Professional Documents
Culture Documents
Lezaj Ulaz 30 MM
Lezaj Ulaz 30 MM
Project Info
Guide
Type of Strength Calculation - Check Calculation
Loads
Bearing radial load Fr 241 N
Bearing axial load Fa 0N
Speed n 1200 rpm
Required static safety factor s0 2.0 ul
Bearing
Designation BS 292: Part 1 (II) - Metric (7006 - 30 x 55 x 13)
Bearing inside diameter d 30.000 mm
Bearing outside diameter D 55.000 mm
Bearing width B 13.000 mm
Nominal contact angle of the bearing α 20 deg
Basic dynamic load rating C 21400 N
Basic static load rating C0 14000 N
Dynamic radial load Factor X 0.60 ul / 0.60 ul
Dynamic axial load Factor Y 0.50 ul / 0.50 ul
Limit value of Fa/Fr e 1.14 ul
Static radial load Factor X0 0.60 ul
Static axial load Factor Y0 0.50 ul
Limiting speed lubrication grease nLim1 0 rpm
Limiting speed lubrication oil nLim2 0 rpm
Lubrication
Friction factor μ 0.0015 ul
Lubrication Oil
Results
file:///C:/Users/KIMI/AppData/Local/Temp/DA/BEARING/BEARING.htm 1/2
12/27/21, 6:45 PM Bearing Component Generator
Summary of Messages
6:45:38 PM : Limiting speed lubrication grease value not found, over-revolving factor can't be calculated.
6:45:38 PM Calculation: Calculation indicates design compliance!
file:///C:/Users/KIMI/AppData/Local/Temp/DA/BEARING/BEARING.htm 2/2