The document discusses surface coatings for outdoor metal products. It describes that OBO offers hot-dip galvanization and double-dip galvanization, which provide corrosion protection for outdoor and wet environments. Hot-dip galvanization involves dipping metal in molten zinc, resulting in a coating thickness of 40-60 micrometers. Double-dip galvanization provides an additional zinc-aluminum layer of approximately 23 micrometers, protecting joints from corrosion up to 2.0 millimeters thick. The coatings can be applied to products such as cable trays, supports, and covers.
The document discusses surface coatings for outdoor metal products. It describes that OBO offers hot-dip galvanization and double-dip galvanization, which provide corrosion protection for outdoor and wet environments. Hot-dip galvanization involves dipping metal in molten zinc, resulting in a coating thickness of 40-60 micrometers. Double-dip galvanization provides an additional zinc-aluminum layer of approximately 23 micrometers, protecting joints from corrosion up to 2.0 millimeters thick. The coatings can be applied to products such as cable trays, supports, and covers.
The document discusses surface coatings for outdoor metal products. It describes that OBO offers hot-dip galvanization and double-dip galvanization, which provide corrosion protection for outdoor and wet environments. Hot-dip galvanization involves dipping metal in molten zinc, resulting in a coating thickness of 40-60 micrometers. Double-dip galvanization provides an additional zinc-aluminum layer of approximately 23 micrometers, protecting joints from corrosion up to 2.0 millimeters thick. The coatings can be applied to products such as cable trays, supports, and covers.
The document discusses surface coatings for outdoor metal products. It describes that OBO offers hot-dip galvanization and double-dip galvanization, which provide corrosion protection for outdoor and wet environments. Hot-dip galvanization involves dipping metal in molten zinc, resulting in a coating thickness of 40-60 micrometers. Double-dip galvanization provides an additional zinc-aluminum layer of approximately 23 micrometers, protecting joints from corrosion up to 2.0 millimeters thick. The coatings can be applied to products such as cable trays, supports, and covers.
Outdoor use Hot-dip galvanisation Double-dip galvanisation
OBO can offer versions with hot- • Hot galvanisation using the dip- • Hot dipping with zinc-aluminium dip galvanisation and double-dip ping method according to DIN coating in accordance with DIN galvanisation for outdoor and wet - EN ISO 1461 EN 10346 room use. • Coating thickness to DIN EN • Average coating thickness ap- ISO 1461 approx. 40–60 μm prox. 23 μm • Any interfaces added at a later • Joints in the metal are protected date must also be galvanised to by cathodic corrosion protection protect against corrosion up to a thickness of 2.0 mm Components: Sheet steel products Components: Metal products such such as cable trays and welded as covers, barrier strips and components such as supports and punched parts brackets.