Professional Documents
Culture Documents
Computer Networks New
Computer Networks New
Computer Networks New
Download KG App
Q1. A link has transmission speed of 10^6 bits/sec. It uses data packets of size 1000 bytes
each. Assume that the acknowledgement has negligible transmission delay, and that its
propagation delay is the same as the data propagation delay. Also assume that the
processing delays at nodes are negligible. The efficiency of the stop-and-wait protocol in
this setup is exactly 25%. The value of the one way propagation delay (in milliseconds)
is_____.
A. 12ms
B. 10ms
C. 14ms
D. 16ms
Q2. In Ethernet when Manchester encoding is used, the bit rate is:
A. Half the baud rate
B. Twice the baud rate
C. Same as the baud rate
D. None of the above
Q4. Consider two hosts X and Y, connected by a single direct link of rate 10^6 bits/sec.
The distance between the two hosts is 10000 km and the propagation speed along the
link is 2 * 10^8 m/sec. Host X sends a file of 50000 bytes as one large message to host Y
continuously. Let the transmission and propagation delays be p milliseconds and q
milliseconds respectively. Then the value of and are
A. p=50 and q=100
B. p=50 and q=400
C. p=100 and q=50
D. p=400 and q=50
Q5. In a data link protocol, the frame delimiter flag is given by 0111. Assuming that bit
stuffing is employed, the transmitter sends the data sequence 01110110 as
A. 01101011
B. 011010110
C. 011101100
D. 0110101100
Q6. A TCP message consisting of 2100 bytes is passed to IP for delivery across two
networks. The first network can carry a maximum payload of 1200 bytes per frame and
the second network can carry a maximum payload of 400 bytes per frame, excluding
network overhead. Assume that IP overhead per packet is 20 bytes. What is the total IP
overhead in the second network for this transmission?
Q7. A channel has a bit rate of 4 kbps and one-way propagation delay of 20 ms. The
channel uses stop and wait protocol. The transmission time of the acknowledgement
frame is negligible. To get a channel efficiency of at least 50%, the minimum frame size
should be
A. 80 bytes
B. 80 bits
C. 160 bytes
D. 160 bits
Q8. A link of capacity 100 Mbps is carrying traffic from a number of sources. Each source
generates an on-off traffic stream; when the source is on, the rate of traffic is 10 Mbps,
and when the source is off, the rate of traffic is zero. The duty cycle, which is the ratio of
on-time to off-time, is 1 : 2. When there is no buffer at the link, the minimum number of
sources that can be multiplexed on the link so that link capacity is not wasted and no data
loss occurs is S1. Assuming that all sources are synchronized and that the link is provided
with a large buffer, the maximum number of sources that can be multiplexed so that no
data loss occurs is S2. The values of S1 and S2 are, respectively
A. 10 and 30
B. 12 and 25
C. 5 and 33
D. 15 and 22
KGYT
on