Professional Documents
Culture Documents
Ppce Iat Set - I Mech 2023
Ppce Iat Set - I Mech 2023
no:
DHANALAKSHMI SRINIVASAN
COLLEGE OF ENGINEERING
COIMBATORE
2 CO2
5. What is CAPP? K2
(OR)
6.B Explain the list the information required for process planning 13 CO1 K1
7.A What is inspection? Write briefly about the different methods of inspection 13
CO2 K2
followed in industries.
(OR)
7.B Explain the factors to be considered in selection of process parameters.
CO2 K2
13
(OR)
8.B Following are the information on two machines. CO1 K2
Find the break even quantity for a job which can be produced on either of the machines. 14
Also comment about the choice of machine based on break-even quantity.
S.No Item Capstan Lathe Automatic (Single
Spindle)
1. Tooling cost Rs.300 Rs.300
2. Cost of cams - Rs.1500
3. Material cost per Rs.2.50 Rs.2.50
piece
4. Operating labour Rs.20 per hour Rs.80 per hour
cost
5. Cycle time per 5 min 1 min
piece
6. Setting up labour Rs.20/Hour Rs.20/Hour
cost
7. Setting up time 1 Hour 8 Hour
8. Machine overheads 300% of (4) 1000% of (4)
(Setting and
Operation)
Prepared by Verified By
R.ARUL HoD
AP/MECH