Professional Documents
Culture Documents
Handheld Tools Factsbook English
Handheld Tools Factsbook English
facts book
Content
Key principles of our tools portfolio 04 Dust collectors...............................................................................27
Impact wrenches and needle scalers......................................28
Handheld pneumatic tools Scabblers.........................................................................................29
Tampers...........................................................................................30
Introduction................................................................................... 08
Nomenclature................................................................................ 32
Hammers......................................................................................... 12
• Vibro-reduced pneumatic hammers
Handheld hydraulic tools
• Standard pneumatic hammers
• Rivet busters Introduction................................................................................... 34
Breakers........................................................................................... 15 Hydraulic hammers and breakers............................................ 35
• Light pneumatic breakers • Vibro-reduced hydraulic breakers
• RTEX range Hydraulic core drills...................................................................... 37
• Medium pneumatic breakers Hydraulic cut-off saws................................................................. 39
• Heavy pneumatic breakers
Hydraulic post and ground rod drivers.................................. 40
Pneumatic rock drills................................................................... 19 Hydraulic post puller................................................................... 41
• SRD range Hydraulic power packs................................................................ 42
• Light pneumatic rock drills
Nomenclature................................................................................ 43
• Medium and heavy pneumatic rock drills
• Pneumatic combi drills/hammers
Handheld petrol drill and breakers
• Stopers
Introduction................................................................................... 46
Underground rock drills............................................................. 24
Cobra range.................................................................................... 48
• Underground pneumatic rock drills
Nomenclature and kits................................................................ 49
• Pusher legs
3
Reliable, ergonomic and safe handheld tools
At Atlas Copco, we know the tools of the trade when it comes to designing construction equipment. Ergonomic, easy to handle and
reliable, they will be your best friend for heavy-duty construction work.
Demolition work can get dusty, but Swap tools in no time thanks to the
with our dust collector operators are quick kick latch (on selected models),
LESS protected against silica particles. Atlas or just unscrew the tool. Of course all
DUST
Copco’s pneumatic dust collectors our working tools are interchangeable
use vacuum technology to efficiently between various models. The versatility
remove dust directly at the source of our breakers and hammers allows for
and keep the silica dust level on your construction site below fast tool changes and less inventory.
the permissible exposure limit. They work indoors as well as
outdoors.
4
Always the right tool for the job
Pneumatic tools:
Do you have to use
• Ergonomic best-in-class the tool for longer YES
than 1 hour a day? PNEUMATIC
• The best possible
power-to-weight ratio NO
• Versatile: a tool for every
application
• One compressor can power YES
Do you have other
several tools pneumatic tools
• Lowest total cost of on site?
ownership
NO
Petrol-driven tools:
YES
• Fully autonomous Are you working in PETROL
a remote location
• Ideal for remote locations without power supply?
and disaster areas
NO
Hydraulic tools:
YES
Do you have to work
• Ideal when space is limited in a cramped space?
HYDRAULIC
• Compact and fast set-up
5
6
Handheld
pneumatic
tools
7
Handheld pneumatic tools
Our pneumatic tools are ergonomically Air cushioned piston
best in class and have an excellent To reduce vibration and wear, the piston
power-to-weight ratio, making them turns on air-cushions at either end of
suitable for various construction the cylinder. When working off-load,
applications. this practically eliminates metal-to-metal
contact.
Solid Body concept
The one-piece machine body means Rotating air inlet swivel
fewer parts. This will help to increase Easy handling of the tool, even when
reliability. The concept also gives a low pressurized. Available with selected tools
centre of gravity to our breakers and thus only.
a good balance of the product.
Integrated lubricator
HAPS™ system Helps to minimize tool wear and is
By reducing the in-use vibration value of excellent for cold conditions, when it can
the machine, our HAPS™ system helps to be used for anti-freeze, such as
decrease the negative effects of harmful our Breaker and Hammer AIR-OIL. It
vibration at a given trigger time. holds enough lubricant for an entire shift
of normal work. Available with selected
Highly efficient silencer tools only.
The wear-resistant polyurethane silencer
cuts the noise emission by up to 75% (as
compared to the same machine without
noise reduction, ISO 2000/14/EC).
SOFSTART™ trigger
The two-step trigger gives the operator
full control when starting a cut – even
under difficult conditions. Available
with selected tools only.
8
Handheld pneumatic tools
A workman with an Atlas Copco machine
will never have to blame his tools. Our
pneumatic breakers and hammers are More precision thanks to
designed to get more work done in a day. SOFSTART, a feature that
Vibration-tampered
HAPS™ technology dampens vibrations with HAPS™ helps the operator to slowly
and the tool’s single casting design means technology release the energy of the
fewer parts, less fuss. Try an Atlas Copco breaker. This two-step trigger
pneumatic breaker or hammer and you’ll gives unrivalled control and
feel the difference: our well-balanced a surgical precision when
making that first cut
pneumatic tools offer excellent ergonomics.
Silencer, 75%
less noise
TWO Air-cushioned
Flexible: unscrew or
The two-tooler: flip the kick latch to
swap tools.
downsize for savings
Energy-efficient handheld tools
allow you to downsize your
compressor, or to run several
breakers on the same compressor.
9
Tools - Compressor sizing guide
10
Tools model TEX 05 TEX 09 TEX 12 RTEX 15 TEX 150 TEX 190 RTEX 25 TEX 230 TEX 280 RTEX 35 TEX 33 TEX 40
light light light medium medium medium medium heavy heavy
Type of tool hammer hammer hammer
breaker breaker breaker breaker breaker breaker breaker breaker breaker
Weight (kg) 6,3 10,5 12 17 19 23 25 25,5 31,5 33,2 37 42
m³/min 0,6 1 1,2 0,9 1,5 1,6 1,1 1,8 1,9 1,3 2 2,4
Air
consumption l/s 10 17 20 15,4 25 26 18 30 32 21,5 34 40
(6 bar)
cfm 21 36 42 31,8 53 55 38 64 68 45,5 72 85
1)
Compressors with “G” in the name have a built-in generator. Compressors with PACE in their name have an adjustable pressure between 5 bar and the maximum pressure indicated in the product name.
2)
For electric compressors, the free air delivery depends on the electric current (16, 32, 50 or 64A). Figures in this overview are based on the highest electric current.
11
Vibro-reduced pneumatic hammers
Pneumatic hammers TEX 05PE 1 TEX 07PE TEX 09PE 1,2 TEX 12PE 1,2
Applications depending on weight class: Weight kg 6,5 8,7 10,5 12
• Light duty chipping and scaling work
Length mm 450 525 560 590
• Renovation and conversion work
Air consumption l/s 10 17 17 20
• Demolition
blows/
• Kiln stripping Impact rate
min
2640 1770 1800 1620
Vibration level 3 axes (ISO 28927-10) m/s² 2,4 12,4 4,2 4,0
Features: Sound power level guaranteed
Lw, dB(A) 105 104 105 105
• Full canopy vibro-reduction (2000/14/EC)
(TEX 05, 07, 09 and 12) Sound pressure level (ISO 11203) Lp, r=1m 87 87 93 93
• Noise-reduction
Tool retainer cap cap latch latch
• SOFSTART™ two-step trigger
• HAPS™ Hand and Arm Protection System Shank size HEX mm 19x50 19x50 22x82,5 22x82,5
• Air cushioned piston (TEX 05, 07, 09 and 12) Part number (HEX shank) 8461 0219 10 8461 0209 20 8461 0211 35 8461 0211 38
• Easy handling and positioning Shank size round shank mm - - 25x75 25x75
12
Standard pneumatic hammers
Applications depending on weight class: Features:
• Light-duty chipping and scaling work • SOFSTART™ two-step trigger (selected models)
• Renovation and conversion work • Noise-reduction
• Demolition • Air cushioned piston
Part number (HEX shank) - 8461 0208 01 8461 0219 00 8461 0211 05 8461 0211 02 8461 0211 32 8461 0211 30 8461 0211 12 8461 0211 13
Part number KIT - 8461 0208 02 8381 0200 33 8381020038 8381020041 8381 0200 40
Shank size round shank mm - 17,3x60 - 25x75 25x75 25x75
Part number
8461 0208 06 - 8461 0219 03 - - - 8461 0211 31 8461 0211 15 8461 0211 14
(round shank)
2)
also available in carrying case as complete set (hexagonal shank only); TEX 09, 10 and 12 Atlas Copco Standard 9000 0306 00
Kit part number: 8461 0219 02 Atlas Copco Standard with strainer 9000 0306 01
KL: kick latch, PS: silenced US Standard (not for TEX 10) 9001 0005 06
TEX 03, TEX 05 Atlas Copco Standard 9000 0305 00
Claw couplings not included in delivery
13
Rivet busters
Application: Features:
• Excellent power-to-weight ratio
Used for removing rivets in metal
• Teasing throttle for precise control
and concrete applications, including
• Rugged design and components for reliable
demolition and bridge work.
operation under tough conditions
Choose either for pistol grip or a classic
• Stepped cylinder design for added safety
D-handle.
Part number 8461 0250 16 8461 0250 17 8461 0250 18 8461 0250 19
14
Light pneumatic breakers
15
RTEX range of pneumatic breakers
25%
LIGHTER, CUSHIONED
With our newest innovation, the Atlas The secret of the RTEX lies in the
FOR LESS
Copco RTEX, you’ll be demolishing innovative long piston design. A longer VIBRATIONS
without breaking a sweat. Lightweight, piston, compared to a conventional
powerful and efficient, this tool is both breaker, increases the interaction time
ergonomic and economic. You’ll be able with each blow. As a result, the RTEX has
to work longer while only consuming half the breaking power to match a much
the air. As a result, your compressor can heavier breaker. The efficient stroke
also go down a size, or you can pair two mechanism radically lowers energy
tools with one compressor. consumption.
Shank size Hex mm 25 X 108 25 X 108 28x160 / 28 notch 32x160 28x160 / 28 notch 32x160
Part number 8461 0115 10 8461 0125 10 8461 0125 20 8461 0125 30 8461 0135 20 8461 0135 30
TEX 230PE Part number 8461 0225 31 8461 0225 34 8461 0225 35
1)
Hex shank (mm) Atlas Copco Standard 9000 0306 00
Atlas Copco Standard with strainer 9000 0306 01
TEX P60 S Kit available(Except US & Canada): US Standard 9001 0005 06
8381020056, 8381 0200 55
See page 27 for more information
17
Heavy pneumatic breakers
Applications:
Pneumatic breakers TEX 37* TEX 40PE TEX P90S
• Heavy-duty demolition breakers for use in
medium and hard materials such as asphalt Vibro-reduced NO YES YES NO NO
and reinforced concrete Weight kg 37 42 42 43 43
Data at 6 bar (90 psi) air pressure Claw couplings not included in delivery
Suitable couplings:
Hex shank (mm)
1)
Atlas Copco Standard 9000 0306 00
*Available only for India, Middle East Atlas Copco Standard with strainer 9000 0306 01
& South East Asian countries US Standard 9001 0005 06
18
Pneumatic rock drills (SRD)
Applications:
Pneumatic rock drill SRD 20 SRD 25
• Drills up to 6 m depth
• Production drilling in quarry/dimension Weight kg 24 27
stone industry
Length mm 590 600
• Blast hole and secondary drilling
Air consumption at 6.0 bar l/s 39 50
Features:
Impact rate blows/min 1950 2040
• Noise-reduction
• HAPS™ Hand and Arm Protection System Revolutions rpm 200 250
• Built in air flushing
• Extra flushing for quick and efficient Penetration rate mm/min 270 336
hole cleaning with non stop drilling
Hose connection mm 19 19
• Less time for maintenance
Vibration level 3-axis (ISO 28927-10) m/s² 9 10.7
Data at 6 bar (90 psi) air pressure. Claw couplings not included in delivery.
Suitable couplings:
Atlas Copco Standard 9000 0306 00
Atlas Copco Standard with strainer 9000 0306 01
US Standard 9001 0005 06
19
Light pneumatic rock drills
Applications: Features:
• Drills up to 2 m depth • Noise-reduction (S-versions)
• Plug hole drilling • HAPS™ Hand and Arm Protection System
(E-versions)
• Anchor and wedge hole drilling
• Built-in air flushing
• Trigger version available (ET)
Pneumatic rock drills BBD 12D BBD 12DS BBD 12DCS BBD 12T BBD 12TS BBD 15E BBD 15ET
Weight kg 9,8 10,7 10,5 11,1 12,1 15,5 15,5 15,6 15,6
Length mm 565 565 560 505 505 575 575 575 575
Air consumption l/s 24 22 22 24 22 22 22 22 22
Impact rate blows/min 2580 2580 2580 2580 2580 2520 2520 2520 2520
Revolutions rpm 220 220 220 220 220 220 220 220 220
Penetration rate mm/min 250 ¹) 230 ¹) 230 ¹) 150 ²) 150 ²) 220 ¹) 220 ¹) 220 ¹) 220 ¹)
Hose connection mm 13 13 13 19 19 19 19 16 16
Vibration level 3 axes (ISO 20643) m/s² 22,2 22,2 22,2 16 16 7 7 7 7
19x108/
Shank size mm 19x108 19x108 22x108 22x108 19x108 22x108 19x108 22x108
22x108
20
Medium and heavy pneumatic rock drills
Applications: Features:
• Drills up to 6 m depth • Noise-reduction (S-versions)
• Production drilling in quarry/dimension stone • HAPS™ Hand and Arm Protection System
industry (E-versions)
• Blast hole and secondary drilling • Built-in air flushing
• Extra flushing for quick and efficient hole
cleaning
These products are available only for sale in India and not for export. For global
markets, these tools have been replaced by next generation SRD rang of rock
drills. See page 19.
Pneumatic rock drills RH 571-5L RH 571-5LS RH 572E RH 658L RH 658 5L* RH 658 5L FR* RH 658LS
Weight kg 17,8 18,9 22,8 24 24 24,5 25
Impact rate blows/min 2100 1980 2040 2040 2040 2040 2040
Penetration rate 1) mm/min 295 275 260 425 425 425 425
Hose connection mm 19 19 19 19 19 19 19
Vibration level 3 axes (ISO 20643) m/s² 23,2 23,2 9,7 21,2 21,2 21,2 21,2
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 119 112 113 116 116 116 112
Sound pressure level (ISO 11203) Lp, r=1m 106 99 100 106 106 106 99
21
Pneumatic combi drills/hammers
Applications depending on weight class:
• Plug hole drilling 8-38 mm diameter
• Wedge hole drilling
• Chipping and scaling
• Renovation and rebuilding
• Underwater work Pneumatic combi drills/hammers DKR 36 DKR 36R
Hose connection mm 19 19
22
Pneumatic rock drills – Stopers
Applications:
• Raise driving
• Screening
Weight kg 40
Piston diameter mm 75
Stroke length mm 45
23
Underground pneumatic rock drills
Applications:
• Raise driving and bolting
• Screening
Features:
• High quality, designed for production drilling
• Built-in water flushing
Rock drills BBC 16W BBC 34W BBD 94W BBD 94WS RH 656 4W*
Hole range mm 27-41 27-41 27-41 27-41 27-41
Weight kg 28,5 33,5 28 31 22
Length mm 705 775 670 670 658
Air consumption l/s 69 88 97 97 48
Impact rate blows/min 2340 2280 3300 3300 2040
Piston diameter mm 70 80 90 90 65
Stroke length mm 55 70 45 45 59
Vibration level 3 axes (ISO 5349-2) m/s² 16,6 20,4 15 15 21,2
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 122 127 125 125 120
Sound pressure level (ISO 11203) Lp, r=1m 111 116 114 114 115
Part number 8311 0401 10 8311 0408 05 8311 0206 09 8311 0206 12 8311 0302 02
Data at 6 bar (90 psi) air pressure *Available only for India
24
Pneumatic rock drills − pusher legs
Applications:
• Underground horizontal drilling
Features:
• High quality, designed for production drilling
• Single or double telescopic pusher legs
Pusher legs BMT 51 ALF 71 ALF 71-1 ALF 72D ALF 72D-1 BMK 62S
Suitable for rock drill: BBC 16W, 34W BBC 16W, 34W BBC 16W, 34W BBD 94W BBD 94W RH 656W
Weight kg 15 14 13 19 16 17
Cylinder Bore mm 60 70 70 70 70 53
Part number 8321 0301 01 8321 0201 94 8321 0201 95 8321 0201 80 8321 0201 81 8321 0102 02
25
Rig-mounted pneumatic rock drills
Applications depending on weight class:
• Dimension stone industry (DSI)
• Marble and granite quarries
• Cable or chain feed drilling
Features:
• Efficient air flushing
• Can be converted to water flushing
• Production drilling
Weight kg 26
Length mm 670
Piston diameter mm 90
Stroke length mm 45
26
Pneumatic dust collector
Breaking is a dirty job but with a dust collector,
the operator is protected against the most
harmful dust. Atlas Copco’s pneumatic dust
collectors use vacuum technology to efficiently
remove dust directly at the source and keep
the silica dust level on your construction site
below the permissible exposure limit. They work
indoors as well as outdoors. They don’t require
power, only a reliable source of compressed air.
Features:
• Simple set-up and operation
• Recyclable collection bags
• Semi-automatic filter cleaning mechanism
• Will last an 8-hour shift
• Trolley version available
Available kits: DCP 10, part number 8311032515 (1), DCP 10 rock drill kit, part number 8311032520, DCP 10 Two Tool kit, part number 8311032518 (2)
For two tool operation : (1) and (2) to be ordered together. (1) is suitable only for single tool operation
27
Impact wrenches and needle scalers
Our impact wrenches and needle scalers simply
plug in to your compressor and let you handle
the toughest jobs. Impact wrenches are suitable
for material maintenance. Needle scalers are
perfect for cleaning concrete before reworking
it. Made of light but robust materials, with
excellent ergonomics and low vibration levels,
these compact tools make heavy construction
work easy.
Impact wrenches TEX 290W TEX 291W TEX 292W Needle scaler TEX 01N
28
Scabblers Features:
• Back head grip, gives in-line thrust
Working concrete has never been easier, • Chamfered cylinder block increases visibility to
thanks to Atlas Copco’s lighteight and compact the work surface
scabblers. They are equipped with tungsten
carbide tipped pistons. All models have three
pistons mounted in line of which the cycling
occurs due to the air porting arrangements in the
piston assembly.
Applications:
• Concrete cleaning and roughening
• Keying the surface of construction joints
• Produce ornamental or contrasting finishes on
concrete surfaces
Number of pistons 3 3 3
29
Tampers Features:
• Maximum power – slow powerful blows
Our pneumatic tampers are your go-to tool for efficiently and quickly compact all types of
compacting jobs, even for tough soil types like backfill, including clay and soils containing
clay. Lightweight and ergonomic, these powerful high percentages of finely crushed or
backfill tampers can be operated by a single powdered material
person. • Heat-treated cylinder and chrome plated
piston significantly extend tool life
• Aluminum butt held with clamp screw for
Applications: quick, easy replacement
• Compact soil around foundations and other • Exhaust deflector directs air, moisture and oil
structures away from the operator
• Compacting backfill in trenches • Integral oiler for continuous lubrication
Weight kg 13,6 19
30
Chipping hammer kits Breaker Kits
Kit Item kit Kit Item kit Component
Component in Kit Component Description Component Description
Number Description Number Description in Kit
3083 3220 00 Moil point hex 19 x 50 mm 3083 3206 00 Moil point hex 32 x 160 mm
3083 3222 00 Narrow chisel hex 19 x 50 mm 3083 3209 00 Narrow chisel hex 32 x 160 mm
8381 0200 56 TEX P60S KIT
3310 1206 00 Storage box 8099 0202 36 Breaker and hammer air-oil 1l
8461 0208 02 TEX 03PS KIT 3310 1624 00 Product label 8461 0227 23 TEX P60S, 32x160
8099 0202 40 Breaker and hammer air-oil 250ml 3083 3206 00 Moil point hex 32 x 160 mm
8461 0208 01 TEX 03 PS h19 x 50 3083 3209 00 Narrow chisel hex 32 x 160 mm
8381 0200 58 TEX P90S KIT
9030 2043 00 Rubber hose TEX 3/05 (PM) 8099 0202 36 Breaker and hammer air-oil 1l
3083 3220 00 Moil point hex 19 x 50 mm 8461 0228 23 TEX P90S, 32x160
3083 3222 00 Narrow chisel hex 19 x 50 mm
3310 1206 00 Storage box
8461 0219 02 TEX 05P KIT
8099 0202 40 Breaker and hammer air-oil 250ml
8461 0219 00 TEX 05 P h19 x 50
9030 2043 00 Rubber hose TEX 3/05 (PM)
3083 3220 00 Moil point hex 19 x 50 mm
8381 0200 33 TEX 05P KIT 3083 3222 00 Narrow chisel hex 19 x 50 mm
8461 0219 00 TEX 05 P h19 x 50
3083 3242 00 Moil point hex 22 x 82.5 mm
TEX 10PS KL
8381 0200 38 3083 3244 00 Narrow chisel hex 22 x 82.5 mm
KIT
8461 0211 32 TEX 10 PS KL h22 x 82.5
3083 3242 00 Moil point hex 22 x 82.5 mm
8381 0200 40 TEX 12PS KIT 3083 3244 00 Narrow chisel hex 22 x 82.5 mm
8461 0211 13 TEX 12 PS h22 x 82.5
3083 3242 00 Moil point hex 22 x 82.5 mm
TEX 12PS KL
8381 0200 41 3083 3244 00 Narrow chisel hex 22 x 82.5 mm
KIT
8461 0211 12 TEX 12 PS KL, 22x82.5
31
Nomenclature − Handheld Pneumatic Tools
SVR Silenced & Vibration Reduced Model Dry Only Air flushing
32
33
Handheld
hydraulic
tools
34
Handheld hydraulic tools
Hydraulic tools pack lots of power in a Pair your hydraulic breaker up with a
small machine: perfect if you find yourself compact power pack, available in fuel
working in cramped spaces or overhead. and electric versions and you are ready to
You’ll also find our hydraulic tools take on any job.
tackling emergency interventions in high
dense traffic areas and airports . • Flexible and compact system
• Excellent power-to-weight ratio
Clever design, with few moving parts • Suitable for indoor use, in any
that are continuously lubricated, means condition and even under water
minimal wear and little maintenance. • Continuous lubrication for minimal
Their closed-loop design keeps out dirt wear
and moisture, so no job is too rough for • Few parts and completely closed-loop
these tools.
35
Hydraulic standard hammer and breakers
Applications:
• Breaking light concrete and brickwork (LH 11)
Features:
• Low noise levels
• Slim design
• High power to weight ratio
• No exhaust or emission
• No additional lubrication needed
• No freezing
Part number LH 11
Hex 22x82,5 1801 1741 18
36
Vibro-reduced hydraulic breakers
Applications: Features:
• Medium and hard materials • Vibro-reduction
like asphalt and concrete • Vibro-damping chisel bushing
• Low noise levels
• Slim design
• High power to weight ratio
1)
LH 190 E with Hex 25, LH 230 E, LH 280 E and LH 400 E with Hex 32.
2)
Lengths for LH 190 E with Hex 25, LH 230 E, LH 280 E, LH 400 E with Hex 32
37
Hydraulic core drills
Applications: Features:
• Safe handheld drilling in reinforced concrete • High power to weight ratio
and asphalt up to 200 mm diameter in • Low vibrations
confined spaces, for ventilation, heating, gas • Low kick-back
piping and other installations
• Hydraulic torque control
• Works efficiently also in underwater
• Fits in standard drill stands
applications
• Closed hydraulic circuit
• Comes in carrying steel case as standard
1)
1/2” BSP male x 1 1⁄4 UNC male drive adaptor included for use of larger diameter core bits.
38
Hydraulic cut-off saws
Applications: Features:
• Cutting depth of 133-160 mm • Simple design with direct drive motor
• Works in dust, slurry and underwater • Open visible cutting face
• Used for cutting: • Good power-to-weight ratio
• Concrete, reinforced concrete • Compact and slim design
• Asphalt
• Steel
• Used with:
• Dry and wet diamond discs
• Abrasive steel cutting discs
Cut-off saws LS 14 LS 16
Also available: LSC cart for cut-off saw, part number 1809001001
39
Hydraulic post and ground rod drivers
Applications: Features:
• Drives up to 150 mm diameter poles • Available with built-in on/off valve or
• For driving of: hose mounted remote on/off valve
• Road barriers
• Tubes / profiles Options:
• Signposts • Adaptors driving heads
• Fences • Kits
• Anchors
• Ground rod
Activation type By trigger lever By trigger lever By remote valve By trigger lever By remote valve
Hydraulic system Open centre Open centre Open- or closed-centre Open centre Open- or closed-centre
Weight including hoses kg 17,5 32 33 39 40
Driving capacity 1) mm 10-60 40-100 40-100 70-150 70-150
Working pressure bar 80-100 105-140 105-140 105-125 105-125
Oil flow l/min 20 20-30 20-30 28-40 28-40
Impact rate blows/min 2300 (20l/min) 1680 (30l/min) 1680 (30l/min) 1320 (30l/min) 1320 (30l/min)
Hydraulic ports ½” BSP ½" BSP ½" BSP ½" BSP ½" BSP
Vibration level 3 axes (ISO 28927-10) 20 lpm 1) m/s² 17,5 12,8 - - -
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 116 115 115 118 118
Sound pressure level (ISO 11203) Lp, r=1m 102 102 102 105 105
EHTMA class C C/D C/D D/E D/E
Part number 1801 3940 06 1801 4040 02 1801 4050 02 1801 4140 00 1801 4150 00
1)
Depending on ground condition
40
Hydraulic post puller
Applications: Features:
• For removal of any pole, steel beam or tube • Integrated jaw
with diameters • Automatic chain tightening clamp
up to 200 mm • Total pulling force up to 10 tons
• For removing of:
• Wooden posts
• Steel posts
(incl IPE, HPE and UPE profile)
• Round/square steel tubes
• Fence posts
• Anchors
Weight kg 60
1)
Lever kit, part number 3371 8101 48
41
Hydraulic power packs
Features: • Lifting eye and cross lifting bar
• Portable, compact and lightweight • No exhaust or emission from the tools –
• High efficiency, low noise and low fuel power pack with engine can be placed away
consumption thanks to Power On Demand from tool
function (available with selected models only) • Large return filter and replacement indicator
• Low maintenance, long lifetime – moving • Thermostatically-controlled oil cooler
parts move in a closed lubricated circuit
• Protective steel frame with foldable handles
Power packs LP 9-20 P 1) LP 13-30 P 1) LP 18-30 PE2) LP 18-40 PE2) LP 18 Twin PE 2) LP 9-20 E
9 HP 13 HP 18 HP 18 HP 18 HP 5,5 kW/
Engine
Honda Honda B&S Vanguard B&S Vanguard B&S Vanguard 3x400 V/16A
Weight (incl oil) kg 80 91 119 119 123 73
Dimensions (LxWxH) mm 630x530x640 745x600x705 790x605x745 790x605x745 755x700x720 630x530x640
Oil flow l/min 20 20-30 20-30 20-40 2x20/1x40 20
Maximum pressure bar 150 150 172 145 145 150
Fuel capacity l 6 6,5 8,5 8,5 8,5 -
Hose included YES YES NO NO NO NO
Power on Demand (POD) YES YES NO NO YES NO
Oil control: engine oil YES YES YES YES YES NO
Electric start NO NO YES YES YES YES
1)
Extension twin-hose comes as standard with LP 9-20 P and LP 13-30 P.
2)
Available until stock lasts. New product coming soon.
42
Nomenclature − Handheld hydraulics tools
ABB. DESCRIPTION
H Hexagonal Bushings
S Silenced Version
R Round Bushings
D D handle
C Clockwise Rotation
T T Handle
L Latch Retainer
T External Trigger
LD Light Duty
HD Heavy Duty
43
44
Handheld
petrol drill and
breakers
45
Handheld petrol drill and breakers
A petrol-driven tool is a matter of grab
and go. This completely autonomous
system is perfect for remote locations and
hard-to-get places. Forget hoses, cables
or compressors: Atlas Copco’s Cobra tools
are immediately ready for action.
46
Motor breakers & drills (Cobra range)
Applications: Features: Cobra™ PROi and TTe
• Drilling and breaking (Cobra™ Combi) • Easy to transport • Adjustable handles
• Work on remote sites • Quick set-up time • Central oil lubrication
• Breaking concrete • HAPS™ Hand and Arm Protection System • High impact power
• Cutting asphalt • Low emissions
• Tamping and compacting • Low noise Cobra™ PROi, TTe and Combi
• Driving spikes, tubes, poles, • All models fully in compliance with latest
ground rods and probes American EPA, Phase 3 emission standard
• Digging ditches and holes and related EU emission standards
• Tie tamping (Cobra TTe)
Cobra petrol breakers PROe PROi TTe Combi/Pionjar 120
Type breaker breaker tie-tamper Breaker and drill
Weight kg 24-25 24-25 23-24 25
Length mm 877-927 877-927 877-927 732
Depth mm 358 358 358 281
Width across handles mm 623 623 623 585
Impact energy Joules 65 65 40 22-25
Blow frequency bpm 1440 1440 1620 2700
Penetration rate w 34 mm drill bit mm/min - - - 200-300
Max drilling depth m - - - 2
Drill rotation speed rpm - - - 250
Engine
Engine type 1 cylinder, 2-stroke
Cylinder displacement cc 90 90 90 185
Power kW 2 2 1.5 2
Cooling system Fan cooled
Starter system Recoil starter Magnapull
Fuel type Petrol, 90-100 octane unleaded
Fuel capacity l 1 1 1 1.2
Fuel mixture % 2 2 2 2
Fuel consumption l/hour 0.85 0.85 0.8 1,3-1,5
Oil-type (Atlas Copco) 2-stroke oil or similar
Alkylate Yes No
47
Vibration and sound PROe PROi TTe Combi/Pionjar 120
Vibration level 3 axes (ISO 28927-10) m/s² 3,3 3,3 3, 8 5,8 (breaking), 9,3 (drilling)
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 109 109 109 108
Full dimension details are available in the product’s Safety and Operating Instructions (Part number: 9800 0955 90). Available at www.acprintshop.com
ABB. DESCRIPTION
48
Cobra Kits
Kit Item kit Component Kit Item kit Component
Component Description Component Description
Number Description in Kit Number Description in Kit
3083 3217 00 Tie tamper hex 32 x 160 mm Tamping pad, square 200 mm for
3083 3197 00
Cobra TTe hex 28/32
8318 0700 98 8318 0701 11 Cobra TTe 32X160
kit 32x160
3083 3228 00 Moil point hex 22 x 108 mm
9234 0009 91 Transport box Cobra Pro/TT
3083 3234 00 Digging spade hex 22 x 108 mm
3083 3208 00 Narrow chisel hex 32 x 160 mm
3083 3212 00 Asphalt cutter hex 32 x 160 mm 3083 3235 00 Clay spade hex 22 x 108 mm
Cobra PROi Cobra Combi
8318 0702 52
kit 32x160 8318 0702 01 Cobra PROi 32x160 8318 0800 11 2010 with 3083 3236 00 Frost wedge hex 22 x 108 mm
tool kit
9234 0006 54 Trolley Cobra/pio 3083 3238 00 Shaft hex 22 x 108 mm
3083 3274 00 Narrow chisel hex 28 x 160 mm Tamping pad, square 175 mm for
3083 3239 00
hex 22/25
Cobra PROi 3083 3278 00 Asphalt cutter hex 28 x 160 mm
8318 0702 54 8318 0800 08 Cobra combi 2010
kit 28x160 8318 0702 05 Cobra PROi 28x160
9245 2813 51 Wedge set (for 34 mm holes)
9234 0006 54 Trolley cobra/pio
49
Notes
50 50
Notes
51
Notes
53
Power Technique Solutions Portfolio
2958 1750 02 © Atlas Copco Airpower NV, Belgium 2021. All rights reserved.
Atlas Copco’s Power Technique Business Area has a forward-thinking philosophy. For us, creating customer value is all about anticipating and exceeding your future
needs – while never compromising our environmental principles. Looking ahead and staying ahead is the only way we can ensure we are your long term partner.
Air compressors
Ready to go Versatility Productivity partner
• 1-5 m³/min • 5,5-22 m³/min • 19-116 m³/min
• 7-12 bar • 7-20 bar • 10-345 bar
Handheld tools
Pneumatic tools Hydraulic tools Petrol engine driven tools
• Breakers (2,5 – 40 kg) • Breakers (11 – 40 kg) • Breakers & Tie Tampers (25 kg)
• Rockdrills (5 – 25 kg) • Additional Hydraulic Tools • Combi Drills (23 Kg)
• Additional Air Tools • Powerpacks
• Underground Rock Drills
Photos and illustrations contained herein might depict products with optional and/or extra components which are not included with the standard version
of the product and, therefore, are not included in a purchase of such product unless the customer specifically purchases such optional/extra components.
We reserve the right to change the specifications and design of products described in this literature without notice. Not all products are available in all markets.