GOVERNMENT COLLEGE OF ENGINEERING

BODINAYAKANUR, THENI - 625582

INTERNSHIP REPORT

Submitted by
VIGNESH PRABHU K (923321114049)

In partial fulfillment for the award of the

degree of

BACHELOR OF ENGINEERING
in

MECHANICAL ENGINEERING

ANNA UNIVERSITY : CHENNAI 600025

DURING ACADEMIC YEAR 2023-2024

 GOVERNMENT COLLEGE OF ENGINEERING,

BODINAYAKANUR

ANNA UNIVERSITY: CHENNAI 600 025

This is to certify that the “Internship report” submitted by

VIGNESH PRABHU K(923321114049) for the work done and
submitted duringacademic year 2023 - 2024, in partial fulfilment of the
requirements for the award of the degree of BACHELOR OF
ENGINEERING in MECHANICAL ENGINEERING at Government
College of Engineering, Bodinayakkanur, Theni.

SIGNATURE
Dr.J.Aldrin Raj.ME.,Ph.D.
INTERNSHIP COORDINATOR
MECHANICAL ENGINEERING.
GOVERNMENT COLLEGE OF
ENGINEERING,
BODINAYAKKANUR-625582.
1
SIGNATURE
Dr.T.PremsinghInbaraj.,M.E.,Ph.D.
HEAD OF THE DEPARTMENT
MECHANICAL ENGINEERING
GOVERNMENT COLLEGE OF
ENGINEERING,
BODINAYAKANUR-62558.
 ACKNOWLEDGEMENT

We would like to express our gratitude to

Dr.C.Vasanthanayaki.,M.E., Ph.D. Principal, Government College of
Engineering, Bodinayakkanur, for her valuable response towards the
completion of the project.

We express our sincere gratitude Dr.T.Premsingh Inbaraj.,M.E.,

Ph.D.Head of the department, Mechanical Engineering, Government
College of Engineering, Bodinayakkanur, for hissupport.

We express sincere thanks to our supervisor

Dr.J.Aldrin Raj.ME.,Ph.D for his continuous support, guidance and
encouragement throughout the project.

I extend my gratefulness to M.MUTHU KUMAR,B.E., Senior

Technical Officer, SRI PANDIAN INDUSTRIES,Vandiyur,
Madurai, for extending the amenities available in the Department.

I extend my gratefulness to M.MUTHU KUMAR,B.E.,SRI

PANDIAN INDUSTRIES,Vandiyur Madurai, for extending the
amenities available in the Department.

We thank all the staffs, faculties and incharges who helped us in this
internship training program at SRI PANDIAN INDUSTRIES– Madurai,
Tamil Nadu.
 TABLE OF CONTENTS

Chapter PAGE
TITLE
NO NO
ABSTRACT
OVERVIEW
1 Introduction of Sheet Metal Processing
2 Sheet Metal Tolerances
3 Raw Material storage
4 Shearing process
5 Strip cleaning
6 Pressing process
7 De-burring
8 Facing
9 Visual Inspection
10 Counting & Packing
11 Dispatched
 ABSTRACT

This report presents the experience and skills gained from the training
under taken at SRI PANDIAN INDUSTRIES,Vandiyur, Madurai, Tamil
Nadu. Our training has been on the machining of various conventional and
unconventional machines, their manufacturing and productions.

During this period, we trained on a learnt and practice various

operations on machines such as lathe,Vertical milling and moulding
machineries.

This report discusses the skills gained and experience gathered during
the period of training, justifying the relevance of the scheme in equipping
students with needed technical competences to thrive in the real world.