Professional Documents
Culture Documents
Interior Equipment
Interior Equipment
Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:11
9:47:05 AM Page 1 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Take off plastic caps -1- and loosen the fastening screws -2- of the scuff plate -3- . See Fig. 2.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 2 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Lift scuff plate -1- using a plastic wedge and pull off upwards. See Fig. 3.
3. Checking fixing clips -2- on the underside of the scuff plate -1- and replacing if necessary See Fig. 3, Fig. 4.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 3 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Releasing plug connection on actuating switch and take off scuff plate.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 4 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 5 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Unscrew fastening screw -1- from scuff plate -2- . See Fig. 7.
3. Lift scuff plate using a plastic wedge and pull off upwards and remove.
4. Checking fixing clips -3- on the underside of the scuff plate and replacing if necessary See Fig. 7.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 6 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 7 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Checking fixing clips -2- on the underside of the scuff plate -1- and replacing if necessary See Fig. 10.
3. Position scuff plate -1- , press in and engage. See Fig. 10.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 8 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Tighten fastening screws -2- . Tightening torque --> Tightening torque: 3.5 ftlb. +/-0.5 ftlb. See Fig. 11.
5. Seal bores of scuff plate -3- with plastic caps -1- . See Fig. 11.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 9 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Checking fixing clips -3- on the underside of the scuff plate -2- and replacing if necessary See Fig. 13.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 10 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position scuff plate -2- , press in and engage. See Fig. 13.
3. Tighten fastening screw -1- . Tightening torque --> Tightening torque: 2 ftlb. +/-0.5 ftlb. See Fig. 13.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 11 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Preliminary work
1. Remove inner sill. --> 680519 Removing and installing inner sill - "Removing" section
2. Loosen rubber seal for door in area of cover strip. Refer to 57 63 19 Removing and installing rubber seal
for door - as of MY 2006 (Cayman S, Cayman S RHD) . Refer to 57 63 19 Removing and installing rubber
seal for door - as of MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 12 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Lift cover strip with plastic wedge and pull off cover strip.
Installation Location:
NOTE: The bonding surface must be free of dirt and grease. Clean with cleaning
solution if necessary.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 14 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 15 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position cover strip and apply. center notch in cover strip at height of bead.
SUBSEQUENT WORK
Subsequent work
1. Connect rubber seal for door in area of cover strip. Refer to 57 63 19 Removing and installing rubber seal
for door - as of MY 2006 (Cayman S, Cayman S RHD) . Refer to 57 63 19 Removing and installing rubber
seal for door - as of MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
2. Install inner sill. --> 680519 Removing and installing inner sill - "Installing" section
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 16 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 17 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Unscrew fastening screws at the front -1- and remove support for glove compartment lid -2- . See Fig. 22.
Installation Location:
NOTE: The lock barrel for the glove compartment can only be removed when
replacing the handle.
Removing the lock barrel can damage the handle.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 18 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Loosen the locking tabs slightly -Arrow A- and remove the handle -3- with the glove compartment lock -2-
out of the support for the glove compartment -4- . See Fig. 24.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 19 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position the handle -3- with the glove compartment lock -2- in the support for the glove compartment lid -4-
( -arrow- ) and secure in position with the fastening screws -1- . See Fig. 26.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 20 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
1. Position support for glove compartment lid -2- on the glove compartment lid -arrow- and screw in the
fastening screws at the front -1- . See Fig. 28.
Preliminary work
Remove glove compartment. --> 681519 Removing and installing glove compartment - chapter on
"removing"
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 22 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Press shock absorber for glove compartment -1- carefully out of the fastening tab -2- . See Fig. 31.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 23 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Turn stop -1- 45° in -direction of arrow- and remove it. See Fig. 32.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 24 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Drive out pin rod -3- , remove washer -4- and then detach the lid -1- from the glove compartment -2- ( -
direction of arrow- ). See Fig. 33.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 25 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Check rubber stops to the left and right -2- before installing the glove compartment lid -1- and replace them if
necessary. See Fig. 35.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 26 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position lid -1- and washer -4- on the glove compartment -2- and press in the pin rods -3- ( -arrows- ). See
Fig. 36.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 27 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Close the glove compartment slightly, position stop -1- on the lid and turn 45° in -direction of arrow- . See
Fig. 37.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 28 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Press shock absorber for glove compartment -1- into the fastening tab -2- . See Fig. 38.
SUBSEQUENT WORK
Subsequent work
Install glove compartment. --> 681519 Removing and installing glove compartment - chapter on
"installing"
Preliminary work
1. Remove bracket for telephone. Refer to 91 88 19 Removing and installing console for telephone - as of
MY 2005 (All Models) .
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 29 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 30 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unscrew fastening screw -1- and take out footwell outlet vent cover -2- . See Fig. 40.
2. Release electric connector -arrow A- and pull off from the socket. See Fig. 40.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 31 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unscrew fastening screws -1- and take off cover for center console -2- . See Fig. 42.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 33 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position cover for center console -2- and screw down using the fastening screws -1- . Tightening torque -->
Tightening torque: 1.5 ftlb. +/-0.15 ftlb. . See Fig. 44.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 34 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Push electric connector onto socket -arrow- until connector is felt to engage. See Fig. 46.
2. Insert footwell outlet vent cover -2- into center console cover -3- and screw down the fastening screw -1- .
Tightening torque --> Tightening torque: 7.5 ftlb. See Fig. 46.
SUBSEQUENT WORK
Subsequent work
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 35 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Install bracket for telephone. Refer to 91 88 19 Removing and installing console for telephone - as of MY
2005 (All Models) .
Preliminary work
1. Remove right dashboard cover. Refer to 70 16 19 Removing and installing dashboard cover - as of MY
2005 (All Models) .
2. Remove trim panel under dashboard on passenger's side. Refer to 70 19 19 Removing and installing trim
under dashboard - as of MY 2005 (All Models) .
3. Remove right footwell light. Refer to 96 15 19 Removing and installing footwell light - as of MY 2005 (All
Models) .
4. Remove cover (cold air bulkhead). Refer to 70 22 19 Removing and installing cover (cold air bulkhead) -
as of MY 2005 (All Models) .
5. Remove right center console cover. --> 681419 Removing and installing center console cover - chapter on
"removing"
6. Remove cup holder. --> 683019 Removing and installing cup holder - chapter on "removing"
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 36 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unscrew right fastening screws -2- from the glove compartment -1- . See Fig. 48.
2. Pull electrical line out of glove compartment -arrow- . See Fig. 48.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 37 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Unscrew left fastening screws -2- from the glove compartment -1- . See Fig. 49.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 38 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Unscrew top fastening screws -2- from the glove compartment -1- . See Fig. 50.
5. Carefully pull out glove compartment -1- ( -arrow- ) until the electrical plug connection can be removed. See
Fig. 50.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 39 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
6. Pull off electrical plug connection -2- ( -arrow- ) and remove glove compartment -1- to the rear. See Fig. 51.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 40 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Swivel in glove compartment -1- at the bottom until the electrical plug connection -2- can be connected. See
Fig. 53.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 41 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Swivel glove compartment -1- into the dashboard -arrow- and secure with the top fastening screws -2- .
Tightening torque --> Final tightening: 2 ftlb. See Fig. 54.
4. Screw right fastening screws -2- into the glove compartment -1- . Tightening torque --> Final tightening: 2
ftlb. See Fig. 55.
6. Screw left fastening screws -2- into the glove compartment -1- . Tightening torque --> Final tightening: 2
ftlb. See Fig. 56.
SUBSEQUENT WORK
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 43 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Subsequent work
1. Install cup holder. --> 683019 Removing and installing cup holder - chapter on "removing"
2. Install right center console cover. --> 681419 Removing and installing center console cover - chapter on
"installing"
3. Install cover (cold air bulkhead). Refer to 70 22 19 Removing and installing cover (cold air bulkhead) - as
of MY 2005 (All Models) .
4. Install right footwell light. Refer to 96 15 19 Removing and installing footwell light - as of MY 2005 (All
Models) .
5. Install trim panel under dashboard on passenger's side. Refer to 70 19 19 Removing and installing trim
under dashboard - as of MY 2005 (All Models) .
6. Install right dashboard cover. Refer to 70 16 19 Removing and installing dashboard cover - as of MY 2005
(All Models) .
Preliminary work
1. Remove center console cover. --> 681919 Removing and installing center console cover - chapter on
"removing"
REMOVING SHELF
Removing shelf
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 44 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unscrew fastening screws -1- and take off shelf -2- with mat -3- . See Fig. 58.
INSTALLING SHELF
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 45 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installing shelf
Installation Location:
1. Position shelf -2- and screw down using the fastening screws -1- . See Fig. 60.
SUBSEQUENT WORK
Subsequent work
1. Install center console cover. --> 681919 Removing and installing center console cover - chapter on
"installing"
Preliminary work
Remove shelf. --> 681619 Removing and installing shelf - chapter on "Removing"
Installation Location:
Fig. 61: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 47 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Unclip cover for parking-brake lever -1- using a plastic wedge -2- . See Fig. 62.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 48 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Fig. 63: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
1. Release wire harness electric plug connection for center console -1- on right and left -Arrows A- and pull
apart -Arrow B- . See Fig. 64.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 49 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Fig. 65: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 50 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Unscrew fastening screws -1- and remove floor at rear of center console -2- . See Fig. 67.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 51 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 52 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
6. Swivel center console -1- upward -Arrow A- and remove -Arrow B- . See Fig. 69.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 53 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Fig. 70: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
1. Position and align the center console -1- See Fig. 71.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 54 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 55 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Insert floor at rear of center console -2- and screw down with fastening screw -1- . See Fig. 73.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 56 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
5. Position insert at rear of center console -1- and close lid of oddments tray. See Fig. 74.
Installation Location:
Fig. 75: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 57 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Push together electric plug connection of wire harness for center console -1- until it audibly engages. See Fig.
76.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 58 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Fig. 77: Main illustration for removing and installing center console
Courtesy of PORSCHE OF NORTH AMERICA, INC.
1. Press in cover of parking-brake lever -1- until it engages. See Fig. 78.
SUBSEQUENT WORK
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 59 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Subsequent work
Install shelf. --> 681619 Removing and installing oddments tray - chapter on "Installing"
Preliminary work
1. Remove center console. --> 681719 Removing and installing center console - chapter on "Removing"
2. Remove front ashtray. --> 682019 Removing and installing front ashtray - chapter on "Removing"
4. Remove cigarette lighter. Refer to 90 62 19 Removing and installing cigar lighter - as of MY 2005 (All
Models) .
5. Remove center console socket. Refer to 90 58 19 Installing and removing socket - as of MY 2005 (All
Models) .
6. Remove interior monitoring sensor. Refer to 96 85 19 Removing and installing interior monitoring sensor
- as of MY 2005 (All Models) .
7. Removing switch for convertible top operation Refer to 61 60 19 Removing and installing switch for roof -
as of MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
8. Remove wire harness for center console. Refer to 97 20 19 Removing and installing wiring harness for
center console - as of MY 2005 (All Models) .
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 60 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 61 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Unscrew fastening screw -1- . Press in locking tabs -Arrow A- and remove insert of locking mechanism -2- .
See Fig. 80.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 62 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Loosen adhesive tape -2- and remove filler piece (sound absorber) -1- . See Fig. 81.
Microsoft
Thursday, September 24, 2009 9:47:05 AM Page 63 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Remove protective film -1- from bonding point and stick sound absorbent film -2- inside the center console -
3- . See Fig. 82.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 64 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position filler piece (sound absorber) -1- and use commercially available adhesive tape -2- to fix it to the
center console. See Fig. 83.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 65 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Press in locking mechanism insert -2- until it clicks into place and tighten with fastening screw -1- . See Fig.
84.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 66 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
SUBSEQUENT WORK
Subsequent work
1. Install wire harness for center console. Refer to 97 20 19 Removing and installing wiring harness for
center console - as of MY 2005 (All Models) .
2. Install switch for convertible top operation. Refer to 61 60 19 Removing and installing switch for roof - as
of MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
3. Install interior monitoring sensor. Refer to 96 85 19 Removing and installing interior monitoring sensor -
as of MY 2005 (All Models) .
4. Install center console socket. Refer to 90 58 19 Installing and removing socket - as of MY 2005 (All
Models) .
5. Install cigarette lighter. Refer to 90 62 19 Removing and installing cigar lighter - as of MY 2005 (All
Models) .
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 67 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
7. Installing front ashtray. --> 682019 Removing and installing front ashtray - chapter on "Installing"
8. Install center console. --> 681719 Removing and installing center console - chapter on "Installing"
Preliminary work
1. Remove shift lever knob. Refer to 34 04 19 Removing and installing shift lever knob - as of MY 2005 (All
Models) .
2. Remove selector knob. Refer to 37 04 19 Removing and installing selector knob - as of MY 2005 (All
Models) .
3. Remove cover for center console on the left and right. --> 681419 Removing and installing cover for center
console - Chapter "Removing"
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 68 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Move in with a plastic wedge -3- between cover for support frame -1- and frame -2- and unclip cover -1- -
arrow A- . See Fig. 87.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 69 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Shift gearshift lever to the rear (4th gear) and take out cover -1- toward the top -arrow B- . See Fig. 87.
Removing frame
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 70 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Loosen fastening screws -1- and take out frame -2- upwards. See Fig. 89.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 71 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Unclip cover -2- with a plastic wedge and pull upwards slightly. See Fig. 91.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 72 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Put selector lever -1- in position "D" and take out cover -2- toward the top. See Fig. 92.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 73 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 74 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Put selector lever -1- in position "D" and move in cover -2- . See Fig. 94.
3. Move in cover -2- at the front into the guide on the right and left -inset- , clip in cover completely. See Fig.
95.
Installing frame
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 75 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Move in cover -2- at the front into the guide on the right and left -inset- . See Fig. 97.
2. Tighten fastening screws -1- . Tightening torque [Nm] (ftlb.) --> Tightening torque: 1.5 ftlb. +/-0.15 ftlb.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 76 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 77 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position the cover -1- and clip completely into place. See Fig. 99.
SUBSEQUENT WORK
Subsequent work
1. Install cover for center console on the left and right. --> 681419 Removing and installing cover for center
console - Chapter "Installing"
2. Install selector knob. Refer to 37 04 19 Removing and installing selector knob - as of MY 2005 (All
Models) .
3. Install shift lever knob. Refer to 34 04 19 Removing and installing shift lever knob - as of MY 2005 (All
Models) .
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 78 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Open ashtray -1- -Arrow A- and pull it upwards -Arrow B- . See Fig. 100.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 79 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Insert opened ashtray -1- -Arrow A- and close lid -Arrow B- . See Fig. 101.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 80 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unclip cover -1- with a screwdriver and unscrew the fastening screw -2- . See Fig. 103.
2. Pull off the sun visor -3- from the mounting saddle towards the center of the car. See Fig. 103.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 81 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
1. Insert sun visor -3- into the mounting saddle. See Fig. 105.
2. Position sun visor -3- and screw down using the fastening screw -2- . See Fig. 105.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 82 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 83 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Detach the sun visor -1- from the support -2- and pull it out of the mounting saddle -3- towards the center of
the vehicle. See Fig. 107.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 84 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 85 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Insert sun visor -1- into the mounting saddle -3- and then push it into the support -2- . See Fig. 109.
Preliminary work
Remove sun visor. --> 682319 Removing and installing sun visor - chapter on "removing" [987310 987311
987320 987321] --> 682319 Removing and installing sun visor - chapter on "removing" [987120 987121]
1. Insert a narrow screwdriver between the mirror insert -3- and mirror housing -2- at the bottom center, and
unclip the mirror insert. See Fig. 110.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 86 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Pull the mirror insert -3- upwards and remove from the mirror housing -2- . See Fig. 111.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 87 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Remove bulb -5- from contact clips -4- . Take the contact clips upwards out of the holder. See Fig. 112.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 88 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Insert a narrow plastic spatula between the mirror housing -2- and the sun visor -1- on the left and right and
unclip the mirror housing. See Fig. 113.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 89 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Take the electric lead out of the mirror housing -2- and detach the mirror housing from the sun visor. See Fig.
114.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 90 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Insert electric lead into the mirror housing -2- . Position the mirror housing in the sun visor. See Fig. 115.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 91 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Press the mirror housing -2- at all four corners until it locks into place. See Fig. 116.
1. Position the contact clips -4- in the mirror housing and fit under the lug. Insert bulb -5- . See Fig. 117.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 92 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position the lugs on the right and left of the mirror insert -3- in the mirror housing. See Fig. 118.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 93 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Clip the mirror insert -3- into the mirror housing -2- on the left, right and in the middle. See Fig. 119.
SUBSEQUENT WORK
Subsequent work
Install sun visor. --> 682319 Removing and installing rear window - chapter on "installing" [987310
987311 987320 987321] --> 682319 Removing and installing rear window - chapter on
"installing" [987120 987121]
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 94 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Unscrew fastening screws -2- from cupholder -1- . See Fig. 120.
1. Push cup holder -1- into the shaft of the glove compartment. See Fig. 121.
2. Tighten fastening screws -2- . Tightening torque --> Final tightening: 7.2 ftlb. See Fig. 121.
Preliminary work
Remove glove compartment. --> 681519 Removing and installing glove compartment - chapter on
"removing"
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 95 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
REMOVING CD BOX
Removing CD holder.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 96 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Unscrew fastening screws -1- and remove CD holder -2- . See Fig. 123.
INSTALLING CD BOX
Installing CD holder
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 97 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position CD holder -2- at glove compartment -3- and secure using the fastening screws -1- . See Fig. 125.
SUBSEQUENT WORK
Subsequent work
Install glove compartment. --> 681519 Removing and installing glove compartment - chapter on
"installing"
Removing windstop
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 98 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 99 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 100 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Disengage center windstop at the latches -A- on the left and right, tilt to the rear -B- and remove. See Fig.
128.
INSTALLING WINDSTOP
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 101 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
NOTE: If the windstop is retrofitted, three fastening parts must be fitted for the center
windstop.
1. Remove trim for roll-over bar. Refer to 70 81 19 Removing and installing trim for roll-over bar - as of
MY 2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 102 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Position the two fastening parts in the upper area of the roll-over bar -1- at the existing holes and rivet them
in place -2- . See Fig. 130.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 103 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Mark the fastening part -1- centrally on the back of the trim for the roll-over bar, drill and rivet in place -2- .
See Fig. 131.
4. Install trim for roll-over bar. Refer to 70 81 19 Removing and installing trim for roll-over bar - as of MY
2005 (Boxster, Boxster RHD, Boxster S, Boxster S RHD) .
Installing windstop
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 104 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 105 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position outer windstop from the rear on the roll-over bar with the plastic tabs and press in.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 106 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2.2. Tilt windstop forwards and engage at the two upper fastening parts.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 107 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 108 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Disengage luggage net -1- from the tie-down rings -2- and remove. See Fig. 136.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 109 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Release locking mechanism of luggage mesh right and left in -direction of arrow- . See Fig. 138.
4. Disengage luggage mesh -1- right and left from the bodyshell hooks -2- -Arrow A- and then remove from
mounting saddle -3- -Arrow B- . See Fig. 139.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 111 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
NOTE: If the luggage mesh is retrofitted, the following spare parts must be fitted for the
luggage mesh.
1. Lift lining of engine compartment lid at the front -1- with a plastic wedge -2- -Arrow A- and pull out to the
front -Arrows B- . See Fig. 141.
2. Unscrew fastening screw -2- and remove tie-down ring -1- right and left. See Fig. 142.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 113 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
3. Position mounting saddle -1- right and left on the body and screw down with fastening screw -2- . -->
Tightening torque: 10 (7.5 ftlb.) Nm +0.5 (0.5 ftlb.) Nm See Fig. 143.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 114 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
4. Insert lining for engine compartment lid -1- with the clips -arrows- in the mounting points and press
downwards. See Fig. 144.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 115 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
5. Unclip lid -1- right and left from the C-pillar trim panel -2- . See Fig. 145.
6. Push cover -2- right and left fully onto the bodyshell hooks -1- . See Fig. 146.
7. Clip trim -3- right and left into the C-pillar trim panel -4- . See Fig. 146.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 117 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Insert luggage mesh -1- right and left in the mounting saddle -3- -Arrow A- and then engage in the bodyshell
hooks -2- -Arrow B- . See Fig. 148.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 118 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
2. Lock the locking mechanism of the luggage mesh right and left in -direction of arrow- . See Fig. 149.
Installation Location:
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 119 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 120 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position luggage net -1- and engage in the tie-down eyes -2- . See Fig. 151.
Preliminary work
Move convertible top to service position. Refer to 61 01 IN Diagram of convertible top - as of MY 2005
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 121 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Twist the turn-lock fasteners -1- in -direction of arrow- and lift storage pocket/box -2- up and off. See Fig.
152.
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 122 © 2005 Mitchell Repair Information Company, LLC.
2007 Porsche Boxster S
ACCESSORIES & EQUIPMENT Interior equipment
1. Position storage pocket/box -2- and fasten with the turn-locks -1- by turning in -direction of arrow- . See
Fig. 153.
SUBSEQUENT WORK
Subsequent work
End service position. Refer to 61 01 IN Diagram of convertible top - as of MY 2005 (Boxster, Boxster RHD,
Boxster S, Boxster S RHD) .
Microsoft
Thursday, September 24, 2009 9:47:06 AM Page 123 © 2005 Mitchell Repair Information Company, LLC.