Professional Documents
Culture Documents
Mastermatrix 362 Tds
Mastermatrix 362 Tds
MasterMatrix 362
Viscosity modifying admixture
MasterMatrix 362
220
Rheologymodifying
Viscosity modifyingadmixture
additive for concrete and shotcrete
Mixing Packaging
MasterMatrix 362 admixture is typically added with the initial MasterMatrix 362 is available in 20 litre cubes, 1000 litre
mix water. pallecons and bulk delivery.
Alternately, MasterMatrix 362 admixture may be added after
all other concreting ingredients have been batched and Storage & Shelf Life
thoroughly mixed, either at the batch plant or at the jobsite.
Keep only in the original container in a cool, well-ventilated
Compatability place. Protect from direct sunlight. Store protected against
freezing.
MasterMatrix 362 admixture is compatible with most other MasterMatrix 362 has a shelf life of 12 months.
admixtures used in the production of quality concrete including
normal, mid-range and high-range water-reducing admixtures Precautions
and air-entraining admixtures.
MasterMatrix 362 admixture is also compatible with typical For the full health and safety hazard information and how to
accelerators, retarders, extended set-control admixtures, safely handle and use this product, make sure that you obtain
corrosion inhibitors and shrinkage reducing admixtures. a copy of the Safety Data Sheet (SDS) from our office or
However a field trail is recommended to ensure appropriate website.
performance.
Disclaimer
MasterMatrix-362-ANZ-V10-0723
The technical information and application advice given in this MB Solutions Australia Pty Ltd publication are based on the
STATEMENT OF present state of our best scientific and practical knowledge. As the information herein is of a general nature, no assumption
RESPONSIBILITY can be made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for checking
the suitability of products for their intended use and for ensuring that the application and use of the product is in accordance
with the manufacturer’s guidelines and recommendations.
Field service where provided does not constitute supervisory responsibility. Suggestions made by MB Solutions Australia
NOTE Pty Ltd either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they,
and not MB Solutions Australia Pty Ltd, are responsible for carrying out procedures appropriate to a specific application.
MB Solutions Australia Pty Ltd MB Solutions New Zealand Ltd Emergency Advice:
ABN 69 634 934 419 45C William Pickering Drive 1300 954 583 within Australia (24hr)
11 Stanton Road Albany, Auckland 0800 001 607 within New Zealand
Seven Hills NSW 2147 New Zealand