The document contains specifications for turning a workpiece that is 100mm in length, 40mm in diameter, and clamped for 15mm. It also provides a CNC turning program using tool T#1 to contour the outside of the workpiece from a diameter of 40mm down to 20mm over the length of the workpiece, leaving a 15mm allowance at one end.
The document contains specifications for turning a workpiece that is 100mm in length, 40mm in diameter, and clamped for 15mm. It also provides a CNC turning program using tool T#1 to contour the outside of the workpiece from a diameter of 40mm down to 20mm over the length of the workpiece, leaving a 15mm allowance at one end.
The document contains specifications for turning a workpiece that is 100mm in length, 40mm in diameter, and clamped for 15mm. It also provides a CNC turning program using tool T#1 to contour the outside of the workpiece from a diameter of 40mm down to 20mm over the length of the workpiece, leaving a 15mm allowance at one end.