Professional Documents
Culture Documents
Overview - Description - Reason of Code
Overview - Description - Reason of Code
This test confirms the transmission is regulating proper ratio while in 4th range.
POSSIBLE REPAIRS:
DTC P0734 May Be Caused by:
1. Output shaft speed sensor signal circuit issues
2. Turbine shaft speed sensor signal circuit issues
3. Low clutch pressures, main pressure, or control main pressure
4. Control module issues like stuck/sticky valves, mechanically faulty solenoids, torn springs, damaged
valve bores, plugged suction filter, damaged gaskets, excessive leaks to exhaust, etc.
5. Internal transmission damage
6. Off-going and on-coming clutch issue
7. Issue with TCM