Professional Documents
Culture Documents
حل اسئلة هوائيات
حل اسئلة هوائيات
حل اسئلة هوائيات
1 - Define the SWR, if the value of SWR equal to 1, what is the expectation the value of
reflected signal, and what is the name of this system?
The Standing Wave Ratio (SWR) is a measure of how well the transmit power signal is traveling through
the antenna system. It is the ratio of the maximum amplitude of the standing wave to the minimum
amplitude, indicating the efficiency of power transfer.
If the value of SWR is equal to 1, it signifies a perfectly matched system. In this ideal scenario, there is no
reflected signal; all the power is effectively transmitted without any loss or reflection back into the
transmission line. This condition is known as a "matched system" or "perfectly matched load," where the
impedance of the transmission line matches that of the load (antenna), resulting in optimal power transfer.
2.From your results, determine the maximum and minimum value of SWR, is this value
through the range of work?
• Maximum SWR: This value indicates the highest ratio of standing waves in the
transmission line. It typically occurs when there's a mismatch between the antenna and
the transmission line, leading to increased reflection of the signal.
• Minimum SWR: This value represents the lowest ratio of standing waves, suggesting an
optimal match between the load (antenna) and the transmission line. In this case, power is
efficiently transferred with minimal reflection.
A lower reflection coefficient associated with the lowest SWR indicates a better-matched system with less
signal reflection. This is desirable for efficient power transmission in the antenna system