Professional Documents
Culture Documents
Google Authenticator Service How To Start GB
Google Authenticator Service How To Start GB
Google Authenticator Service How To Start GB
In I-Service, Google Authenticator is enabled per account. Each user should have a unique account to
access I-Servis.
ATTENTION!!! In the event of loss of the device/loss of the phone, tablet, etc., it is possible to
regain access to the account using the QR code generated at this stage -
if printed or otherwise retained.
6. After scanning or entering the code on the device (phone) - the Google Authenticator app will
display a two-step authentication code (usually six digits).
Page |3
7. At the same time, a link should be delivered to your email address, which you should "click" on.
8. The next step is to complete the field indicated below - with the code from the Google Authenticator
application (see point 7).
Page |4
9. Once this service has been activated, a one-time code must be entered when logging into the I-
Service3 account, which is generated on the user's mobile phone.
NOTE!!!
In the event of loss of the device/loss of the phone, tablet, etc., it is possible to regain access to
the account using the backup key generated during the access activation process (see point 5) -
QR CODE