Professional Documents
Culture Documents
Infosheet Ir Heat Sensor D1190-2
Infosheet Ir Heat Sensor D1190-2
Specification
Diameter: 95mm (Heating Element)
Patols Infrared heat wand is used to test and commission the CAUTION: Hot surfaces, avoid contact with metal cage
whilst the unit is in operation.
5000 series sensors. The wand uses a rapid controllable thermal
DO NOT unplug by pulling on the cord. To unplug,
energy that provides no visible sign of heat, by producing black grasp the plug, not the cord.
body Infrared emissions.
The Patol wand is passed underneath the detectors field of view Ordering Information
triggering an alarm. It comes complete with a metal cage to Description Part Number
protect users, and surfaces. Infrared Heat Test Wand 721-002
Used with the following detectors:
250mm Dia. 100mm Dia. 50mm Dia. The chart (left) indicates the 5410: Polycarbonate detector with air 710-007 / 710-009
490 sq cm 78 sq cm 19.6 sq cm
correlation between the
4 temperature and size of ‘hot purge blower
spot’ anomalies for a typical
3
29mm Dia.
6.45 sq cm 5000 series installation to 5010: Aluminium detector with air 710-002 / 710-003
1 sq inch
produce one or more detector purge blower.
2
channel activations at various
trigger level settings. 5011: Aluminium detector, with 710-005
1 Exact response is dependant compressed air purging.
25mm Dia. on the emissivity factor of the 5012: Stainless Steel detector with 710-006
4.9 sq cm
monitored material, sensor
0 100 200 300 400 500 600 700 800 900 1000
orientation and target speed. Compressed air purging
Temperature Degrees C GLOWING / VISIBLE
Patol Limited, Rectory Road, Padworth Common, Reading, Berkshire, RG7 4JD Tel: +44 (0)1189 701 701 Email: Info@Patol.co.uk D1190-2