Professional Documents
Culture Documents
Cargill - IncroSlip - Brochure - v0 - 2022
Cargill - IncroSlip - Brochure - v0 - 2022
The Ultimate in
High Stability
and Performance
INCROSLIP ™
IncroslipTM
Manufactured using proprietary processes to ensure the Why are High Stability Additives Needed?
highest level of stability, the Incroslip range can be used in Standard slip additives, such as erucamide, oleamide and
many applications where high stability, long-term behenamide are commonly used in many plastics
performance and excellent customer experience is applications, including packaging, automotive and high
desired. This allows you to choose the best solution for value plastics. These additives bring many benefits in
your particular performance requirements. processing and end-use, including high, fast or controlled
slip, and anti-block.
The Incroslip range has been optimized to provide
different combinations of slip and oxidative stability to suit However, some of these standard additives contain double
different polyolefin application requirements. Products in bonds which cause the additive to be prone to oxidative
this range can be added via masterbatch, during breakdown, resulting in poor stability. Poor oxidative
compounding or extrusion at levels between 0.1 and 1% stability can lead to issues in the final part over time or
depending on the application. when subjected to stressed conditions such as high
temperature or prolonged exposure to UV light.
2
Product Information
PHYSICAL
RENEWABLE
PRODUCT FORM AT PRIMARY EFFECT APPLICATION COMMENTS
CARBON
25°C
IncroslipTM SL Bead Slip, anti-scratch, Film, caps, packaging For use when the ultimate in high slip and stability is required 100%
torque release and automotive
IncroslipTM C Powder/ Bead Torque release Caps & closures For use when high slip is required with good 100%
organoleptic properties
IncroslipTM Q Bead Torque release Caps & closures For use when both slip and stability are required 100%
Incroslip TM
B Bead Torque release Caps & closures For use when high stability is required 100%
Incroslip TM
G Bead Mold release Automotive For use when high stability is required 100%
anti-scratch
Spotlight on Incroslip SL
The Incroslip range has been optimized to provide different combinations of slip and oxidative stability to suit different
polyolefin application requirements. Products in this range can be added via masterbatch, during compounding or
extrusion at levels between 0.1 and 1% depending on the application.
3
INCROSLIP ™
Masterbach
and Compound
Slip, torque release, mold release and anti-scratch Save Costs by Using Less Additive
additives are often added into polymers via a Lowers the requirement to over-dose the slip additive to
masterbatch or compound. It is recommended that our ensure performance is achieved over time. Therefore,
IncroslipTM products are added this way to ensure there is potential to reduce the total amount of slip
optimized dispersion and accurate dosing. The Incroslip additive used resulting in a cost saving.
range offers many stability benefits over standard grade
additives, including long-term performance, excellent Incroslip SL shows improved stability over standard
color stability and shelf-life extension. erucamide in unstabilized (anti-oxidant free) LDPE
masterbatch. As shown in figure 1, after 28 days in
Added Benefits in Polyolefin Masterbatch accelerated aging conditions, Incroslip SL is still present
Incroslip products offer improved stability in polyolefin at 92% of its original level, whereas standard erucamide
masterbatch by resisting oxidative breakdown. This can has broken down resulting in only 29% of the product
result in the following benefits: remaining. Similar results are observed in LLDPE
masterbatch.
Extended Shelf Life of the Product
Superior stability can result in a product that degrades Color Stability
more slowly, potentially increasing the shelf life of the The improved stability of Incroslip products can result in
resin, resulting in cost saving and less waste. improved color stability of masterbatch and compound
over time.
1. The amount of slip additive present in unstabilised LDPE after 2. Oxidative stability of Incroslip SL and Incroslip B
accelerated aging at 50°C in air vs erucamide at 120°C
Amount of additive in polymer (%)
100
Incroslip SL
80
Incroslip B
60
40
Erucamide
20
0 5 10 15 20 25 30
02 44 87 21 20 168
Days
Time on test (hours)
Erucamide Incroslip SL
4
Film & Sheet
IncroslipTM products can be used in food packaging and
non-food grade films to reduced friction during
processing, to improve ease of converting and aid in
end-use. This is done by improved slip and anti-block
performance.
4. Kinetic CoF of Incroslip SL and erucamide in LDPE blown films 5. Kinetic CoF of Incroslip SL and erucamide in hPP cast film after
after exposure to natural light over 4 years exposure to accelerated aging in a UV cabinet at 50°C
1.4 1.0
1.2 0.8
0.7
1.0
0.6
Kinetic CoF
Kinetic CoF
0.8 0.5
0.6 0.4
0.3
0.4
0.2
0.2 0.1
0.0 0.0
1 hour 1 month 4 years 432 hrs ambient 32 hrs ambient 432 hrs ambient
+ 48 hrs UV + 168 hrs UV
Control 1000 ppm Erucamide 1000 ppm Incroslip SL Control 2500 ppm Erucamide 2500 ppm Incroslip SL
5
INCROSLIP ™
IncroslipTM products are designed to deliver exceptional Unlike some traditional torque release additives, the torque
stability in cap and closure applications, by using performance of Incroslip SL is affected by the density of
proprietary production processes and unique chemistries. the polymer. The performance of Incroslip SL can be
This results in improved organoleptic properties in the final optimized by changing the density. This can be done by
product such as taste and odor. dosing Incroslip SL into HDPE caps via an LDPE
masterbatch.
Application and Release Torque
The Incroslip range of high stability additives demonstrates Organoleptics Properties
improved application and release torque in both PP and Standard torque release additives can suffer from taint,
HDPE caps and closures, as shown in figures 6 & 7. taste and odor issues, which can impact sensitive
applications like bottled water. Extensive odor testing of
Optimized Torque and Ultimate Stability the Incroslip range has shown significantly reduced odor
For ultimate stability in cap and closure applications, we when compared with standard torque release additives.
recommend Incroslip SL. The performance of Incroslip SL In a panel study of volunteers, Incroslip SL was rated as
can be optimized to achieve the desired combination of the lowest odor when compared against standard grade
torque and stability, as shown in figure 8. erucamide, benhenamide and blank HDPE.
6. Torque release - Injection molded PP, one piece closure against 7. Torque release - Injection molded HDPE, one piece closure
PET neck against PET neck
18 18
16 16
14 14
Torque (in-lbs)
Torque (in-lbs)
12 12
10 10
8 8
6 6
4 4
2 2
0 0
Erucamide Incroslip C Incroslip Q Incroslip B Erucamide Incroslip C
8. Release torque of HDPE caps containing Incroslip SL, 9. Odor tests comparing Incroslip SL, behenamide and erucamide
behenamide and erucamide at different densities to blank HDPE
18
4
16
14
3
Odour ranking
Torque (in-lbs)
12
10
8 2
6
4 1
2
0
100% HDPE 95% HDPE 90% HDPE 85% HDPE 80% HDPE
0
+ 5% LDPE + 10% LDPE + 15% LDPE + 20% LDPE Erucamide Blank HDPE Behenamide Incroslip SL
6
Molding
% Realease force 60
• Reduced processing temperature and pressures
• Less wear on ejection systems 40
7
Further Information
Cargill Bioindustrial sales and
distribution are coordinated through
an extensive worldwide network of
technical and commercial experts.
For further information or guidance
please contact us:
Smartmaterials@cargill.com