Professional Documents
Culture Documents
MAP-001 - R0 Material Proposal For Curing Compound
MAP-001 - R0 Material Proposal For Curing Compound
Description Date
0 Issued For Construction 07-12-2022
Approved Reviewed
Approved with comment(s)
Returned with comment(s)
Other(s):
Signature
Name
Date
Signature
Name T. SAKO Y. FUNAHASHI K. HAMADA
Date 07-12-2022
TOA CORPORATION
Singer Project Office
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
Table of Contents
1. INTRODUCTION .................................................................................................................................................................. 2
2. REFERENCE SPECIFICATIONS, TESTING STANDARDS AND DOCUMENTS ............................................................................. 2
3. GENERAL PRODUCT INFORMATION ................................................................................................................................... 2
4. VENDOR INFORMATION ..................................................................................................................................................... 3
APPENDIX A................................................................................................................................................................................ 4
APPENDIX B ................................................................................................................................................................................ 5
APPENDIX C ................................................................................................................................................................................ 6
1
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
1. INTRODUCTION
This document describes the proposed Curing compound products to be used for the Production Facility Project
for SINGER BANGLADESH LTD., located at Araihazar, Narayanganj, Bangladesh.
ASTM C156 Standard Test Method for Water Retention by Concrete Curing
Materials
Product Concure WB
Manufacturer/Vendor BERGER – FOSROC LTD
Application Concrete Curing
Other Specification Refer to Appendix A
2
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
4. VENDOR INFORMATION
The following are the information of vendors for the proposed curing compound products.
3
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
Appendix A
- Concure WB Product Date Sheet
4
Concure WB White constructive solutions
Wax based concrete curing compound The use of curing membranes on internal floor slabs is
generally to be avoided where additional surface finishes are
Uses to be applied. Concure WB White is however ideal where the
concrete surface of a floor slab is to be left as ‘finished’.
For spraying on freshly cast concrete, or newly exposed
concrete surfaces after removal of form work, to form a Technical Support
temporary membrane which will retain sufficient moisture for Fosroc offers a comprehensive range of high performance,
effective curing to take place. Used for concreting gener- high quality concrete repair and construction products. In
ally but especially useful for large areas of concrete such as addition, Fosroc offers technical support service to speci-
pavements, runways and bridge decks; also for vertical fiers, end users and contractors, as well as on site technical
or sloping surfaces as on towers, chimneys, canal linings, assistance in locations all over the country.
columns and beams, where water curing is difficult or
Properties
unreliable.
Density : 1.00 to 1.01 g/cc
Advantages
Colour : Milky White
Single application : Forms moisture barrier for whole of the
curing period. Water loss (ASTM C156) : <0.55 kg/m2
No other curing necessary : Eliminates use of water, hessian Reflectance (E1347) : >60%
or sand completely.
Drying time (ASTM C309) : < 4 hrs
Reliable : No risk of erratic or poor curing and ensures that
Minimum application temperature : 100C
cement hydrates efficiently.
page 1 of 2
Concure WB White
In all cases the nozzle of the spray should be held approximately Precautions
450mm from the concrete surface and should be passed back
Health & Safety instructions
and forth to ensure complete and even coverage. The pump
pressure should be maintained at a level to produce a fine spray Concure WB White is non toxic. It is advisable to wear goggles
ensuring complete coverage of the surface. when spraying. Inhalation of the spray should similarly be
avoided. Should skin contact with the compound occur it shall
Rate of application depends on requirements but is typically
be washed with clean water and a skin conditioning cream shall
within the range of 200 to 285 ml/m2.
be applied. If Concure WB White comes into contact with
Equipment eyes it shall be washed with clean water. If irritation persists,
The preferred and generally used equipment is a knapsack immediate medical attention shall be sought. If the compound
sprayer of the type commonly used in horticulture or pest is swallowed, vomiting should not be induced but medical as-
control. The ideal type is a knapsack sprayer with a capacity sistance shall be obtained immediately.
of between 5 - 10 litres fitted with a 2.0m lance and adjustable Fire
spray nozzle.
Concure WB White is water based and non flammable.
Equipment cleaning
Additional information
Immediately after use the spray equipment should be cleaned
The Fosroc range of associated products includes high
out thoroughly with fresh water. If the spray nozzle becomes
strength cementitious, epoxy grout, polyester resin based
blocked with wax particles these can easily be removed using
mortar for rapid presetting of steel shims to level or for di-
white spirit or similar fluid.
rect bedding of small base plates; Resin anchoring systems
Estimating for same day anchoring of bolts in drilled holes in con-
Packaging crete or rock. Also available a range of products for use in
construction; viz., admixtures, curing compounds, release
Concure WB White is available in 5, 20 & 200 litre drums. agents, flooring systems and repair mortars.
Storage Separate datasheets are available on these products.
Concure WB White has a shelf life of 6 months when stored
at temperatures between 50C and 350C. Containers should
be kept airtight to prevent surface evaporation. Freezing or
prolonged exposure to direct heat or sunlight must be avoided.
Important note :
Berger Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms
and conditions of sale, copies of which may be obtained on request. Whilst Berger Fosroc endeavours to ensure that any
advice, recommendation specification or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products whether or not in accordance with any advice, specification, recommendation or information given by it.
page 2 of 2 BFL/2022/0215/B
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
Appendix B
- Sika Antisol A-4 Product Data Sheet
5
PRODUCT DATA SHEET
Sika® Antisol® A-4
WATER DISPERSED, ACRYLIC COPOLYMER BASED CONCRETE CURING COMPOUND
PRODUCT INFORMATION
Composition Water-dispersed, acrylic copolymer
Packaging 230kg
Appearance / Colour Milky white liquid
Shelf life 6 months from date of production if stored properly in unopened original
packaging.
Storage conditions Store in dry condition at temperatures +10 to +40°C. Protect from frost
and direct sun light.
Density ~ 1.01 kg/l @ 25°C
1/2
Specific Advice After application the coating are must be protected from rain for at least 2
– 3 hours.
▪ To prevent clogging, regular cleaning of jet sprays during application is
recommended.
▪ Sika® Antisol® A-4 can be sprayed using most common spraying equip-
ment.
▪ Sika® Antisol® A-4 can be overcoated with other coating.
▪ Early application of Sika® Antisol® A-4 will help prevent plastic shrinkage
cracks from occurring by reducing the amount of water evaporating. Con-
crete curing compounds, however, will not counter the effects of crack-
ing that may occur as a result of long term drying shrinkage. Standard
concrete practice must be applied when positioning construction joints
and shrinkage control joints.
APPLICATION INFORMATION
Consumption 5 to 6.5 m2 per liter depending on wind, humidity and temperature condi-
tion. Actual dosage to be finalised on the basis of site trials.
SikaAntisolA-4-en-BD-(12-2019)-1-1.pdf
2/2
SAFETY DATA SHEET
Sika® Antisol A4
Revision Date 03.04.2020 Print Date 03.04.2020
2. HAZARDS IDENTIFICATION
GHS Classification
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.
3. COMPOSITION/INFORMATION ON INGREDIENTS
5. FIREFIGHTING MEASURES
1/5
SAFETY DATA SHEET
Sika® Antisol A4
Revision Date 03.04.2020 Print Date 03.04.2020
Suitable extinguishing media : Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Hazardous combustion prod- : No hazardous combustion products are known
ucts
Methods and materials for : Wipe up with absorbent material (e.g. cloth, fleece).
containment and cleaning up Keep in suitable, closed containers for disposal.
2/5
SAFETY DATA SHEET
Sika® Antisol A4
Revision Date 03.04.2020 Print Date 03.04.2020
Appearance : liquid
Colour : milky, white
Odour : characteristic
Odour Threshold : No data available
Solubility(ies)
Water solubility : soluble
Viscosity
Viscosity, dynamic : ca. 70 mPa.s (20 °C)
3/5
SAFETY DATA SHEET
Sika® Antisol A4
Revision Date 03.04.2020 Print Date 03.04.2020
Acute toxicity
No data available
Skin corrosion/irritation
Not classified based on available information.
Serious eye damage/eye irritation
Not classified based on available information.
Respiratory or skin sensitisation
Skin sensitisation: Not classified based on available information.
Respiratory sensitisation: Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT - single exposure
Not classified based on available information.
STOT - repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor- : There is no data available for this product.
mation
4/5
SAFETY DATA SHEET
Sika® Antisol A4
Revision Date 03.04.2020 Print Date 03.04.2020
Disposal methods
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
International Regulations
UNRTDG
Not regulated as a dangerous good
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Transport in bulk according to IMO instruments
Not applicable for product as supplied.
Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
International Chemical Weapons Convention (CWC) : Not applicable
Schedules of Toxic Chemicals and Precursors
5/5
PRODUCTION FACILITY FOR SINGER BANGLADESH
SBLP1-TOA-MAT-001 Material Proposal for Curing Compound Rev. 0
Appendix C
- MasterKure 107 Product Data Sheet
- MasterKure 185 Product Data Sheet
6
MasterKure® 107
Water based concrete curing compound, white pigmented for solar reflectance
Failure to comply with the recommended storage ® = Registered trademark of the BASF-Group in many countries.
conditions may result in premature deterioration of
the product or packaging. For specific storage
advice consult BASF's Technical Services
Department.
BASF_CC-UAE/Kure_107_12_94/v2/07_15
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.
BASF Construction Chemicals UAE LLC Disclaimer: the LRQA mark relates
P.O. Box 37127, Dubai, UAE to certified management system and
Tel: +971 4 8090800, Fax: +971 4 8851002 not to the product mentioned on this
www.master-builders-solutions.basf.ae datasheet
MasterKure® 185
Acrylic polymer based, multi-role curing, sealing and protective membrane
The technical information and application advice given in this BASF Construction Chemicals publication are based
STATEMENT OF on the present state of our best scientific and practical knowledge. As the information herein is of a general nature,
RESPONSIBILITY no assumption can be made as to a product's suitability for a particular use or application and no warranty as to its
(Disclaimer) accuracy, reliability or completeness either expressed or implied is given other than those required by law. The
user is responsible for checking the suitability of products for their intended use.
® = registered trademark of BASF group in many countries
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF
NOTE Construction Chemicals either orally or in writing may be followed, modified or rejected by the owner, engineer or
contractor since they, and not BASF Construction Chemicals, are responsible for carrying out procedures
appropriate to a specific application.
BASF India Limited
Construction Chemicals Division
Plot.No.12,TTC Area
Thane Belapur Road,Turbhe
Navi Mumbai - 400705,India
Tel: +91 22 67127600, Fax: +91 22 67917358
E-mail: construction-india@basf.com , www.master-builders-solutions.basf.in