Professional Documents
Culture Documents
Product Manual IS 5676
Product Manual IS 5676
September 2023
https://www.bis.gov.in
उत्पाद मानुयल
संचकित सख्त रबड़ िे तले और एकड़यााँ
आई एस 6565: 5996
PRODUCT MANUAL
FOR
MOULDED SOLID RUBBER SOLES AND HEELS
ACCORDING TO IS 5676 : 1995
भारतीय मानि ब्यूरो (अनु रूपता मूल्ांिन) किकनयम 2018 िी स्कीम-I िे तहत यह उत्पाद मानु यल
प्रमाणीिरण िे प्रचलन मे रीकत और पारदकशिता िे सुसंगता सुकनकित िरने िे कलए सभी क्षे त्रीय/शाखा
िायािलयों एिं लाइसेन्स धाररयों द्वारा सं दभि सामग्री िे रूप मे उपयोग किया जाएगा। बीआईएस
लाइसेन्स/प्रमाण पत्र प्राप्त िरने िे इच्छु ि भािी आिेदिों द्वारा भी इस दस्तािे ज़ िा उपयोग किया जा सिता
है ।
This Product Manual shall be used as reference material by all Regional/Branch Offices & licensees
to ensure coherence of practice and transparency in operation of certification under Scheme-I of
Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 for various products. The
document may also be used by prospective applicants desirous of obtaining BIS certification
licence/certificate.
1
PM/ 5676/ 2
September 2023
4. निरीक्षण व परीक्षण स्िीम : कृ पया Annex-B दे खें
Scheme of Inspection and Please see Annex – B
Testing Note: Please see Cl. 7 of the SIT for Applicability of SIT
for Small and Micro Scale Enterprises
5. एि किि में संभ ववत परीक्षण : Finish, Design, Construction, Thickness, Channel, Tensile
Possible tests in a day : strength, Elongation at break.
6. ल इसेन्स ि ि ययक्षेत्र / Scope of the Licence:
IS 5676 : 1995 िे अिुस र म िि मुिर ि उपयोग िरिे िे नलए ल इसेन्स निम्िनलखित
ि ययक्षेत्रिे नलए प्रि ि किय ज त िै
“Licence is granted to use Standard Mark as per IS 5676 : 1995 with the following scope:
उत्प ि ि ि म संचकित सख्त रबड़ िे तले और एकड़य ाँ
Name of the product Moulded Solid Rubber Soles And Heels
Class Type 1 -For use with leather shoes and/ or
Type 2 -For use with rubber or rubber combination
2
PM/ 5676/2
September 2023
Annex A
PRODUCT MANUAL
FOR
MOULDED SOLID RUBBER SOLES AND HEELS ACCORDING TO IS 5676 : 1995
The above list is indicative only and may not be treated as exhaustive.
3
PM/ 5676/2
September 2023
ANNEX B
SCHEME OF INSPECTION AND TESTING
FOR
MOULDED SOLID RUBBER SOLES AND HEELS ACCORDING TO IS 5676 : 1995
1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped (as per the
requirement given in column 2 of Table 1) and staffed, where different tests given in the specification
shall be carried out in accordance with the methods given in the specification.
1.1 The manufacturer shall prepare and implement a calibration plan for the test equipment.
2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out to establish
conformity.
3. PACKING AND MARKING – The Standard Mark as given in Schedule of the licence shall be
marked on each sole (with/without heels) and each heel provided always that the moulded solid rubber
Soles and heels to which this mark is thus applied conforms to every requirement of the specification.
3.1 Marking shall be done as per the provisions of the Indian Standard. In addition, the following
details shall be mentioned (through tags/stickers or otherwise) on the package/Product (in case only
bulk packaging is done):
a) BIS Licence No. CM/L .......
b) Name and address of Manufacturer
c) BIS website details i.e. – “For details of BIS certification please visit www.bis.gov.in”
3.2 Packing – The material shall be packed (if applicable) as per clause 6.3 of IS 5676:1995
4. CONTROL UNIT – For the purpose of this scheme, all finished solid Rubber Soles and heels
produced in a day or any other quantity as defined by the manufacturer, of the same type, dimension,
design and manufactured from the same type of rubber shall constitute a control unit.
5. LEVELS OF CONTROL - The tests as indicated in column 1 of Table 1 and the levels of control
in column 3 of Table 1, shall be carried out on the whole production of the factory which is covered by
this plan and appropriate records maintained in accordance with paragraph 2 above.
5.1 All the production which conforms to the Indian Standard and covered by the licence should be
marked with Standard Mark.
4
PM/ 5676/2
September 2023
7.1 Compliance to the Scheme of Inspection and Testing is OPTIONAL for Micro, and Small Scale Units
with respect to the requirements for Clause 1(Laboratory), Clause 2 (Test records), Clause 4 (Control
Unit) and Clause 5 (Levels of Control) of the SIT. However, ALL units shall ensure compliance of their
products to the requirements of the Indian Standard.
7.2 The requirements of SIT with respect to Clause 3 (Packing and Marking) and Clause 6 (Rejection)
shall be followed by all.
5
PM/ 5676/2
September 2023
Note-1: Whether test equipment is required or sub-contracting is permitted in column 2 shall be decided by the Bureau and shall be mandatory.
Sub-contracting is permitted to a laboratory recognized by the Bureau or Government laboratories empanelled by the Bureau.
Note-2: Levels of control given in column 3 are only recommendatory in nature. The manufacturer may define the control unit/batch/lot and submit
his own levels of control in column 3 with proper justification for approval to BO head.