Professional Documents
Culture Documents
DENITRIFICATION
DENITRIFICATION
Denitrification in wastewater treatment is the conversion of nitrate (N03) to nitrogen gas (N2). It is a
process that involves the reduction of nitrogen present in waste streams to an acceptable level so the
treated water can be discharged into the environment via streams, ponds, lakes, etc.
Lowering nitrate levels in a waste stream is achieved through creating an anoxic environment in which
heterotrophic bacteria use nitrate as an oxygen source to break down organic substances.
The first step to achieve efficient nitrification is to establish the conditions required for this process.
In the denitrification process, an anoxic zone is created by using an unaerated tank where the
dissolved oxygen levels are kept below 1 mg/l and as close to, without reaching 0 mg/ as possible. A
target operating point would be between 0.2 to 0.5 mg/l.
The concentration of mixed liquid and suspended solids must also be kept in balance. The pH of the
anoxic zone should be close to neutral (7.0) and never drop below 6.5.
There must also be a carbon source. Typically 2.72 mg BOD5 are required per mg of NO3-N removed.
Activating Denitrification
The goal of the denitrification process is to bring the waste stream within permitted nitrogen levels.
Mixer Configuration
When optimizing a mixer design for an anoxic tank, the main considerations are:
Impeller design is the most important factor since it determines the directional flow and level of
pumping within the tank.
Fibrous material, which was not eliminated by screening or grinders in the front end of the treatment
plant, may create build-up on a hydrofoil impeller. Accumulation of materials on an impeller can
compromise the axial direction, making it more like a radial flow. This increases the likelihood of
introducing a swirl or vortex on the surface of the effluent. The result is an incorporation of unwanted
oxygen into the tank. An anti-ragging impeller should be used to maintain optimal mixer performance
and a strong axial flow.