Professional Documents
Culture Documents
01labwork Lab Report Jupri
01labwork Lab Report Jupri
01labwork Lab Report Jupri
SESI 1_2022/2023
CLO1:
Construct building models using techniques, resources and BIM tools for basic
modelling correctly. (P3,PLO5)
General:
1. Duplicate elevation line under Elevation (Building Elevation) – East using ‘Copy’
interface on Modify I Levels after selecting an elevation line.
2. Rename each level as in Figure 1 (Labwork 1) and set the height of each level at
3300mm (except Ground Level to Foundation Level is 500mm).
Task 3
Using the same project file created, you will need to:
● Reproduce the Vertical and Horizontal gridlines with dimension as shown in
Figure 2. Ensure that grid line 1 and A are intersecting at Project Base Point and
pin the gridlines. *Note: All dimensions are 4mm text size
2. Using Grid interface on Structure Tab, create Vertical and Horizontal gridlines
labelled as grid line 1 and A intersecting at Project Base Point.
3. Reproduce the Vertical and Horizontal gridlines as shown in Figure 2
(Labwork 1).