Professional Documents
Culture Documents
Sony - dsc-s2100 - Ver1.2 - l2 - Service Manual
Sony - dsc-s2100 - Ver1.2 - l2 - Service Manual
Sony - dsc-s2100 - Ver1.2 - l2 - Service Manual
985275013.pdf
Revision History
SERVICE MANUAL
S.M. Rev.
Ver. Date History Contents
issued
1.0 2010.01 Official Release — —
1.1 2010.03 Revised-1 • Addition of SPECIFICATIONS. Yes
(A1 09-475) S.M. Revised: Page 2
Ver. 1.2 2010.04 US Model • Addition of Model information table.
Canadian Model S.M. Revised: Page 3
• Addition and correction of REPAIR PARTS LIST.
AEP Model S.M. Revised: Page 2-1, 2-3, 2-4, 2-5
Internal memory UK Model • Addition of Accessories and ASSEMBLY.
ON BOARD S.M. Revised: Page 3-1
E Model 1.2 2010.04 Revised-2 • Addition of REPAIR PARTS LIST. Yes
Australian Model (A2 10-017) S.M. Revised: Page 2-1, 2-3, 2-5, 3-1
Photo: DSC-S2000/Silver
SPECIFICATIONS
[System] [Input and Output connectors]
Image device: USB communication: Hi-Speed USB
DSC-S2100: 7.79 mm (1/2.3 type) (USB 2.0 compliant)
R, G, B primary color mosaic filters
DSC-S1900/S2000: 7.70 mm (1/2.3 type) [LCD screen]
R, G, B primary color mosaic filters LCD panel:
Total pixel number of camera: DSC-S2100: 7.5 cm (3.0 type)
DSC-S2100: Approx. 12.4 Megapixels DSC-S1900/S2000: 6.2 cm (2.5 type)
DSC-S1900/S2000: Approx. 10.3 Megapixels TFT drive
Effective pixel number of camera: Total number of dots: 230 400 (960 × 240) dots
DSC-S2100: Approx. 12.1 Megapixels
DSC-S1900/S2000: Approx. 10.1 Megapixels [Power, general]
Lens: 3× zoom lens Power: LR6 (size AA) Alkaline batteries (2), 3 V
f = 6.2 mm – 18.6 mm (35 mm – 105 mm HR15/51:HR6 (size AA) Nickel-Metal
(35 mm film equivalent)) Hydride batteries (2) (sold separately), 2.4 V
F3.1 (W) – F5.6 (T) ZR6 (size AA) Oxy Nickel Primary Battery (2)
Exposure control: Automatic exposure, (sold separately), 3 V
Scene Selection (8 modes)
Power consumption (during shooting): 1.0 W
White balance: Automatic, Daylight, Cloudy,
Operating temperature: 0°C to 40°C
Fluorescent 1/2/3, Incandescent, Flash
(32°F to 104°F)
Recording interval for Burst mode: Storage temperature: – 20°C to + 60°C
Approx. 1 second (– 4°F to + 140°F)
File format: Dimensions:
Still images: JPEG (DCF Ver. 2.0, 97.6 × 61.0 × 27.2 mm
Exif Ver. 2.21, MPF Baseline) (3 7/8 × 2 1/2 × 1 1/8 inches)
compliant, DPOF compatible
(W/H/D, excluding protrusions)
Movies: AVI (Motion JPEG)
Mass:
Recording media: Internal Memory (approx. 6 MB), DSC-S2100: Approx. 184 g (6.5 oz)
“Memory Stick Duo” media, SD memory card, DSC-S1900/S2000: Approx. 173 g (6.1 oz)
SDHC memory card (including two batteries and memory card)
Flash: Flash range (ISO sensitivity Microphone: Monaural
(Recommended exposure Index) set to Auto): Buzzer
set to Auto): Exif Print: Compatible
Approx. 0.5 m to 3.3 m PRINT Image Matching III: Compatible
(1 feet 7 3/4 inches to 10 feet 10 inches) PictBridge: Compatible
(W) /
approx. 0.5 m to 1.8 m Design and specifications are subject to
(1 feet 7 3/4 inches to 5 feet 10 7/8 inches) change without notice.
(T)
DSC-S1900/S2000/S2100
–2–
Ver.1.1 2010.03
The changed portions from
Ver.1.0 are shown in blue.
• Abbreviation
AUS : Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
KR : Korea model
DSC-S1900/S2000/S2100
–3–
SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO- CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SONY. SUPPLÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes and Boards requiring use of unleaded solder are printed with the leadfree
bridges. mark (LF) indicating the solder contains no lead.
2. Check the interboard wiring to ensure that no wires are “pinched” (Caution: Some printed circuit boards may not come printed with the
or contact high-wattage resistors. lead free mark due to their particular size.)
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement. : LEAD FREE MARK
4. Look for parts which, through functioning, show obvious signs of Unleaded solder has the following characteristics.
deterioration. Point them out to the customer and recommend their • Unleaded solder melts at a temperature about 40°C higher than ordi-
replacement. nary solder.
5. Check the B+ voltage to see it is at the values specified. Ordinary soldering irons can be used but the iron tip has to be applied
6. Flexible Circuit Board Repairing to the solder joint for a slightly longer time.
• Keep the temperature of the soldering iron around 270°C during Soldering irons using a temperature regulator should be set to about
repairing. 350°C.
• Do not touch the soldering iron on the same conductor of the circuit Caution: The printed pattern (copper foil) may peel away if the heated
board (within 3 times). tip is applied for too long, so be careful!
• Be careful not to apply force on the conductor when soldering or • Strong viscosity
unsoldering. Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as
on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be
added to ordinary solder.
DSC-S1900/S2000/S2100
–4–
1. SERVICE NOTE
1-1. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY 1-2. REGARDING FUSE
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) • MAIN BOARD
Note1: When replacing main board, erase the data in internal memory of the board before replacement. Ref.NO: F1
Note2: When replacing main board, execute formatting and initialize the internal memory after replacement.
Part NO: 1-576-363-11
Description: FUSE, MICRO (1005 TYPE) (1A/30V)
Method for Copying the Data in Internal Memory
Ref.NO: F2
Copy Part NO: 1-576-913-31
Description: FUSE, MICRO (1608 TYPE) (1.6A/36V)
Copies all images in the internal memory to a memory card.
1 Insert a memory card with sufficient free capacity into the camera.
2 MENU t (Settings) t (Memory Card Tool) t [Copy] t [OK]
t z on the control button
Notes
• Use the batteries with enough power remaining. If you attempt to copy image files using batteries with
little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data.
• Images cannot be copied individually.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the memory card after copying, then format the internal memory ([Format] in
[Internal Memory Tool]).
• A new folder is created on the memory card and all the data will be copied to it. Yo u cannot choose a
specific folder and copy images to it.
Format
Formats the memory card or the internal memory. To ensure stable operations of the memory
card, we recommend that you use this camera to format any memory card being used with this
camera for the first time. Note that formatting will erase all data recorded on the memory card.
This data cannot be restored. Be sure to back-up any important data to a PC or other storage
location.
DSC-S1900/S2000/S2100
1-1E
Ver.1.2 2010.04
The changed portions from 2. REPAIR PARTS LIST
Ver.1.1 are shown in blue.
IDENTIFYING PARTS
(ENGLISH)
Follow the disassembly in the numerical order given. NOTE:
When indicating parts by reference
• -XX, -X mean standardized parts, so they may have some differences from the original one.
number,please include the board name.
• Items marked “*” are not stocked since they are seldom required for routine service. Some
delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied. The components identified by mark 0 or
• Due to standardization, replacements in the parts list may be different from the parts speci- dotted line with mark are critical for safety.
fied in the diagrams or the components used on the set. Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
Note: The procedures 3 and 0 are not necessary for DSC-S1900.
The procedure 0 is not necessary for DSC-S2000.
The procedure 3 is not necessary for DSC-S2100. • Color Indication of Appearance Parts
Example:
(SILVER) : Cabinet’s Color
6 TOP Cover Assy
(Silver) : Parts Color
9 SW Board
qa Main Board
DSC-S1900/S2000/S2100
2-1
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of Cut and remove the part of gilt
bent at the terminal. which comes off at the point.
Do not insert the cable insufficiently nor crookedly. (Be careful or some
pieces of gilt may be left inside)
• When remove a connector, don’t pull at wire of connector. It is pos-
sible that a wire is snapped.
R:1 k /1 W
Preparing the Short Jig (Part code: 1-215-869-11)
To preparing the short jig, a small clip is attached to each end of
a resistor of 1 kΩ /1 W (1-215-869-11).
Wrap insulating tape fully around the leads of the resistor to Protection
prevent electrical shock. Sheet
Remove
Stroboscope
Block Assy
DSC-S1900/S2000/S2100
2-2
Ver.1.2 2010.04
The changed portions from
Ver.1.1 are shown in blue.
1(Claw) #S3
#S2
#S4
2
(Note2) 1�5
4
4�3 #S2
#S4 #S3
(Note2)
#S3 S2100 4 LCD Module Raise (4) → #S3 X 3
Back View
2(Claw)
DSC-S2100
2
Main Frame Section
(See Page 2-4) #S3
#S3
#S2
2�1 #S4
(Note2) Note
Ref. No. Part No. Description Ref. No. Part No. Description Note1: Please refer to “THE COMBINATION OF CABINET’S COLOR Note2: Please refer to “THE COMBINATION OF CABINET’S COLOR
1 X-2546-381-1 CABINET (FRONT) ASSY (S) (S2000:SILVER) 5 X-2546-386-1 CABINET (REAR) ASSY (S) (S2000:SILVER) AND SCREW (S2000)” on page 2-1 about the combination AND SCREW (S2100)” on page 2-1 about the combination
1 X-2546-382-1 CABINET (FRONT) ASSY (B) (S2000:BLACK) cabinet’s color and screw. cabinet’s color and screw.
1 X-2546-383-1 CABINET (FRONT) ASSY (S) (S2100:SILVER) 5 X-2546-387-1 CABINET (REAR) ASSY (B) (S2000:BLACK)
1 X-2546-384-1 CABINET (FRONT) ASSY (O) (S2100:ORANGE) 5 X-2546-388-1 CABINET (REAR) ASSY (S) (S2100:SILVER)
1 X-2546-385-1 CABINET (FRONT) ASSY (B) (S2100:BLACK) 5 X-2546-389-1 CABINET (REAR) ASSY (O) (S2100:ORANGE)
5 X-2546-390-1 CABINET (REAR) ASSY (B) (S2100:BLACK)
1 X-2548-225-1 CABINET (FRONT) ASSY (S) (S1900) 5 X-2548-226-1 CABINET (REAR) ASSY (S) (S1900)
1 X-2548-642-1 CABINET (FRONT) ASSY (P) (S2000:PINK)
2 4-173-837-01 DOOR (S), DC (S2000:SILVER) 5 X-2548-643-1 CABINET (REAR) ASSY (P) (S2000:PINK)
2 4-173-838-01 DOOR (B), DC (S2000:BLACK)
2 4-193-830-01 DC DOOR (P) (S2000:PINK) #S2 3-287-027-01 SCREW_TP_1.7_4_A_0.3_ (Note1, 2)
#S3 4-137-871-01 SCREW_TP_1.4_3.5_A0.3_D2.5_N
3 4-173-835-01 BRACKET, LCD (EXCEPT S2100) #S4 4-174-629-01 SCREW_TP_1.7_4_A_0.3_BLK (EXCEPT S1900)
3 4-173-836-01 BRACKET, LCD (S2100) (Note1, 2)
4 1-811-106-11 LCD MODULE (S2100) #S5 3-113-001-01 SCREW TP 1.4*2.5
4 1-811-107-11 LCD MODULE (EXCEPT S2100)
DSC-S1900/S2000/S2100
2-3
Ver.1.1 2010.03
The changed portions from
Ver.1.0 are shown in blue.
6 #S5 X 4
#S5
#S5
DSC-S1900/S2000
#S5
6 52
9�54 9
#S5 ns
7 ns
9�54 #S1 #S1
9
8�51 ns
#S3
ns
53
B
#S1
#S3 9 / 0 / qa Black Mylar Remove (9) → #S3 X 4
Back View
A
B
ns
DSC- #S3
S2100 A
F1 56
0�58 F2
Solder
Solder qa�55 Note
57 (Note)
Note: Refer to “Assembly-1” when you assemble Routing harness
of Main Frame Sub Assy.
Lens Section
(See Page 2-5)
Ref. No. Part No. Description Ref. No. Part No. Description
51 A-1759-672-A STROBOSCOPE BLOCK ASSY 57 1-858-372-11 BUZZER, PIEZOELECTRIC
52 X-2546-391-1 COVER ASSY, TOP (S2000) 58 4-173-839-01 DOOR (S), DC (S2100:SILVER)
52 X-2546-392-1 COVER ASSY, TOP (S2100) 58 4-173-840-01 DOOR (O), DC (S2100:ORANGE)
52 X-2548-227-1 TOP COVER ASSY (S1900) 58 4-173-844-01 DOOR (B), DC (S2100:BLACK)
53 1-822-837-21 CARD CONNECTOR
0 F1 1-576-363-11 FUSE, MICRO (1005 TYPE) (1A/30V)
54 A-1759-673-A SW BOARD, COMPLETE (S2100) 0 F2 1-576-913-31 FUSE, MICRO (1608 TYPE) (1.6A/36V)
54 A-1760-418-A SW BOARD, COMPLETE (EXCEPT S2100)
55 A-1759-674-A MAIN BOARD, COMPLETE (S2000) (Note) #S1 3-288-943-01 SCREW_TP_1.4_3_A_0.2_D=2.5
55 A-1759-675-A MAIN BOARD, COMPLETE (S2100) (Note) #S3 4-137-871-01 SCREW_TP_1.4_3.5_A0.3_D2.5_N
55 A-1778-310-A MAIN BOARD, COMPLETE (S1900) (Note) #S5 3-113-001-01 SCREW TP 1.4*2.5
qs #S3 X 3
Back View
#S3
105
Note
(CCD Assy)
104 (Note) Note: Be careful about the Lens Block Assy.
ns
ns #S1
qs�102 (Note)
Don't press
Don't press the
the AF motor
Sensor holder
Keep clean
Be careful of the weld
these Pins
Ref. No. Part No. Description Ref. No. Part No. Description
101 X-2546-393-1 FRAME SUB ASSY (S), MAIN (S2000:SILVER) 103 4-151-712-01 FILTER ASSY, LOW PASS
101 X-2546-394-1 FRAME SUB ASSY (B), MAIN (S2000:BLACK) 104 A-1759-685-A CCD BLOCK ASSY (EXCEPT S2100) (Note)
101 X-2546-395-1 FRAME SUB ASSY (S), MAIN (S2100:SILVER)
101 X-2546-396-1 FRAME SUB ASSY (O), MAIN (S2100:ORANGE) 104 A-1759-686-A CCD BLOCK ASSY (S2100) (Note)
101 X-2546-397-1 FRAME SUB ASSY (B), MAIN (S2100:BLACK) 105 4-173-845-01 SHEET, CCD MYLAR
101 X-2548-228-1 MAIN FRAME SUB ASSY(S) (S1900) #S1 3-288-943-01 SCREW_TP_1.4_3_A_0.2_D=2.5
101 X-2548-644-1 MAIN FRAME SUB ASSY (P) (S2000:PINK) #S3 4-137-871-01 SCREW_TP_1.4_3.5_A0.3_D2.5_N
102 A-1759-676-A LENS BLOCK ASSY (Note)
DSC-S1900/S2000/S2100
2-5
Ver.1.2 2010.04
The changed portions from 3. ASSEMBLY
Ver.1.1 are shown in blue.
Instruction Manual
・ (Only for destination Japanese model)
英語・韓国語・中国語のみ部品供給可能です。
DSC-S1900
∗ 4-188-082-11 (ENGLISH)
∗ 4-188-082-21 (SPANISH)
LR6 (size AA) alkaline batteries ∗ 4-188-082-31 (RUSSIAN,UKRAINIAN)
(Note) ∗ 4-188-082-41 (TURKISH)
DSC-S2000/S2100
4-170-175-11 (SIMPLIFIED CHINESE)
4-170-176-11 (ENGLISH)
Main Board Main Frame Sub Assy
∗ 4-170-176-21 (ENGLISH,SPANISH)
∗ 4-170-176-31 (ENGLISH,FRENCH)
∗ 4-170-176-41 (ENGLISH,RUSSIAN,UKRAINIAN)
∗ 4-170-176-51 (ENGLISH,FRENCH,ITALIAN,SPANISH,PORTUGUESE,
GERMAN,DUTCH,TURKISH,GREEK,POLISH,CZECH, DSC-S2100 BATT-1 BATT+1
HUNGARIAN,SLOVAK,SWEDISH,FINNISH,NORWEGIAN,
Dedicated USB cable DANISH,CROATIAN,ROMANIAN)
1-834-311-51 ∗ 4-170-176-61 (ENGLISH,TRADITIONAL CHINESE,SIMPLIFIED CHINESE,
MALAY,INDONESIAN,THAI,ARABIC,PERSIAN)
∗ 4-170-176-71 (ENGLISH,SPANISH,PORTUGUESE)
∗ 4-170-176-81 (ENGLISH,TRADITIONAL CHINESE,SIMPLIFIED CHINESE,
INDONESIAN,ARABIC,PERSIAN)
4-170-177-21 (KOREAN)
DSC-S1900/S2000/S2100
3-1E
4. BLOCK DIAGRAM
+1.8VD LCD_HD
+1.8VD LCD_HD LCD_MCLK LCD_HD
+14V BL_ON LCD_MCLK LCD[0..7] LCD_MCLK
+13V +14V BL_ON BL_ON LCD[0..7] LCD_SEN LCD[0..7] DGND
+13V
LED+
LED+ LCD_SEN
LCD_SCK
LCD_SCK LCD_SEN
LCD_SCK
DGND LCD
-7.5V LED- LCD_SDA LED+
-7.5V LED- LCD_SDA LCD_SDA LED+ LED-
DGND LED-
DGND +3.1V_AFE2
LCD
POWER DSP
DSC-S1900/S2000/S2100
4-1E