Professional Documents
Culture Documents
Patrón Aura Corset
Patrón Aura Corset
Patrón Aura Corset
2 INCH
TEST
SQUARE
1 2 Aura PATTERNS
FRONT PANEL 2
CUT 4
3
Aura
PATTE
RNS
FRONT
PANEL
4
CUT 4
Aura
XL L M S XS
PATTERNS XS
FRONT PANEL 3
XL L M S XS
S
CUT 4
Aura
M
L
PATTERNS
XL
4 5 6
BACK PANEL 1
CUT 4
XS
S
M
Aura
PATTERN
S
L
BACK PAN
XL EL 2
Aura PATTERNS
XL L M S XS
CUT 4
FRONT PANEL 1
CUT 2
7 8
XS
XL
2 INCH
TEST
SQUARE
Fabric Suggestions
It is recommended to use a comfortable woven fabric that can
hold it’s shape. Any type of jacquard, cotton, linen, satin fabric
would be suitable.
Fabric Requirements
You will need 2 meters / 2.3 yards of fabric which includes the lining.
Sizing
Pieces to Cut
x2 front panel 1 (x1 lining and x1 main)
x4 front panel 2 (x2 lining and x2 main)
x4 front panel 3 (x2 lining and x2 main)
x4 front panel 4 (x2 lining and x2 main)
x4 back panel 1 (x2 lining and x2 main)
x4 back panel 2 (x2 lining and x2 main)
This is how to align the front and back pieces
Step 2 - With right sides facing, pin and sew all the
bodice seams together using a 1/2” seam allowance.
You should have one long bodice where the last back
seam is left free. Do this for the lining and main fabric.
Step 3 - With right sides facing, pin and sew the lining to
the bodice fabric using a 1/2” seam allowance, around
the armholes, neckline, and the back seam. Clip and
pull/turn the whole top to the right side.
Step 4 - With right sides together, place the front and back together and
sew the shoulder seam using a 1/2” seam allowance and finish the seam.
Step 5 - Make panels and insert boning or zip ties. I have shown this on
one seam here but you need to repeat for all seams. To make panels
you will sew two parallel stitches at either end of the seams. Cut the
boning so it’s slightly shorter than the hem of the top and insert. Once
you’ve completed all the seams, use bias binding to finish the raw edge
of the hem of the top.
Step 7 - Attach grommets into the back of the top and thread ribbon
through to make the closure.