Professional Documents
Culture Documents
How To Calculate Pon Bandwidth Value For
How To Calculate Pon Bandwidth Value For
How To Calculate Pon Bandwidth Value For
2, if the customer has any doubt about the residual bandwidth command displays
the value, how to manually calculate the remaining bandwidth for MA5600T?
Answer:
1, “Left guaranteed bandwidth (kbps):” the remaining bandwidth PON ports, which are
not currently allocated bandwidth, bandwidth for a host of calculated values. This
value with the addition of ONT allocated bandwidth is directly related to size, after the
addition of ONT minus the corresponding bandwidth. Can be understood as a static
value.
2,
1) to manual calculation PON export surplus bandwidth, need to know the following
information:
——————————————————–
F/S/P 0/1/0
Number of T-CONTs 12
Autofind Enable
Laser switch On
——————————————————–
The command line to display the PON export surplus bandwidth is 1164032kbps;
There are four ONT the PON port. ONT 1 has three business TCONT, respectively, using
the DBA template of 10, 10 and 20; ONT 2, two TCONT, 10 DBA templates are used; ONT
3 has two business TCONT, are using template DBA 10; ONT 4 there is a business of
TCONT, use the DBA template 10.
Protocol defined in the uplink bandwidth Max: 1244160 kbit/s =19440 bytes;
The Huawei OLT emergency PLOAM message bandwidth reservation: (52 * 64) kbit/s
= 52 bytes
ONT 2 bandwidth:
ONT 3 bandwidth:
ONT 4 bandwidth:
18188 bytes * 64 kbit/s = 1164032 Kbps, consistent with the command line to check to
see the results.
4) note that each ONT will have a default TCONT 0, use the default template
DBA 1 (80bytes), for the transmission of ONT management message OMCI. The
TCONT cannot be deleted, but can be modified. ONT currently supports the
minimum bandwidth is 1M, the new HG824X may support to smaller.