Professional Documents
Culture Documents
Coreldraw Driver Guide
Coreldraw Driver Guide
Click ‘start’ key to choose setup as ‘printer’, then double-click the column of
select ‘local printer’ , then click ‘next’ (this process is only for LAN);
If you can find related operation system in driver, please make a choice. Otherwise,
1
c.Then select ‘OEMSETUP.INF’
2
2. Set Printer Model “Graphtec CE1000-60”
Make ‘Graphtec CE1000-60’ as defaulting printer, then set printer;
It’s no need to set port if LPT1 is selected. If port is selected as COM 1 or COM 2,
3
b. Set Paper & Option:
4
(4)Enter <option>, select ‘programmable resolution’ as 0.1mm.
For letters, please profile filament at first , see the picture , click Hairline Outline .
5
Then enter ‘fill’. ‘No Fill” is selected for output.
b. Rotated 90°angle for well edited letterings or graph, the output will be cut out
6
c. Set Print:
Set “layout” as left bottom corner, set scaling as 98.5 (see picture 1)
Make sure no error with printer’s option (picture 2 is correct; picture 3 is with
Picture 1
Picture 2
7
Picture 3