 0.42
— Condition B (Backward forepart 038
e sip)
4/9 [86 | Chemical requirement of Complete Sandal and Slipper
| 3.61 | Al the component of sandal and sipper shall comply with Table TofS 17011 for elcal substances
§ ‘Component No (# see note 7)
5) [Tablet Aiergenie and carcinogenic aisperse ayes | 7 Zs 7 =] 8
S.no.1_ | (as perlS 16914 P-283)
Bon ays
ql Disperse Blue 3 mal [<0 | NO] NO] ND] NA] NA] NA] ND-[_NA
£ Disperse Blue 7 mgl_| <0 | ND |ND| ND | NA | NA | NA | ND | NA
z Disperse blue 25 mot_|_<10_[ ND | ND[ ND | NA] NA | NA | ND | NA
=| Disperse Blue 102 mg | <4 | ND [ND | ND | NA | NA | NA | ND | NA
s Disperse brown 1 mg | ~<10| ND] ND] ND] NA] NA] NA] ND] NA
=| Disperse yellow 1 mg | <0 | ND | ND | ND | NA | NA | NA | ND | NA
8 Disperse yellow 9 mg_| <10_| ND | ND | ND | NA | NA | NA | ND | NA
e| Disperse yellow 30 magi} <0] NO] ND] ND] NA] NA] NA] NO] NA
Al Disperse yellow 49 mgt} <1] ND | ND] ND-| NA] NA] NA] ND] NA
i Disporse orange 1 mig} 10 NO“ ND-|-ND-|-NA~}-NA~| NA} NON
3 Dispersa red 17 mgt | ~