Professional Documents
Culture Documents
Preventive Template: PREV-0001406 #
Preventive Template: PREV-0001406 #
Preventive Template: PREV-0001406 #
# PREV-0001406
Plant\Warehouse: DeLaFontaine (Hyattsville) Sender: Samuel Dumas
Equipment/Suite: Receiver: Samuel Dumas
Number: 560MID
Priority: Z07 - Dans la semaine
Description Punch Press ATV 4T Azimuth
# of days 7
Location: Status: À faire
Division: Principale Classification: Préventif/Preventive
Group:
Work:
Component - Tag: GENERAL - 560MID
Code: 101400
08 Entretien mensuel/Monthly maintenance - mécanique
Assignment
W.O. # Department / Resource # / Parallel Time Planned Expense account
Comments (minutes)
PREV-0001406 Maintenance / Mechanic 1 / 0
Comments:
Due date
Type : Frequency
2023-11-01 [44] 2023-12-01 [48] 2024-01-01 [1] 2024-02-01 [5]
2024-03-01 [9]
560MID - Blow - Blow all debries and dust away to make sure it's clean and ready for the maintenance.
560MID - Safety - Make sure you disconnect any power source before continuing the maintenance of this machine.
560MID - Inspection - Remove the guard, and inspect the pulley and belts. Replace parts if needed.
560MID - Inspection - Inspect pneumatic hoses and electric wire. Make sure there is no air leak. Replace/repair part if
dammaged.
560MID - Inspection - Check if any bolts are loose and tightens if needed. (Bolts for the guard, bolts on the bed etc)
560MID - Lubricate - If the machine has an FRL (Filter Regulator Lubricator), check the oil level in the small tank.
-Add pneumatic Oil if needed. (Shell Tellus S2-M-32 or equivalent)
-Remove water in the air filter if needed.
560MID - Inspection - Check if any cracks or loose bushings are present on the machine. If yes, advise your supervisor.
(Visual Inspection)
560MID - Lubricate - Fill the crankshaft bearing and big end oil reservoirs with Shell Tellus 46 oil or equivalent.
560MID - Inspection - Make sure the tooling is not broken and in good condition.
560MID - Lubricate - Lubricate the "Dog" with Shell Tellus S2-M-32 oil or equivalent.
# PREV-0001406
560MID - Test - Test 5-6 cycles of the mechanical press by pressing the pedal. This is to make sure it's safe for operation and
ready to go.
Tools