The document is an operating manual that provides information on the operation and setup of a Met30+ 1f system. It includes a chart that shows the system menu options for selecting products, printing reports, clearing counts, and setting up products. The engineering setup menu allows configuring the system, inputs, auxiliary functions, communication settings, and setting supervisor and engineer codes.
The document is an operating manual that provides information on the operation and setup of a Met30+ 1f system. It includes a chart that shows the system menu options for selecting products, printing reports, clearing counts, and setting up products. The engineering setup menu allows configuring the system, inputs, auxiliary functions, communication settings, and setting supervisor and engineer codes.
The document is an operating manual that provides information on the operation and setup of a Met30+ 1f system. It includes a chart that shows the system menu options for selecting products, printing reports, clearing counts, and setting up products. The engineering setup menu allows configuring the system, inputs, auxiliary functions, communication settings, and setting supervisor and engineer codes.
No: Q875-0143/ENG Issue 2 Met 30+ Operating Manual 12/01/10
6. OPERATION CHART 6.1 Met30 + 1f System Menu
SELECT
OR Enter Security Code SELECT «
Product/reject counts Engineering displays
Product setup data Software version Supervisor Menu Operator Menu Machine type Timer parameter [T] Do Sample test Test Syschek time (only if [P] Select Product Product configured) [R] Print reports Print Noise test [C] Clear counts Exit Test Tacho (only if Edit Product Menu [S] Setup product configured) [r] Adjust Reject Timer [E] Edit product name [E] Edit product [W] Product Width [D] Delete product [H] Product Height [o] Operator’s code [P] Product Phase [e] Engineering setup [G] Adjust gain [x] Exit [x] Exit
Engineering Setup Menu
[S] Sample test reminder
Configure System [c] Configure system [v] Vibration setup Inputs [T] Set system clock Syschek [C] Communication setup Communication Aux [P] Printer setup Setup Exit [s] Supervisor’s code [e] Engineer’s code Port A [l] Lock engineering Port B [x] Exit Detector ID Exit
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc Page 30 of 58