Architectural Drawings: Services Drawings-Water System

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

MINISTRY OF EDUCATION, SCIENCE AND TECHNOLOGY

IN COLLABORATION WITH

PRESIDENT'S OFFICE REGIONAL ADMINISTRATION AND LOCAL GOVERNMENT

SECONDARY EDUCATION QUALITY IMPROVEMENT PROGRAMME (SEQUIP)

SERVICES DRAWINGS-
ARCHITECTURAL
MAY, 2021 WATER SYSTEM
DRAWINGS



ELEVATED WATER TANK STRUCTURAL DRAWINGS
NOTE:
1. All dimensions are in
mm unless otherwise
specified
2. All discrepancies shall
be referred to the
structural engineer
3. Reinforced concrete
shall be of grade 20
A A with fcu=20N/mm² at
28 days of age
S1(150) S1(150) 4. Main reinforcements
shall be high tensile
steel with fy =
460N/mm²

A
5. Nominal cover to the
reinforcements:
a) Foundation 50mm
BEAM GB1(230X300) b) Column 25mm
c) Beam 25mm
d) Slab 25mm

BEAM GB1(230X300)
A

S1(150) S1(150)

STRUCTURAL LAYOUT PLAN


SCALE 1:25
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
BUILDING
ELEVATED WATER TANK DRAWN BY R.A.M
CHECKED BY AIDAN N.

PHYSICAL FACILITIES SECTION DRAWING LAYOUT PLAN SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
mm unless otherwise
B specified
2. All discrepancies shall
be referred to the
structural engineer
3. Reinforced concrete
B B shall be of grade 20
with fcu=20N/mm² at
28 days of age
4. Main reinforcements
shall be high tensile
9Y16-01-200B1
steel with fy =
460N/mm²
5. Nominal cover to the
GROUND BEAM GB1(230X300) reinforcements:
a) Foundation 50mm

4Y16-02-200B2
GROUND BEAM GB1(230X300)
b) Column 25mm
c) Beam 25mm
d) Slab 25mm

9Y16-01-200B1
B 4Y16-02-200B2

FOUNDATION LAYOUT PLAN


SCALE 1:25
GROUND WATER TANK DRAWN BY R.A.M
BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING FOUNDATION PLAN SCALE 1:100 DATE: JULY, 2019
NOTE:
2Y16-01 1. All dimensions are in
mm unless otherwise
specified
2. All discrepancies shall
8Y-02-200 be referred to the
structural engineer
2Y16-01 3. Reinforced concrete
shall be of grade 20
with fcu=20N/mm² at
TYPICAL BEAM SECTION (230X400) 28 days of age
4. Main reinforcements
shall be high tensile
steel with fy =
460N/mm²
5. Nominal cover to the
reinforcements:
a) Foundation 50mm
b) Column 25mm
c) Beam 25mm
d) Slab 25mm

03
02 02 02

01 01
01

SECTION B:B
SCALE 1:25

50mm BLINDING

SECTION A:A
SCALE 1:25

GROUND WATER TANK DRAWN BY R.A.M


BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING REINFORCEMENT DETAILS SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
mm unless otherwise

B
specified
2. All discrepancies shall
be referred to the

2Y12-02-250T1

2Y12-02-250T1
8Y12-01-200B1 structural engineer
3. Reinforced concrete
shall be of grade 20
with fcu=20N/mm² at
2Y12-02-250T1 2Y12-02-250T1 28 days of age
4. Main reinforcements
shall be high tensile
steel with fy =
2Y12-02-250T1 2Y12-02-250T1
460N/mm²
5. Nominal cover to the

2Y12-02-250T1

2Y12-02-250T1
reinforcements:
8Y12-03-200T2 a) Foundation 50mm
b) Column 25mm
c) Beam 25mm

8Y12-03-200T2
8Y12-01-200B1

d) Slab 25mm

2Y12-02-250T1

2Y12-02-250T1
B B
2Y12-02-250T1 2Y12-02-250T1 2Y12-02-250T1 2Y12-02-250T1
2Y12-02-250T1

2Y12-02-250T1

STEEL REINFORCEMENT SLAB


SCALE 1:25 BUILDING
ELEVATED WATER TANK DRAWN BY R.A.M
CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING REINFORCEMENT DETAILS SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
mm unless otherwise
specified
2. All discrepancies shall
be referred to the
200 900 200
structural engineer
STRIP 01 Y16 2 9 18 1300 23400 3. Reinforced concrete
FOUNDATION 02 Y16 2 4 8 2300 18400 200 1900 200 shall be of grade 20
150 1950 150
with fcu=20N/mm² at
GROUND 01 Y16 2 4 8 2250 18000 28 days of age
BEAM (230X300)mm 180 4. Main reinforcements
02 Y16 2 10 20 1020 20400 250 250
80 shall be high tensile
80 180 steel with fy =
460N/mm²
150 1950 150
01 Y16 2 4 8 2250 18000 5. Nominal cover to the
RINGED
180 reinforcements:
BEAM (230X400)mm
02 Y8 2 10 20 1220 24400
350 350 a) Foundation 50mm
80
80 180 b) Column 25mm
c) Beam 25mm
300 300 d) Slab 25mm
SLAB 150mm THICK 110 110
1960
01 Y12 1 16 16 2780 44480

02 Y12 1 32 32 285 9120 285

03 Y12 1 16 16 830 13280 830

01 77800 736.93

02 66880 356.34

03 44800 106.10

1199.40

All bending dimensions to BS 4466

ELEVATED WATER TANK DRAWN BY R.A.M


BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING BENDING SCHEDULE SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
mm unless otherwise
specified
2. All discrepancies shall
WATER CHANNEL be referred to the
structural engineer
3. Reinforced concrete
shall be of grade 20
with fcu=20N/mm² at
WATER TAP PLATFORM 700X700 28 days of age
4. Main reinforcements
shall be high tensile
steel with fy =
460N/mm²
5. Nominal cover to the
reinforcements:
a) Foundation 50mm
B VENT
B b) Column 25mm
c) Beam 25mm
d) Slab 25mm

COVER 600X600 CONCRETE AND REINFORCEMENTS REFER STRUCTURAL DWG

GS DRAIN PIPE Ø 75mm

WATER TAP

REINFORCED CONCRETE

PLATFORM

WATER CHANNEL
G.L.

PLAIN CONCRETE

PLAN SECTION A:A


SCALE 1:25
SCALE 1:50

GROUND WATER TANK DRAWN BY R.A.M


BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING PLAN AND SECTION A-A SCALE 1:100 DATE: JULY, 2019
VENT REFER DETAIL DWG NOTE:
1. All dimensions are in
mm unless otherwise
specified
2. All discrepancies shall
REINFORCEMNT CONCRETE COVER SLAB be referred to the
REFER STRUCTURAL structural engineer
3. Reinforced concrete
shall be of grade 20
with fcu=20N/mm² at
28 days of age
4. Main reinforcements
shall be high tensile
steel with fy =
WATERPROOF PLASTER 460N/mm²
5. Nominal cover to the
reinforcements:
a) Foundation 50mm
CONCRETE AND REINFORCEMENTS REFER b) Column 25mm
STRUCTURAL DWG c) Beam 25mm
d) Slab 25mm

GS DRAIN PIPE Ø 75mm

STOPE VALVE

RAINFORCED CONCRETE SLAB

FOUNDATION DETAIL REFER DWG

SECTION B:B
SCALE 1:50
GROUND WATER TANK DRAWN BY R.A.M
BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING SECTION B-B SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
BITUMINOUS PAPER BETWEEN ROOF
AND WALL TO ALLOW FREE MOVEMENT mm unless otherwise
OF ROOF JOINT NOT TO BE COVERED specified
WITH PLASTER
2. All discrepancies shall
Y12-200-28
be referred to the
structural engineer
3. Reinforced concrete
6 Courses to have 1no
bar in each course shall be of grade 20
Ø10mm with fcu=20N/mm² at
A A 28 days of age
6 Courses to have 2 nos 4. Main reinforcements
bars in each course shall be high tensile
Ø10mm
steel with fy =
460N/mm²
6 Courses to have 3 nos
A 5. Nominal cover to the
bars in each course
Ø10mm
BRC or Y08-150 reinforcements:
a) Foundation 50mm
b) Column 25mm
c) Beam 25mm
d) Slab 25mm

X-SECTION THROUGH Ø TOP SLAB REINFORCEMENT PLAN


SCALE 1:50 SCALE 1:50

50 BRC or Y08-150

Y12-200-28 Y12-200-28
CONCRETE 1:3:6

3R10
3R10

DETAIL A 12MM SPACER 75MM LONG


SCALE 1:5
1000MM INTERVALS

DETAIL OF BLOCK WORK

SECTION A:A
SCALE 1:10

SCALE 1:50

GROUND WATER TANK DRAWN BY R.A.M


BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING REINFORCEMENT DETAILS SCALE 1:100 DATE: JULY, 2019
NOTE:
1. All dimensions are in
mm unless otherwise
specified
SLAB 1 Y12 2 1310 2620 STRAIGHT 2. All discrepancies shall
2 Y12 2 2220 4440 STRAIGHT be referred to the
3 Y12 2 2790 5580 STRAIGHT structural engineer
4 Y12 2 3220 6440 STRAIGHT 3. Reinforced concrete
5 Y12 2 3550 7100 STRAIGHT shall be of grade 20
6 Y12 2 3810 7620 STRAIGHT
with fcu=20N/mm² at
7 Y12 2 4015 8030 STRAIGHT
8
28 days of age
Y12 2 4170 8340 STRAIGHT
9 4. Main reinforcements
Y12 2 4285 8570 STRAIGHT
10 shall be high tensile
Y12 2 4360 8720 STRAIGHT
450
steel with fy =
11 Y12 2 4065 8130
110 3505 460N/mm²
12 Y12 1 4400 4400 STRAIGHT
5. Nominal cover to the
13 Y12 2 4380 8760 STRAIGHT
reinforcements:
14 Y12 2 4325 8650 STRAIGHT a) Foundation 50mm
15 Y12 2 4235 8470 STRAIGHT b) Column 25mm
16 Y12 2 4100 8200 STRAIGHT c) Beam 25mm
17 Y12 1 3920 7840 STRAIGHT d) Slab 25mm
18 Y12 2 3685 7370 STRAIGHT
19 Y12 2 3395 6790 STRAIGHT
20 Y12 2 1710 3420 450
110
905

21 Y12 2 1465 2930 450


110
905

22 Y12 1 1520 1520 STRAIGHT


23 Y12 2 700 1400 STRAIGHT
24 Y12 1 3020 3020 STRAIGHT
25 Y12 1 2530 2530 STRAIGHT
26 Y12 1 1835 1835 STRAIGHT
27 Y12 1 600 600 STRAIGHT
28 Y12 9 1200 10800 STRAIGHT

Y12 164125 874.458

All bending dimensions to BS 4466

GROUND WATER TANK DRAWN BY R.A.M


BUILDING CHECKED BY AIDAN N.
MINISTRY OF EDUCATION,SCIENCE AND TECHNOLOGY
PHYSICAL FACILITIES SECTION DRAWING BENDING SCHEDULE SCALE 1:100 DATE: JULY, 2019
SEQUIP SCHEDULE OF MATERIALS FOR TANK TOWER
ITEM DESCRIPTION QTY UNIT PRICE AMOUNT

Schedule of Materials

1 Foundation footing - Insitu plain concrete grade 15


Cement 50kg (42.5) 8 bags
Sand (lorry 4.5m³) 1 m3
Aggregate (3/4'') - (Lorry 4.5M3 ) 2 m3

2 Foundation Walls (4m )


2

6'' Block - Cement & Sand 56 No


Sand - (Lorry 4.5M3 ) 0.2 m3
Cement-50kgs (42.5) 1 Bags

3 Moram, Hardcore & Site sterilization


3
Moram (4.5m lorry) 1 Trips
3
Hardcore (4.5m lorry) 1 Trips
Sand - (Lorry 4.5M3 ) 1 m3

1 Block Walls
6'' Block - Cement & Sand 154 No
3
Sand - (Lorry 4.5M3 ) 0.5 m
Cement-50kgs 4 Bags

4 Suspended slab and Beam-Grade 20


Cement-50kgs (42.5) 6 bags
Sand (lorry 4.5m³) 0.44 m3
Aggregate (3/4'') - (Lorry 4.5M3 ) 1 m3
16mm diameter 2 pcs
8mm diameter 1 pcs
12mm diameter 5 pcs
Binding wire-1kg 3 pcs
1" x 8" (3.6m) 10 pcs
Supporting props 11 pcs

5 Finishings;
15mm thick plaster to block work
cement 50kg 4 bag
sand (lorry 4.5m³) 1 m3

Elevated Storage Tanks


6 10,000 Litres capacity Simtanks 1 No
TOTAL MATERIALS COST

JUNE 2021 Page/1


SEQUIP SCHEDULE OF MATERIALS FOR UNDERGROUND WATER TANK -32,000 LTRS
ITEM DESCRIPTION QTY UNIT PRICE AMOUNT

Underground Water Tank - 32,000 LTRS

1 Insitu plain concrete grade 15 to footing of foundation


Cement 50kg (42.5) 22 bags
Sand (lorry 4.5m³) 1 m3
Aggregate (3/4'') - (Lorry 4.5M3 ) 1 m3

2 Hardcore bed
250mm thick hardcore bed 2 trip

3 Reinforced insitu concrete grade 20 to suspended slab


Cement 50kg (42.5) 14 bags
Sand (lorry 4.5m³) 2 m3
Aggregate (3/4'') - (Lorry 4.5M3 ) 1 m3
8mm diameter 26 pcs
10mm diameter 44 pcs
12mm diameter 34 pcs
Binding wire 10 pcs
1" x 8" (3.6m) 30 pcs
Supporting props 15 pcs

4 Concrete block mix (1:2:4) as per issued Drawing


460 x 230 x 150mm thick 500 pcs
Cement 50kg (42.5) 13 bags
Sand (lorry 4.5m³) 1 trip

5 Finishings;
Bituminius paper 3m
15mm thick water proof rendering mix (1:3)
cement 50kg 15 bag
sand (lorry 4.5m³) 1 trip
Water proof material Master seal 501 or other equal and approved 2 Buckets

TOTAL MATERIALS COST

You might also like