Priority levels from 1 to 16 determine which command wins when multiple commands are applied to the same BACnet output, with the highest priority winning. When binding a Function Block program to a BACnet object, priority 16 should be used, and when binding an output to monitor its value in a program or graphic, the Value property should be used.
Priority levels from 1 to 16 determine which command wins when multiple commands are applied to the same BACnet output, with the highest priority winning. When binding a Function Block program to a BACnet object, priority 16 should be used, and when binding an output to monitor its value in a program or graphic, the Value property should be used.
Priority levels from 1 to 16 determine which command wins when multiple commands are applied to the same BACnet output, with the highest priority winning. When binding a Function Block program to a BACnet object, priority 16 should be used, and when binding an output to monitor its value in a program or graphic, the Value property should be used.
Priority levels from 1 to 16 determine which command wins when multiple commands are applied to the same BACnet output, with the highest priority winning. When binding a Function Block program to a BACnet object, priority 16 should be used, and when binding an output to monitor its value in a program or graphic, the Value property should be used.
Check the BACnet Interface Manager in Control Panel Priority 1
Priority 2 In BACnet, all commands have 16 Priority 3 priority levels. Function Block Priority 4 Program 1 Priority 5 If several commands are applied on Priority 6 the same output, the one with highest Priority 7 priority wins. Manual Function Block Priority 8 operator Program 2 Priority 9 Function Block programs does not Priority 10 support Command priorities. Priority 11 Priority 12 When binding from a Function Block Priority 13 program to a BACnet object, priority Graphics Priority 14 16 should be used. Priority 15 Priority 16 When binding from the output to a Value program or a graphic, (to monitor the value), the Value property should be used