Professional Documents
Culture Documents
Chilled Water Pump
Chilled Water Pump
1.1 The chilled water pumps shall be non-self-priming, Single-stage centrifugal pump in
accordance with EN 733, with axial suction ports and radial pressure ports. The pump shall be of
rear pull out design.
1.2 The pump and motor shall be fixed in a common casted base frame and the motor shall be
connected to pump through a spacer coupling with proper coupling guard . The complete pump &
motor set shall be factory assembled.
1.3.2 Impeller
The impeller shall be G-CuSn10 bronze, hydraulically and dynamically balanced, keyed
to the shaft. The shaft shall be of X30Cr13 Stainless steel material
1.3.3 Shaft
The pump shaft shall be Stainless Steel.