Professional Documents
Culture Documents
1 (Arrastados) 4
1 (Arrastados) 4
1 (Arrastados) 4
The easiest way to get to know the system and get it up and running quickly is to get all the
devices and accessories programmed on a table top before locating and mounting them.
Yale
R
Fixing
Yale
R screws X 4
Internal cover
screws X 4 OFF
ON
Power
switch Battery
Compartment
Learn button 4 X D cells
1 2 3 ON
4
Programming
Siren switch
The siren comes in two shapes, square shaped
and round depending on the kit purchased. The
operation and programming of the sirens are
identical, only the case is different.
WARNING
The siren is very loud, be prepared! Take care not to
activate the siren tamper switch unnecessarily.
(switch 1).
Clear 1 Pull out the plastic pull tab on the back of the PIR.
4 Switch the power switch to on and This will activate the batteries.
1 2 3 4
to side with one short beep. 2 A red light can be seen flashing through the
Normal Master
lens. This will last for 30 seconds indicating the
5 Move the Clear switch to the Off position. component’s initiation.
Status
LED
Learn/Test
Button Cover screw