Professional Documents
Culture Documents
Opendesk Open-Archive Foosball-Table Hardware-Guide
Opendesk Open-Archive Foosball-Table Hardware-Guide
Playing surface X1
6mm thick toughened glass, frosted on one
face (sandblasted). dims : 1206mm x 714mm
Pitch X1
Printed on A0 roll
01 cross-beam (frame) X2
02 goal-section components X2
03 pitch base X1
Hardware guide It may be necessary to re-size components in order to make the table compatible with some
hardware. Foosball table bearings often differ in diameter and depth so it may be necessary to adjust
resizing the holes illustrated below. This is can be done very easily in CAD software such as Autocad and
Rhino3d.