Mechanics of Fluids Si Edition 5th Edition Potter Test Bank

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Mechanics of Fluids SI Edition 5th

Edition Potter Test Bank


Visit to download the full and correct content document: https://testbankdeal.com/dow
nload/mechanics-of-fluids-si-edition-5th-edition-potter-test-bank/
Mechanics of Fluids Chapter 6: Dimensional Analysis and Similitude

Solutions for Sections 6.1 – 6.3


1. The variables length l, gravity g, velocity V, and density ρ can be combined into the
dimensionless term:
(C) V 2 /lg
The dimensions on each of the variables are
L L M
[l] = L, [ g] = , [V ] = , [ρ ] =
T2 T L3

The density ρ is the only variable with M so it cannot enter the term since M is not
able to be canceled out. Time T can be canceled by forming the ratio V2/g. That ratio
leaves L in the numerator. If l is placed in the denominator, the term, called a π-term,
is dimensionless:

V2
π=
lg

2. It is supposed that the power P needed to propel a large dirigible depends on the speed V,
diameter, D, length L, kinematic viscosity ν, and density ρ. The relationship between these
variables can be expressed as:
P ⎛ l ν ⎞
(D) = f⎜ , ⎟
ρV D
3 2
⎝ D VL ⎠
The dimensions on the variables are

ML2 L L2 M
[ P] = , [V ] = , [ D ] = L, [ l ] = L, [ν ] = , [ρ] =
T3 T T L3
First, select the repeating variables, equal in number to the number of dimensions and
containing all dimensions in the problem. Let’s select V, D, and ρ. Create the π-terms
by combining with each of the remaining variables, one at a time (cancel dimensions
as in Problem 1):
P l ν
π1 = , π2 = , π3 =
ρ V 3D2 D VL

The π-terms are then related by

P ⎛ l ν ⎞
= f⎜ , ⎟
ρV D
3 2
⎝ D VL ⎠

43
© 2017 Cengage Learning®. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.
Mechanics of Fluids, 4th Edition Chapter 6: Dimensional Analysis and Similitude

3. Wind blowing over the cables of a bridge sheds alternating vortices resulting in oscillating
forces acting on the cables. Which of the major parameters listed in Eq. 6.2.17 are the primary
parameters which would be used in the description of this situation?
(A) Re and St
The shedding of the vortices would involve a shedding frequency leading to the
Strouhal number. The force of the wind on a cable would depend on the Reynolds
number. The flow would not be compressible so the Mach number would not enter.
Gravity would also not enter the problem so the Froude number would not enter.

44
© 2017 Cengage Learning®. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.

You might also like