Professional Documents
Culture Documents
PD1570 and IRR Mock
PD1570 and IRR Mock
a. aircraft model
b. rocket
c. propeller
d. wing section
2. Section 22 of P.D. 1570 states that the Board may refuse to issue Certificate of Registration to any person who
is/has the following, except _____.
a. unsound mind
b. guilt of civil offense
c. incurable disease
d. None of the above
3. He shall act in professional matters as a faithful agent or trustee, and treat as confidential all matters and
information concerning business affairs, technical processes, and others. This code of ethics is included in _____.
4. The imprisonment period for violating the law governing the practice of Aeronautical Engineering is _____.
5. Section 2 of the P.D. 1570 describes its objectives. Which of the following is not an objective of the P.D. 1570?
components
d. All of these
7. The Rules and Regulations including the Code of Ethics of the Board of Aeronautical Engineering shall be
published in the Official Gazette and shall take effect in how many days after the date of their publication? a. 15
days
b. 30 days
c. 60 days
d. 90 days
8. What is the maximum diameter of the seal of the Board of Aeronautical Engineering? a. 45 mm
b. 48 mm
c. 50 mm
d. 52 mm
2021 AEROBOARDS
a. justice
b. integrity
c. honesty
d. courtesy
2022 AEROBOARDS
10. The Code of Ethics for Aeronautical Engineers encompasses relations with certain entities. Which of the
following is not among the specified entities?
a. State
b. School
c. Profession
d. Public
11. What document must a foreigner submit to qualify to take the technical written examination prior to registration
for the practice of aeronautical engineering?
a. Proof of Residency
b. Proof of Competency
c. Proof of Registration
d. Proof of Reciprocity
12. Which among the following statements regarding the removal of board member is incorrect?
a. Any member of the Board may, upon recommendation of the Commission be removed by the President of the
Philippines.
b. The reasons for removal include neglect of duty, incompetence, commission or tolerance of irregularities in the
examinations, malpractices, or unprofessional or unethical, immoral, or dishonorable conduct.
c. The member to be removed must be given the opportunity to defend himself in a proper administrative
investigation.
a. Commission alone
b. Board alone
14. Written examinations of candidates desiring to practice aeronautical engineering in the Philippines shall be given
by the ______ once a year at a date and place to be fixed by the _____.
a. Board; Board
b. Board; Commission
c. Commission; Commission
d. Commission; Board
15. The relative weight for every subject shall always be divisible exactly by _____.
a. three (3)
b. four (4)
c. five (5)
d. ten (10)
16. In order to pass the written examination, the candidate's GWA must be equal to or greater than _____%, with no
rating below _____% in any subject.
a. 75; 75
b. 75; 50
c. 50; 75
d. 50; 50
17. The P.D. 1570 was adopted by the Board of Aeronautical Engineering at the Metropolitan Manila, Philippines last
_____.
18. The P.D. 1570 was approved and promulgated as the Rules and Regulations of the Board of Aeronautical
Engineering last _____.
a. Recaredo R. Albano
b. Teofilo P. Alberto
c. Timoteo A. Cordova Jr.
d. Numeriano G. Tanopo Jr.
20. What is the relative weight of the subject Aerodynamics in the written examination?
a. 10%
b. 15%
c. 20%
d. 25%
21. What is the relative weight of the subject Aircraft Powerplant in the written examination?
a. 10%
b. 15%
c. 20%
d. 25%
22. What is the relative weight of the subject Aircraft Structures and Design in the written examination?
a. 10%
b. 15%
c. 20%
d. 25%
23. What is the relative weight of the subject Mathematics in the written examination?
a. 10%
b. 15%
c. 20%
d. 25%
24. What is the relative weight of the subject Airframe Construction, Repair, and Modification in the written
examination?
a. 10%
b. 15%
c. 20%
d. 25%
25. What is the relative weight of the subject Engineering Economics & Management, Laws & Ethics in the written
examination?
a. 10%
b. 15%
c. 20%
d. 25%
a. Planning design, analysis, construction/fabrication, sub-assembly, test and evaluation of aircraft structures,
powerplant, and other aircraft components b. Final assembly of aircraft
c. Pre-flight inspection
d. All of the above.
28. The _____ in the seal of an Aeronautical Engineer symbolizes that aeronautical engineering is a dynamic and
progressive profession.
a. wing section
b. shockwaves
c. electrons
d. atom
e.
29. Which is not true regarding the seal of the Aeronautical Engineering?
a. Pre-flight, post-flight checks and functional test of aircraft and its components
b. Release of aircraft for flight, monitoring of aircraft performance, and other activities performed on the group
and in flight to ensure aircraft airworthiness and flight safety c. Directing and controlling aircraft in flight
d. Marketing or selling of aircraft and/or its components, which require thorough technical knowledge of
aircraft/components specifications, performance, maintenance, repair and other pertinent information.
2021 AEROBOARDS
2021 AEROBOARDS
a. RA 9497
b. RA 776
c. PD 1570
d. PCAR