Professional Documents
Culture Documents
Class 150# (18,4 Bar) Duplex (S 31803)
Class 150# (18,4 Bar) Duplex (S 31803)
TUBES
Pipe standard ASTM A790 (ASTM A 928)
Grade (UNS) S 31803 Standard specification for Seamless and Welded
Ferritic/Austenitic stainless steel pipes.
Order option
NPS (2) 1/2" 3/4" 1" 1"1/4 1"1/2 2" 2"1/2 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 28" 32"
DN (3) 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800
External diameter series 1 (19) 21.3 26.7 33.4 42.2 48.3 60.3 73,0 88.9 114.3 141.3 168.3 219.1 273.1 323.9 355.6 406.4 457 508 610 711 813
Thickness following ASME B31-3 2,77 2,87 3,38 3,56 3,68 3,91 5,16 5,49 6,02 2,77 2,77 2,77 3,40 3,96 3,96 4,19 4,19 4,78 5,54 7,92 7,92
Schedule 40S 40S 40S 40S 40S 40S 40S 40S 40S 5S 5S 5S 5S 5S 5S 5S 5S 5S 5S 10 10
Suitable for full vacuum Yes No
- Welding material compatibility = Material group CR ISO 20173. - ASTM A928 / (UNS) S 31803 accepted if necessary and if :
- Design standard : ANSI B36.19 for Sch 5S / 40S and ANSI B36.10 for Sch 10. ASME VIII UW 51 : longitudinal welded class 1,3 & 4 with 100% X-Ray tested or,
- Chamfer following ASME B16.25. ASME VIII UW 52 : longitudinal welded class 5 with X-Ray spot examination.
FLANGES
Material
Description Standard DN (3) NPS (2) Class (1) Standard / Material Flange facing finish (ASME B16.5 § 6.4.5.3)
group
Slip-on (RF) ASME B16.5 100 - 600 4" - 24" For information: Ra min/max : 3.2/6.3
ASME B16.5 15 - 80 1/2" - 3" For information: Ra min/max : 3.2/6.3
Welding neck (RF)*
ASME B16.47 Type A 700 - 800 28" - 32" 2.8 ASTM A182 F51 For information: Ra min/max : 3.2/6.3
ASME B16.5 15 - 600 1/2" - 24" 150# For information: Ra min/max : 3.2/6.3
Blind (RF)
ASME B16.47 Type A 700 - 800 28" - 32" For information: Ra min/max : 3.2/6.3
ASME B16.5 400 - 600 14" - 24" ASTM A 105 Lined For information: Ra min/max : 3.2/6.3
Lined Flange ** 1.1
ASME B16.47 Type A 700 - 800 28" - 32" ASTM A240 S 31803 For information: Ra min/max : 3.2/6.3
* Thickness identical to pipe used.
** Lined flange to be used only outside buildings
GASKET
Type Thickness
Description Standard DN (3) NPS (2) Class Material NOTES
(11) (mm)
Flat gasket ASME B 16.21 15 - 800 1/2" - 32" 150# IBC EPDM 3
BOLTING
øD øD
Description Standard Standard / Material Grade Alternative NOTES
Min Max
Stud Bolt ISO 262/ 68-1 M12 M36 ASTM A 193 M B7 ISO 898-1 class 8.8 (Stud bolt with 2 nuts) Metric thread profile
Nuts ISO 262/ 68-1 M12 M36 ASTM A 194 M 2H ISO 898-2 class 8 Hexagonal thickness: H ≥ 0,8 D
Washers ISO 7089 12 36 Steel * Normal series - * Washers of hardness class 200 HV- 2 washers per bolt
Coating & Protection See chapter 10 part 10.4.2 in PIPING, GASKETS & BOLTING SPECIFICATION Corrosion Protection
STEEL WELDED FITTINGS FOR ACCESSORIES
Type Standard /
Standard DN (3) NPS (2) Assembly Schedule NOTES
fittings Material
MSS SP97
Weldolet ASTM A182 - For thickness (schedule) see weldolet connection table
depending 125 - 150 5" - 6" Butt Weld STD
(Header / Branch connection) F51 - Full size
schedule
Type Standard /
Standard DN (3) NPS (2) Assembly Schedule NOTES
fittings Material
OTV-SIDEM
20-22 rue de Clichy 75009 Paris - France.
Contact : phililppe.brunet@veoliawater.com 1/2
PIPING CLASS
Class 150# (18,4 bar)
Duplex (S 31803) P3400
ASME B31.3
NOTES
(1) Class following ASME B16.5 §1.9.1. (11) IBC : Inside Bolt Circle.
(2) NPS (Nominal Pipe Size) following ASME B16.5 §1.9.2. (12) -
(3) DN (Nominal Diameter) following EN ISO 6708. (13) -
(4) - (14) Fluid type following ASME B31.3 §345.4.1.
(5) Straight pipe under pressure, following ASME B31.3 §304.1.2. (15) -
(6) - (16) -
(7) Body class must match flanges class B16.5. (17) -
(8) - (18) -
(9) Following ASTM A530. (19) Following ISO 1127.
(10) Following B31.3 §319.
This document is the property of SIDEM. It must not be reproduced or disclosed to others without written authorisation from the company.
OTV-SIDEM
20-22 rue de Clichy 75009 Paris - France.
Contact : phililppe.brunet@veoliawater.com 2/2