Professional Documents
Culture Documents
Assignment #2 - 2007
Assignment #2 - 2007
Engineering
Faculty of Pet. and Min. Eng. 4th Year
(B.Sc.)
Petroleum Eng. Dept.
Assignment 2
Calculation of the IHIP by the Volumetric Method
2. Discuss, briefly, the methods used for determining IHIP volumetrically (from
both isopach maps and structure contour maps).
Contour 0 10 20 30 40 50 60 70 80 90 95
line (OWC)
Area, inch2 66 60 54 48 42 36 30 24 18 8 0
You are required to calculate the original oil in place (N) using the volumetric
method (using both Trapezoidal and Simpson methods). Which one is more
accurate? And why?
4. A bottom water drive reservoir has the following data: Pi = 4500 psi, θ =230°,
= 28 % , rw =7840 ft, Swc =27 %, h = 138 ft , βoi = 1.45 bbl/stb. Using the
volumetric method, calculate the OOIP (N).
Contour 0 10 20 30 40 50 55 60 70 80 90 94
line
Area, 1360 1110 880 610 400 300 250 130 60 25 10 0
inch2
6. Using the volumetric method, calculate the OOIP, N, and the IGIP, G, for the
following reservoir data:
= 20 %, Swi =30 %, βgi = 0.001 bbl/scf, βoi = 1.3 bbl/stb, Map scale = 1:20000
Suez Canal University Petroleum Reservoir
Engineering
Faculty of Pet. and Min. Eng. 4th Year
(B.Sc.)
Petroleum Eng. Dept.
Assignment 2
Calculation of the IHIP by the Volumetric Method
Contour 0 10 20 30 40 50 55 60 70 80 90 96
line (OWC) (GOC)
Area, 300 270 240 220 190 160 120 80 38 17 7 0
inch2
Best Wishes