Professional Documents
Culture Documents
Moodle2Wordquestions - English Template: (21Me502-Dme-Fa3-S. Madheswaran-16.09.2023)
Moodle2Wordquestions - English Template: (21Me502-Dme-Fa3-S. Madheswaran-16.09.2023)
Moodle2Wordquestions - English Template: (21Me502-Dme-Fa3-S. Madheswaran-16.09.2023)
[21ME502-DME-FA3-S. MADHESWARAN-16.09.2023]
Question 01 (DE)
[200]
Effect of stress concentration cannot be completely eliminated but its effect can be
reduced by slightly altering the geometry of the components. Flow analogy is helpful
in understanding how a particular discontinuity affects the stress distribution around
it and how its effect can be reduced. Observe this factor and answer the followings
DE
Observe the following figure, it is the stepped shaft for machine application. The
stress concentration factor will affect at:________
MC
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Bigger Dia. of the shaft 100
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Ductile material & static loading 0
Brittle material & fluctuate
B. 100
loading
Ductile material & fluctuate
C. 0
loading
D. Brittle material & static loading 0
E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)
Question 05 (MC)
[SO2] [104] [100]
On the beam both ends, bending moment is applied towards upside (As given in
figure.2).
MC
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
Top fibre will be compressed
A. 100
Bottom fibre will be tensed
Top fibre will be tensed Bottom
B. 0
fibre will be compressed
Both top and bottom fibre will be
C. 0
compressed
Both top and bottom fibre will be
D. 0
tensed
E. 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)
Question 06 (MC)
[SO2] [105] [100]
If the hole's width decreases in the direction of the load for an elliptical hole in a flat
plate as given in figure Q6, the Stress Concentration Factor will
MC
Default mark: 2
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Increase 100
B. Decrease 0
A semi-infinite plate having an elliptical hole with ratio of major axis to minor axis ratio
of 2 as shown in the figure. Identify the possible values of the theoretical stress
concentration factor.(Consider Tensile load is applied along the major axis)
Hint:
Default mark: 1
Shuffle the choices? Yes
Number the choices? A
Penalty for each incorrect try: 0
ID number:
# Answers Feedback Grade
A. Kt=2 100
B. Kt=3 0
C. Kt=4 0
D. Kt=5 0
E. Kt=6 0
General feedback:
For any correct response: Your answer is correct.
For any incorrect response: Your answer is incorrect.
Hint 1:
Show the number of correct
No
responses (Hint 1):
Clear incorrect responses (Hint 1): No
Tags:
Allows the selection of a single or multiple responses from a pre-defined list.
(MC/MA)
Question 08 (TF)
[SO3] [107] [100]
Default mark: 1
Answers Feedback Grade
A. True 100
B. False 0
General feedback:
Tags:
Set grade '100' to the correct answer.