12 - BOM For MV Switchgear Pump Station 2nd Lift

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SHIMBAR PJSC

TECHNICAL SPECIFICATIONS - BILL OF MATERIALS


MV Switchboard : MCC: Motor Feeders
6kV , 800A/630 A 25kA 10 panels comprising of ( 2 IC + 1 BC + 5 OG+2BPT ) VCB switchboard, equipped as detailed below: - 1 set.
Sl. Outgoing to
Description Ratings BUS PT
No. Incomer Buscoupler VFD
2 1 5 2
1 VACUUM CIRCUIT BREAKER 800 A 800 A 630 A
Horizontal Draw Out/Isolation VCB fitted with
Manual/Motor Operated spring charging
6kV,
mechanism with 230V AC/220V DC operated
800A/630A,
Universal Motor & Motor Control Switch,
25kA for 3 sec
Mechanical ON/OFF indicator Operation Counter,
Automatic safety shutters 1 1 1
Shunt trip coil 110V DC Yes ` Yes
Closing Coil 110V DC Yes Yes Yes -
Auxiliary contact (6 N.O. + 6 N.C.) 110V DC, 10A Yes Yes Yes -
1.1 Antipumping Feature 110V DC Yes Yes Yes -
2 POTENTIAL TRANSFORMER -

(6kV/√3)/(110
Single Phase, Resin cast, Dry type, Draw out type
V/√3)/( 1 set
potential transformer with one set of HTFS /LTFS.
110V/√3)
- -
Sec1: for metering Cl :1.0,50VA - - Yes
2.1 Sec2: for protection Cl: 3P,50VA - - Yes
3 CURRENT TRANSFORMER
3 Nos. 3 Nos. 3 Nos.
Single phase, Resin Cast Dry type CT of ratio: **/5-5A
(**100A) (**50A) (**50A)
Core1: for metering, Cl:0.5, 5VA Yes Yes Yes
3.1 Core2: for Protection Cl:5P20, 5VA Yes Yes Yes
4 METERING
Cl. 0.5, 5A,
96Sq.mm Digital Ammeter with inbuilt selector switch 110V -
4.1 AC Aux., 1 No. 1 No. 1 No.
Cl. 0.5, 110V
AC (PT), 110V
96Sq.mm Digital Voltmeter with inbuilt selector switch
AC
4.2 Aux., 1 No. - - 1 No.
Cl. 0.2, 5A,
3Phase, 4Wire, 3Element Digital Multifunction meter 110V AC (PT),
-
with RS485. 110V AC
4.3 Aux., 1 No. 1 No. 1 No.
5 RELAYS/PROTECTION -
Numerical type directional multifunctional
Protection relay with IEC 61850 5A,110V
-
Communication protocol. DC,110V (PT)
5.1 (50,50N,51,51N,86,95,27,59) 1 No. - -
Numerical type multifunctional Protection relay with
IEC 61850 Communication protocol. 5A,110V DC
5.2 (50,50N,51,51N,86,95) - 1 No. 1 No.
Gapless Metal oxide surge arrestor suitable for Indoor Cl-II,
-
5.3 duty 6kV,10kA - - 3 Nos.
6 INDICATIONS LAMPS
VCB OFF/ON/Auto Trip/Trip Circuit Healthy/Spring
Charged 110V DC
6.1 Test/Serice Indication Lamps (Cluster LED Type) 1 set 1 set 1 set 1 set
6.2 R,Y,B Phase Indication Lamps (Cluster LED Type) 110V AC 1 set - -
CONTROL SWITCHES/PUSH BUTTON/
TERMINAL -
7 BLOCK/ANNUNCIATION
7.1 Breaker Control Switch (Close-Neutral-Trip) 32A,110VDC 1 No. 1 No. 1 No. -
7.2 Local/Remote Selector Switch (L/R) 16A, 110VDC 1 No. 1 No. 1 No. 1 No.
8 Control wiring with appropriate colours 1 lot 1 lot 1 lot 1 lot
9 BUS BAR -
Electrolytic Grade Copper Busbar HT Sleeve Insulation 6kV,630A,
with R Y B 25kA/3 1 set
9.1 Colour Bands at regular intervals Sec 1 set 1 set 1 set
9.2 Earth Bus 25*6mm Copper 1 set 1 set 1 set 1 set
10 COMMON FOR SWITCHGEAR
Space heater with ON/OFF switch &
Thermostat,single phase switch with socket,cubicle
illumination lamp with door limit switch, MCBs for 230V AC 1 set
AC/DC Control, Test/service indication.Terminal Blocks
10.1 with 10% spare 1 set 1 set 1 set
10.2 MS Sheet steel enclosure & installation suitable for Indoor (IP4X) 1 set 1 set 1 set 1 set
10.3 Base frame - 1 set 1 set 1 set 1 set
11 TERMINATION
Provision for receiving Incoming Cable, excluding
termination kit and -
11.1 glands Bottom Busbar Bottom Bottom
Busbar cum
Provision for receiving Outgoing Cable, excluding
- bus adaptor
termination kit and glands
11.2 Busbar chamber' Busbar

You might also like