Professional Documents
Culture Documents
Mur3020wt D-2316223
Mur3020wt D-2316223
MUR3040WTG,
MUR3060WTG
Switch Mode
Power Rectifiers
http://onsemi.com
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
ULTRAFAST RECTIFIERS
Features
• Ultrafast 35 and 60 Nanosecond Recovery Time
30 AMPERES, 200−600 VOLTS
• 175°C Operating Junction Temperature
• Popular TO−247 Package 1
• High Voltage Capability to 600 V 2, 4
ORDERING INFORMATION
http://onsemi.com
2
MUR3020WTG, MUR3040WTG, MUR3060WTG
MUR3020WT
IR , REVERSE CURRENT ( μ A)
25°C
50 10
5
30 2
1
20 0.5 25°C
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.1
10
0.05
0.02
0.01
5 60 80 100 120 140 160 180 200 0 20 40
VR, REVERSE VOLTAGE (VOLTS)
*The curves shown are typical for the highest voltage device in the voltage grouping.
3 Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
2 Figure 2. Typical Reverse Current (Per Leg)*
14
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
I
dc (RESISTIVE LOAD) PK = π
12 14 IAV
RqJA = 15°C/W AS OBTAINED
USING A SMALL FINNED 12 I
10 HEAT SINK. (CAPACITIVE LOAD) PK = 5
IAV dc
SQUARE WAVE 10
8 10
8
dc 20
6
6
4 SQUARE WAVE
SQUARE WAVE 4
TJ = 125°C
2 RqJA = 40°C/W
AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg)
http://onsemi.com
3
MUR3020WTG, MUR3040WTG, MUR3060WTG
MUR3040WTG
IR , REVERSE CURRENT ( μ A)
50 100°C
10
100°C 25°C
TJ = 150°C 25°C 5
30
2
1
20
0.5
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
10 0.1
0.05
0.02
5 0.01
0 50 100 150 200 250 300 350 400 450 5
VR, REVERSE VOLTAGE (VOLTS)
3 *The curves shown are typical for the highest voltage device in the voltage groupin
Typical reverse current for lower voltage selections can be estimated from these sam
2
curves if VR is sufficiently below rated VR.
Figure 7. Typical Reverse Current (Per Leg)*
1
14
0.5
dc
12
0.3
10
SQUARE WAVE
0.2 8
6
0.1
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 4
vF, INSTANTANEOUS VOLTAGE (VOLTS) RATED VOLTAGE APPLIED
2
Figure 6. Typical Forward Voltage (Per Leg)
0
140 150 160 170 1
TC, CASE TEMPERATURE (°C)
14
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
I
dc (RESISTIVE-INDUCTIVE LOAD) PK = π
14 IAV
12 I
RθJA = 15°C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5 dc
12 IAV
10 USING A SMALL FINNED
10
HEAT SINK.
SQUARE WAVE 10
8
20 SQUARE WAVE
8
6 dc
6
4
SQUARE WAVE 4
TJ = 125°C
2 RθJA = 40°C/W
AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg)
http://onsemi.com
4
MUR3020WTG, MUR3040WTG, MUR3060WTG
MUR3060WT
100 200
100
50 TJ = 150°C
IR , REVERSE CURRENT ( μ A)
50 20
10
TJ = 150°C 100°C
5
30
100°C 2
20 1
0.5 25°C
25°C
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2
10 0.1
0.05
0.02
150 200 250 300 350 400 450 500 550 600 650
5
VR, REVERSE VOLTAGE (VOLTS)
*The curves shown are typical for the highest voltage device in the voltage grouping.
3 Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
2 Figure 12. Typical Reverse Current (Per Leg)*
16
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
1 14
dc
12
SQUARE WAVE
0.5 10
8
0.3
6
0.2
4
RATED VOLTAGE APPLIED
2
0.1
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0
vF, INSTANTANEOUS VOLTAGE (VOLTS) 140 150 160 170 180
TC, CASE TEMPERATURE (5C)
Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg)
10
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
16
dc I dc
RqJA = 16°C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5
9 IAV
FROM A SMALL TO-220 14
8 HEAT SINK. 10
12
7 SQUARE WAVE
6 10
20 SQUARE WAVE
5 8
4 dc (RESISTIVE-INDUCTIVE LOAD)
6
3 IPK = π
SQUARE WAVE 4 I
2 TJ = 125°C AV
RqJA = 60°C/W
1 AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 14. Current Derating, Ambient (Per Leg) Figure 15. Power Dissipation (Per Leg)
http://onsemi.com
5
MUR3020WTG, MUR3040WTG, MUR3060WTG
0.2 0.1
ZqJC(t) = r(t) RqJC
0.1 0.05 P(pk) RqJC = 1.5°C/W MAX
0.01 D CURVES APPLY FOR POWER
0.05 t1
PULSE TRAIN SHOWN
t2 READ TIME AT T1
SINGLE PULSE
DUTY CYCLE, D = t1/t2 TJ(pk) - TC = P(pk) ZqJC(t)
0.02
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K
t, TIME (ms)
1K
500 TJ = 25°C
C, CAPACITANCE (pF)
200
100
50
20
10
1 2 5 10 20 50 100
VR, REVERSE VOLTAGE (VOLTS)
http://onsemi.com
6
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE D
DATE 17 MAR 2017
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
SCALE 1:1 2. CONTROLLING DIMENSION: MILLIMETERS.
SEATING 3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
NOTE 4 A B PLANE
0.635 M B A M
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
E A P NOTE 6 MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
E2/2 EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
Q S L1.
E2 6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
NOTE 4 TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
D 7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
NOTE 3 BY L1.
4
MILLIMETERS
1 2 3 DIM MIN MAX
A 4.70 5.30
2X
F L1 A1 2.20 2.60
b 1.07 1.33
b2 1.65 2.35
L NOTE 5 b4 2.60 3.40
c 0.45 0.68
D 20.80 21.34
E 15.50 16.25
E2 4.32 5.49
2X b2 c e 5.45 BSC
F 2.655 ---
b4 A1 L 19.80 20.80
3X b NOTE 7 L1 3.81 4.32
0.25 M B A M P 3.55 3.65
e Q 5.40 6.20
S 6.15 BSC
GENERIC
MARKING DIAGRAM*
XXXXXXXXX
AYWWG
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
◊
Mouser Electronics
Authorized Distributor
onsemi:
MUR3020WT MUR3020WTG MUR3060WT MUR3060WTG MUR3040WTG