Professional Documents
Culture Documents
Experiment No.1
Experiment No.1
Objectives:
You will learn following.
To create a project.
To understand the tools.
To run program in MPLABX.
Background:
Material Required:
Figure 1
Figure 2
3. Then open the file from the downloads and read and agreed the
license.
Figure 3
4. Now select the user system proxy settings and click the next.
Figure 4
Figure 4
Figure 5
6. Setup is ready to install.
Figure 6
7. Setup is installing.
Figure 7
Figure 8
9. Now select the all launches and compliers and tap to finish.
Figure 9
Figure 10
11. And allow the accesses.
Figure 11
Figure 12
12. Here the complier is installing and select next in the setup
window.
13. Select the free in the setup window of license type And tap
next.
Figure 13
14. Tap on the option that (I accept the Agreement) and select
next.
Figure 14
15. Now we setup the complier settings after its installation.
Figure 15
Figure 16
16. Here we enter the host ID and finish the installation.
Figure 17
Figure 18
17. Here our main window of MPLABX is opened.
Figure 19
Figure 20
18. Now open the MPLAB IPE and enter the device name the
window of MPLAB IPE which we are using in the software .
Figure 22
Figure 23
Procedure for making a project:
1. First we tap on the file on the top left corner and select new
project.
Figure 24
Figure 25
3. Here we have to select the device and tap on next.
Figure 26
Figure 27
5. Here we enter our project name, location and folder.
Figure 28
Figure 29
Conclusion:
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________