Professional Documents
Culture Documents
7.1 Unique Fire
7.1 Unique Fire
7.1 Unique Fire
ABC Powder, the dry chemical powder agent in these extinguishers, is a non-conductor of electricity and is not
dangerous to humans or animals. This makes dry powder fire extinguishers the ideal equipment to use during danger-
ous mixed-class fires but their use should be avoided for fires which involve carbon disulphite and flammable metals
such as magnesium and sodium (Class D fires).
UNIQUE Portable Dry Powder Fire Extinguishers are available in five (5) convenient sizes: 1kg, 2kg, 4kg, 6kg and 9kg.
Class A
Ordinary combustible materials or
organic solids such as paper, wood,
cardboard and most plastics
Class B
Flammable or combustible liquids such as
petrol, kerosene, grease and oil
Class C
Flammable gases such as butane and
propane
Class E
Electrical equipment such as appliances, 9kg 6kg 4kg 2kg 1kg
wiring, circuit breakers and electrical
outlets
TECHNICAL DATA
Model UF-9 UF-6 UF-4 UF-2 UF-1
Capacity 9.0 kg 6.0 kg 4.0 kg 2.0 kg 1.0 kg
Type of Extinguishant ABC Powder
Type Stored Pressure
Propellant Nitrogen
Working Pressure 12 Bar (174psi)
Test Pressure 25 Bar (362.5psi)
Temperature Range -20°C to 60°C
Discharge Time (Approx) 20 sec 18 sec 14 sec 12 sec 7 sec
Overall Height 560 mm 562 mm 470 mm 378 mm 330 mm
Cylinder Diameter 181 mm 157 mm 157 mm 110 mm 79 mm
Approx Full Weight 13.0 kg 9.4 kg 6.9 kg 3.3 kg 1.9 kg
Body Material Cold Rolled
Finishing Red (RAL 3000)
Class of Fire A,B,C,E
Fire Rating 27A 144B 27A 144B 13A 70B 8A 55B 5A 21B
Manufactured & Approved MS 1539 PART 1 : 2002
UNIQUE Dry Powder Wheeled Fire Extinguisher is available in two sizes: 25kg and 50kg.
TECHNICAL DATA
Model UFM 25
Capacity 25 kg
Type of Extinguishant ABC Powder
Type Stored Pressure
Propellant Nitrogen
Working Pressure 15 bar (218 psi)
Test Pressure 30 bar (435 psi)
Temperature Range -20°C to 60°C
Discharge Time (Approx.) Min. 15 sec
Overall Length 440 mm
Overall Width 450 mm
Overall Height 960 mm
Body Material CR Steel
Finishing Red (RAL 3000)
Class of Fire A, B, C, E
Fire Rating A 233B C
25kg
TECHNICAL DATA
Model UFM 50
Capacity 50 kg
Type of Extinguishant ABC Powder
Type Stored Pressure
Propellant Nitrogen
Working Pressure 15 bar (218 psi)
Test Pressure 30 bar (435 psi)
Temperature Range -20°C to 60°C
Discharge Time (Approx.) Min. 30 sec
Overall Length 490 mm
Overall Width 500 mm
Overall Height 1110 mm
Body Material CR Steel
Finishing Red (RAL 3000)
Class of Fire A, B, C, E
50kg
Fire Rating A 233B C
Class B
Flammable or combustible liquids such as petrol, kerosene, grease and oil
Class C
Flammable gases such as butane and propane
Class E
Electrical equipment such as appliances, wiring, circuit breakers and electrical outlets
UNIQUE Portable Carbon Dioxide Fire Extinguisher is available in two sizes: 2kg and 5kg.
TECHNICAL DATA
Model GL 2.0 GL 5.0
Capacity 2.0 kg 5.0 kg
Type of Extinguishant Carbon Dioxide (CO )
Working Pressure 60 bar (870 psi)
Test Pressure 250 bar (3625 psi)
Temperature Range -20°C to 60°C
Discharge Time (Min.) 6 sec 9 sec
Overall Height 525 mm 755 mm
Overall Diameter 114 mm 137 mm
Approx. FullWeight 8.5 kg 14.5 kg
Body Material Carbon Steel Alloy Steel
Finishing Red (RAL 3000)
Class of Fire B, E
Fire Rating 21B 55B
5kg 2kg Manufactured & Approved MS 1539:PART 1:2002
The UNIQUE Carbon Dioxide Wheeled Fire Extinguisher is a 45kg-capacity extinguisher that is mounted on a four-wheel
trolley for easy transport and application when a fire occurs.
TECHNICAL DATA
Capacity 45 kg
Type of Extinguishant Carbon Dioxide (CO )
Working Pressure 60 bar (870 psi)
Test Pressure 250 bar (3625 psi)
Temperature Range -20°C to 60°C
Discharge Time (Approx.) 30 sec
Empty Weight 75 kg
Body Material Mn Steel
Finishing Red (RAL 3000)
Class of Fire B, E
CYLINDER ON TROLLEY
Overall Height 1530 mm
Overall Width 650 mm
45kg
Class E
Electrical equipment such as appliances, wiring, circuit breakers and electrical outlets
UNIQUE Portable Foam Fire Extinguisher is a 9-litre extinguisher and it is specially suited for fires involving materials such
as fats, petrol, oils and paints. Foam fire extinguishers should NEVER be used for electrical and deep fat fryer fires.
TECHNICAL DATA
Model UF9F
Capacity 9L
Type of Extinguishant AFFF Foam
Type Stored Pressure
Propellant Nitrogen
Working Pressure 14 bar (203 psi)
Test Pressure 27 bar (392 psi)
Temperature Range -5°C to 60°C
Discharge Time (Min.) 15 sec
Overall Length 220 mm
Overall Width 185 mm
Overall Height 585 mm
Approx. Full Weight 12.5 kg
Body Material CR steel
Finishing Red (RAL 3000)
9L
Class of Fire A, B
UNIQUE Foam Wheeled Fire Extinguisher is ideal for this purpose. The 45-litre extinguisher is mounted on a trolley and can
very quickly be moved from place to place for instant use.
TECHNICAL DATA
Model UFM45F
Capacity 45L
Type of Extinguishant AFFF Foam
Working Pressure 14 bar (203 psi)
Type Stored Pressure
Propellant Nitrogen
Working Pressure 15 bar (218 psi)
Test Pressure 30 bar (435 psi)
Temperature Range -5°C to 60°C
Discharge Time (Min.) 40 sec
Overall Length 490 mm
Overall Width 670 mm
Overall Height 1110 mm
Approx. Full Weight 85 kg
45L Body Material CR steel
Finishing Red (RAL 3000)
Class of Fire A, B
The above fire extinguishers can be used for:
Class A
Ordinary combustible materials or organic solids such as paper, wood, cardboard and most plastics
Class B
Flammable or combustible liquids such as petrol, kerosene, grease and oil
TECHNICAL DATA
Model 9kg Dry Powder 2kg CO
Dimensions (mm) 280(W) x 260(D) x 710(H) 280(W) x 260(D) x 710(H)
Thickness 0.9 mm
Installation Wall Mounted
Paint Finish Epoxy Powder Red
Material Mild Steel
TECHNICAL DATA
Model 9kg Dry Powder 2kg CO
Dimensions (mm) 280(W) x 260(D) x 710(H) 280(W) x 260(D) x 710(H)
Thickness 0.9 mm
Installation Wall Mounted
Paint Finish Epoxy Powder Red
Material Mild Steel
TECHNICAL DATA
Filling Speed Approx. 3kg/min
Suitable Calibre 20mm - 80mm
Power 0.7kW 220V/380V
Shuttle Weight 80kg
Size (mm) 550mm(W) x 850mm(D) x 1230mm(H)
f k
TECHNICAL DATA
Voltage 220V/50Hz
Power 1.1KW
Velocity 750 r/min
Pump 3 plungers style
Filling Volume Max Approx. 2 - 3 kg/min
Max. Output Pressure 140 bar
Electric Contact Pressure Gauge pre-set pressure as 120 bar
Weight 60 kg
Volume 500x420x400 (mm)
Oil Indicator
3 Plungers Pump SAFETY DATA OF CO2
Name Carbon Dioxide
Molecular Formula CO2
Danger it can make people suffocated when its
Motor density is high
ECP Gauge
Pressure Gauge
Filter a) Color : no color
b) Gas : no smell
c) State at 20°C : liquid
d) Hydraulic Pressure at 20°C : 57.3 bar
e) Critical Tempreature : 31°C
Gas Outlet
The sturdy steel side plate allows the reel drum to be easily swivelled to the left or right when needed.
TECHNICAL DATA
Drum Size 560mm (22”)
Type Swing Manual
Finishing Epoxy Powder Red
Hose Diameter 25mm
Hose Length 30m
Working Pressure 12 bar (174 psi)
Test Pressure 18 bar (261 psi)
Nozzle Type Jet/Spray/Shut-Off
Nozzle Size 25mm
560 (H)
Accessories
UNIQUE Fire Hose Drum
TECHNICAL DATA
Diameter 560mm (22”)
Type Swing Manual
Material C.R. Steel
Finishing Epoxy Powder Red
TECHNICAL DATA
Size 25mm (1”)
Length 30m
Working Pressure 12 bar (175 psi)
Test Pressure 18 bar (261 psi)
Material PVC
Finishing Black
Design Complies with EN 694
TECHNICAL DATA
Material NYLON ABS Brass Chrome Brass
Type Jet/Spray/Shut-Off
Finishing RED Chrome Plated Chrome Plated
Accessories
Fire Hose Reel Nozzle Box
TECHNICAL DATA
Size 130mm(W) x 55mm(D) x 130mm(H)
Thickness 0.9mm
Type Wall Mounted
Finishing Epoxy Powder Red
Material Mild Steel
TECHNICAL DATA
Size 750mm(W) x 380mm(D) x 150mm(H)
Thickness 0.9mm
Type Wall Mounted
Finishing Epoxy Powder Red
Material Mild Steel
TECHNICAL DATA
Size 25mm (1”)
Material Copper Alloy
Finishing Chrome Plated
TECHNICAL DATA
Size 25mm - 35mm
Material Mild Steel
Finishing Galvanised
TECHNICAL DATA
TYPE ORIFICE SIZE (mm)
OH1 31.0
OH2 40.0
OH3 45.0
OH3 Special 50.0
XHH 10min/min 62.0
XHH7.5mm/min 58.5
XLH 21.0/18.5
Vortex Inhibitor
A vortex inhibitor is attached to pump section pipes installed in water storage tanks to get rid of any vortexes within the
pump suction pipe. This prevents the pump from being damaged and ensures that the pump is working optimally at
all times during operation.
TECHNICAL DATA
Size (B.S 10 Table ‘E’ Flanges)
mm inches
50 2”
65 2.5”
80 3”
100 4”
150 6”
200 8”
250 10”
300 12”
400 16”
TECHNICAL DATA
PRESSURE (bar)
MODEL USE
Min Max
SPC 06B 0 6 Hose Reel Pump
SPC 10B 1 10 Sprinkler Pump
SPC 20B 5 20 Wet Riser & Hydrant Pump
SPC 30B 5 30 Hydrant Pump over 20 bar
TECHNICAL DATA
Operating Pressure 10 bar, 20 bar
Max Temperature 100°C
Power 15A 250V AC
Switch Acting SPDT
Paddle Stainless Steel
Cover ABS, SUS, M.S
Accessories
Sprinkler Guard
The sprinkler guard is designed to protect the sprinkler head from being accidentally struck.
TECHNICAL DATA
Material Mild Steel
Finishing Chrome Plated
TECHNICAL DATA
Material Mild Steel
Finishing Chrome Plated
TECHNICAL DATA
Material Mild Steel / Stainless Steel
Finishing Chrome Plated
Sprinkler Box
The sprinkler box is available in slots of 12, 24 and 36. It is used to house spare sprinkler heads.
TECHNICAL DATA
Size(mm) 355(W) x 110(D) x 180(H)
Material Mild Steel
Finishing Epoxy Powder Red
Manufacturer:
(Co. No. 418731-U)
FEATURES
• Easy installation between pipe flanges
• Instantaneous reading
• Simple water flow measurement
• No electrical power needed
• Isolation valves for tube replacement and cleaning
• Approved and listed by LPCB and equivalent
organisations worldwide
TECHNICAL DATA
Model DS 1163 DS 1162
Suited to line size 80mm - 150mm 50mm - 200mm
Orifice Plate Stainless Steel mounted on a 25mm-thick red Stainless Steel mounted on a 38mm thick red
polyester-coated steel carrier ring polyester-coated steel carrier ring
Accuracy ± 2.5% FSD ± 5% at various test flows specified by
LPCB
Measuring Tube Borosilicate Glass with 100mm fused-in ceramic scale
Float Stainless Steel
‘O’ Seals Nitrile
Indicator Housing Die-cast Aluminium with white polyester coating, Black bezel and Perspex window
Impulse Pipe Copper with plated brass connections Bright nickel-plated copper with
plated brass connections
Isolating Valves N/A Full bore (8mm) brass ball valves bright
nickel-plated
Drain/Bleed valves N/A Brass, bright nickel-plated with PTFE seat
Rodding device N/A Brass body, 316 Stainless Steel rod
Filter Unit N/A 316 Stainless Steel element with 1.55mm
perforations, TPX tube, plated Brass
connections and Nitrile ‘O’ Seals
Temperature Limitation N/A 80°C
Pressure Limitation N/A 12 bar @ 20°C
Pressure Test 250 psi 30 bar hydraulic
Pressure Drop At max flow rate 65% of the orifice pressure loss of 354”WG is recovered
A detailed catalogue of this product is available upon request.
LOSS PREVENTION
CERTIFICATON BOARD
Manufacturer:
(Co. No. 418731-U)
CD Automatic Sprinkler
A CD (Chang Der) Model A automatic sprinkler has an in-built 5mm diameter heat-sensitive glass bulb that shatters
when a pre-determined amount of heat from a fire reaches it. Once broken, the orifice seal is released and water is
discharged from the sprinkler in a spray pattern to douse the fire.
CD sprinkler models comply with UL 199 standard for automatic sprinklers for fire protection and is BOMBA approved.
These sprinkler models are chrome-finished and are activated at a temperature of 68°C (155°F):
• AHD 204G: ½” Model A pendent glass bulb sprinkler (SSP)
• AHD 204D: ½” Model A upright glass bulb sprinkler (SSU)
• AHD 204M: ½” Model A sidewall horizontal glass bulb sprinkler (SWP)
• CONVENTIONAL: ½ “ upright and pendent glass bulb sprinkler (C U/P)
CD Upright Sprinkler
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Brass Finished
CD Conventional Sprinkler
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
Manufacturer:
(Co. No. 418731-U)
Fluctuations and surges in water mains supply pressure is prevented by a separate bypass connection and by first
routing the water through a retard chamber.
The plate is soldered in three places to the sprinkler’s special upper support assembly. Sufficient heat from a fire will
cause the release of the plate. The exposed pendent spray sprinkler then discharges water in a hemispherical pattern
to extinguish the flames.
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
Manufacturer:
(Co. No. 418731-U)
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
TECHNICAL DATA
Size ½”
Activation Temperature 68°C
Finishing Chrome Finished
Manufacturer:
(Co. No. 418731-U)
TECHNICAL DATA
Size ½”
Activation Temperature 68°/79°/93°C
Finishing White
The valve will also trigger the Water Motor Alarm, a mechanical device which is actuated by a flow of water, during
sustained water flow, such as when a sprinkler is in operation.
Manufacturer:
(Co. No. 418731-U)
A mechanical retard feature in the WFD reduces the risk of false alarms due to pressure surges or air trapped in the
sprinkler system and its unique sealed design protects it against dust and other contaminants.
Manufacturer:
(Co. No. 418731-U)
TECHNICAL DATA
Model MV-A without strainer, MV-AS with strainer
Maximum Working Pressure 12 Bar (175 psi)
Effective Working Pressure 1.4 to 3.5 Bar (20-50 psi)
End Connection ½” BSPT (½” NPT optional)
Material Refer to ‘Construction Material’ table
Included Water Spray Angle For 140°, 120°, 110°, 100°, 90°, 80° and 65°
Each K-factor
Orifice Size and K-factor
(MM) (INCH) METRIC (US)
6.3 (0.248) - K18 (1.26)
6.0 (0.236) - K22 (1.54)
7.0 (0.275) - K30 (2.10)
7.5 (0.295) - K35 (2.45)
8.0 (0.314) - K41 (2.87)
9.0 (0.354) - K51 (3.57)
10.0 (0.393) - K64 (4.48)
11.0 (0.433) - K79 (5.53)
12.0 (0.472) - K91 (6.37)
12.5 (0.492) - K102 (7.14)
• Only K-Factors K18, K22, K30, K35 and K41 are available with strainer in Model MV-AS.
• K18 nozzle is with square edge orifice; others with tapered bore.
Weight 0.115 kg (approximately)
Finishing Natural Brass finish, Chrome plated Brass, Electroless Nickel plated, Epoxy powder coated
Approval UL listed
Ordering Information Specify K-Factor, spray angle, finish, model and end connection
CONSTRUCTION MATERIAL
COMPONENT MODEL MV-A MODEL MV-AS
HOUSING Forged Brass Forged Brass
IS:291, GR.-1 IS:291, GR.-1
(Equivalent to ASTM B21) (Equivalent to ASTM B21)
PIN Brass IS:291, GR.-1 Brass IS:291, GR.-1
(Equivalent to ASTM B21) (Equivalent to ASTM B21)
DEFLECTOR Brass IS:2768 Brass IS:2768
(Equivalent to ASTMB36) (Equivalent to ASTM B36)
STRAINER N/A Copper
A detailed catalogue of this product is available upon request.
Manufacturer:
(Co. No. 418731-U)
UNIQUE Photoelectric Smoke Detectors are made of rigid materials and designed to withstand heat.
FEATURES
• Easy to install and maintain
• Dual LEDs for 360° visibility
• Highly acid and rust resistant contact materials
• High endurance and fire-proof plastic covers
• Non-loosening screws on base terminal
• 2-wire or 3-wire standard detector. Add one relay output module for
4-wire unit.
• Passed strict EMC test which greatly eliminates false alarms caused by
interference from nearby sources
AH 0711
TECHNICAL DATA
Model AH 0711-2 AH 0711-3 AH 0711-4
Description 4-wire with
2-wire 3-wire
relay output
Alarm Contact N/A 0.8A@30V DC
Alarm Current
40mA 45mA
@24VDC 470Ω
Temperature Range -10°C to 55°C
Voltage Range 12V - 30V DC
47mm
Standby Current 25 - 75µA
Sensitivity Setting Complies with UL 268
Material Fire-proof plastic
Size Ø102mm x 47mm (H)
102mm Weight 130g 145g
Colour White
UNIQUE Photoelectric Smoke Detectors are made of rigid materials and designed to withstand heat.
FEATURES
• Easy to install and maintain
• Dual LEDs for 360° visibility
• Highly acid and rust resistant contact materials
• High endurance and fire-proof plastic covers
• Non-loosening screws on base terminal
• 2-wire or 3-wire standard detector. Add one relay output module for
4-wire unit.
• Passed strict EMC test which greatly eliminates false alarms caused by
interference from nearby sources
AH 0621
TECHNICAL DATA
Model AH 0621-2 AH 0621-3 AH 0621-4
Description 3-wire with remote 4-wire with
2-wire
indicator output relay output
Alarm Contact N/A 0.8A@30V DC
Alarm Current
40mA 45mA
@24VDC 470Ω
Temperature Range -10°C to 37.8°C
48mm Voltage Range 12V - 30V DC
Standby Current 25 - 75µA
Sensitivity Setting Complies with UL 268
Material Fire-proof plastic
Size Ø102mm x 48mm (H)
102mm Weight 130g 145g
Colour White
FEATURES
• Easy to install. No wiring required.
• Runs on a single 9V DC battery. Optional 100-240V AC power plug.
• Low battery warning. Unit beeps and intermittent LED flashes.
• Simple test method. Press button to test alarm.
• Optional relay out. COM.NO.NC.
• Optional series connection wiring. Co-activate up to 15 detectors.
QA 22
TECHNICAL DATA
Model QA22
Standby: Flash every 40 sec
Indicator Alarm: Flash and beep continuously
Battery Abnormal: Beeps and flash intermittently
Sound 90dB
Temperature Range -10°C to 55°C
Power 9V Battery
Sensitivity Setting Complies with EN 54
Material Fire Proof Plastic
Size Ø105mm x 48mm (H)
Weight 150g
Colour White
Type 1: 9V Battery
Type 2: Includes signal transfer COM.NO.N.C
Optional Function
Type 3: Built-in 100-240 V AC Pugs
Type 4: Type 2 + Type 3
Heat-sensitive elements in the unit detect the difference between the ambient temperature and the thermal heat
caused by convection or radiation from a heat source such as a fire. The increase per minute, regardless of the starting
temperature, is the rate-of-rise of temperature in the area.
For fire prevention, UNIQUE Heat Detector should be installed in places where a smoke detector is not appropriate,
such as in areas where smoke is a natural part of the surroundings or operations.
FEATURES
• Able to operate continuously for unlimited times
• Not affected by temperature as the conducting parts are made of
gold coating to avoid oxidation
• Low incidence of false alarms due to a special alloy in components
• Completely sealed unit protects against humidity, dust and insects
• Passed strict quality control tests
AH 0333
TECHNICAL DATA
Model AH 0333
Description 2-wire 3-wire 4-wire
0.8A@30V DC
Alarm Contact N/A
0.4A@125V AC
Alarm Current
40mA 40mA 35mA
@24VDC 470Ω
48 mm Temperature Range -0°C to 55°C
Voltage Range 12V - 30V DC
Material Fire-proof plastic
Size Ø111mm x 48mm (H)
Weight 137g 143g 147g
111mm
Colour White
Both Models 882 and 885 are UL listed and to be used only with compatible UL listed panels.
Model 822
Model 5601P is a single circuit heat detector that is actuated at a fixed temperature of 135°F (57°C) or a rate-of-rise of
15°F (8.3°C) per minute.
TECHNICAL DATA
Operating Humidity Range 5% to 95% RH non-condensing
Input Terminals 14 - 22 AWG
Dimensions with mounting bracket Ø116mm
Height 4.3mm
Model 5601 Weight 170 grams
Housing Plain
Manufacturer:
(Co. No. 418731-U)
TECHNICAL DATA
Highly efficient prismatic polycarbonate lens
Lens
optimised for omnidirectional viewing.
Luminary Filament Bulb/Ultra Bright LED
Size(mm) 210 (W) x 77 (D) x 108 (H)
Material
Bulb Mild Steel
(Casing & Hood)
Weight Epoxy Powder Red
Finishing Black casing with green and red lens
LED
TECHNICAL DATA
Power Supply Input 240V AC 50Hz
Operating System 24V DC
Charger Automatic/Trickle Type
300mA (Trickle)
Charging Rate
2.5A (Boost)
STANDBY MODE
Master 75mA
Per zone (with detectors) 5mA
Flashing Lights (Green LED) 75mA
ALARM MODE
Master 120mA
Per Trigger Zone 70mA
Output Devices 100mA
Flashing Lights (Red LED) 75mA
Per Bell 30mA
Size (W x D x H)mm
No. of Zones Model
Normal Weatherproof
2 PE-HP2000 430 x 195 x 370 435 x 195 x 410
4 PE-HP4000 525 x 178 x 380 540 x 178 x 420
6 PE-HP6000 510 x 210 x 586 532 x 226 x 611
8 PE-HP8000 510 x 210 x 586 532 x 226 x 611
TECHNICAL DATA
Size (mm) 105 (W) x 100 (D) x 105 (H)
Material (Casing) Mild Steel
Weight 760g
Colour Signal Red
FEATURES
• Easy to install
• Maintenance-free
• Highly efficient
• Operates even in adverse conditions
TECHNICAL DATA
Supply Voltage 110/ 240V (AC)
Supply Voltage 12/24V (DC)
Sound Output 92 - 105 dB
Current Consumption 0.05 A
Size Ø100 - 200mm (4”-8”)
Finishing Red
DECIBEL SPECIFICATION
AC Type Decibel Rating @ 1m (3ft)
Voltage Amps 100mm(4”) 150mm(6”) 200mm(8”)
110 0.0097 92dB 95dB 97dB
240 0.0033 98dB 105dB 106dB
DC Type Decibel Rating @ 1m (3ft)
12 0.008 95dB 99dB 100dB
24 0.005 96dB 103dB 105dB
TECHNICAL DATA
Size (mm) 105 (W) x 100 (D) x 105 (H)
Material (Casing) Mild Steel
Colour Red
Alternative terminals are provided for open or close circuits. There are openings at the back, bottom and the back of
the device that allows for ¾” conduits.
FEATURES
• Easy to install
• Reliable and safe
• Casing is resistant to heat and has high impact strength
• Metal parts are resistant to corrosion
• Highly reliable micro switch
OPTIONAL FEATURES
• Polycarbonate transparent protection cover
• Choice of casing colours: white, yellow, green, red and
yellow
• Instructions in specific languages can be printed on the
front cover upon request
TECHNICAL DATA
Size(mm) 88 (W) x 88 (D) x 55 (H)
12/24 V DC 10A
Current Ratings 48V DC 3A
250V AC 10A
Net/Gross Weight 150/176 g
Connection Terminal - Max 2.5mm² Cable
To test a heat detector, the tester device uses an in-built gas torch to briefly increase the temperature around the heat
detector until the LED lights in the detector switches on to indicate that the unit is working. Smoke detectors are tested
using the same tester to spray aerosol particles into the detector. The smoke detector is in working order when the LED
lights in the detector switch on.
FEATURES
• Simple to operate
• Sturdy 5-section extension pole is extendable from 1.44m
to 5m
• Optional Removal Tool attachment easily unscrews the
cover of detector
• Temperature of in-built gas torch is adjustable
• Capable of 500 test sprays (minimum)
After use, a fire hose should be hung up to dry to remove any standing water inside which, over time, can have a dete-
riorating effect on the hose. Hydrant hose cabinets, with louvers for ventilation, keep the hoses dry, organised and
neatly out of sight.
YAMA and COMMANDER are lightweight, single jacketed fire hoses with an inner rubber lining protected by tough,
woven polyester fabric on the outside. They are designed to resist extreme temperatures, cracking, acids, chemicals,
kinking and abrasion.
UNIQUE FIRE carries a range of YAMA and COMMANDER fire hoses that vary in size, length, colour, working pressure
and bursting pressure. Choose the fire hose that best suits your needs.
TECHNICAL DATA
Model FH-13W-40 FH-13W-65 FH-10W-65
Size (mm) 40 65 65
Working Pressure (bar) 13 10
Test Pressure (bar) 20 18
Burst Pressure (bar) 30 28
Length (m) 30
Finishing White
TECHNICAL DATA
Model FH-16W-65 FH-13R-65
Size (mm) 65 65
Working Pressure (bar) 16
Test Pressure (bar) 24
Burst Pressure (bar) 36
Length (m) 30
Finishing White Red
FEATURES
• Resistant to multiple agents: abrasion, acids, chemicals,
extreme temperatures, cracking, delamination, heat,
kinking, oils, ozone, adverse weather conditions etc.
• Operating temperature: -30°C to 50°C
• No maintenance required.
• No drying required after use.
• Easy to coil, dry or wet.
TECHNICAL DATA
Inner Diameter Weight Thickness Working Pressure Test Pressure Break Pressure
mm inches g/m lbs/ft mm bar psi bar psi bar psi
38 1 ½” 340 0.230 2.25 20 290 30 435 60 870
52 2” 450 0.300 2.40 20 290 30 435 55 800
63.5 2 ½” 600 0.400 2.40 20 290 30 435 50 725
TECHNICAL DATA
Material Light Alloy/Brass/Bronze
155 mm Inlet Ø65mm (male)
Connection Instantaneous
42mm
63.5mm
TECHNICAL DATA
Material Light Alloy/Brass/Bronze
Inlet Ø65mm (male)
290mm
Connection Instantaneous
42mm
63.5mm
Instantaneous Coupling
Male
Coupling 203mm
TECHNICAL DATA
Material Light Alloy
Inlet Ø40mm
Ø65mm
Release
Female Connection Instantaneous
Coupling
Hose Cradle
TECHNICAL DATA
Material Aluminum
Body Mild Steel
Finishing Red Polyester Electrostatic Powder Coating
160mm 180mm
115mm 145mm
183mm
620mm
TECHNICAL DATA
Pressure Test 20 bar
Flange Inlet 100mm Table E
Outlet BS 366 Female Instantaneous
Material Cast Iron (Body)
Copper Alloy (Valve)
Finishing Yellow
Thread:
min 7.0mm
DIN477
W28.8
TECHNICAL DATA
Nett Volume 68 L
1480mm±10
CO Capacity 45 kg
Working Pressure 150 bar
Empty Weight 75kg
Material Mn Steel
DOT-3AA
Manufactured
min 12.6mm
BS 5045 Part 1
Ø267.4mm
Connecting Hose
TECHNICAL DATA
Size(mm) 6mm (¼” ) 12mm (½” )
6mm
Length 330mm (13”) 432mm (17”)
Type High Pressure Hose High Pressure Hose
Material Steel Braided Steel Braided
Rubber Hose Rubber Hose
12mm Working Pressure 150 bar 150 bar
TECHNICAL DATA
Size (mm) Ø200 (W) x 65 (H)
Material Aluminum Alloy
Finishing Red Polyester
200 mm
200mm
FIRE
BREAK GLASS PULL HANDLE
TO:
ACTIVE CO2 SYSTEM
65mm
FRONT VIEW SIDE VIEW
Cylinder Valve
TECHNICAL DATA
Material Forged brass CuZn 3963
Type Mode UP-05
Working Pressure 150 bar
Type Manual/Pneumatic/Electric
Pneumatic Actuation 15 bar
Weight of Valve 700g
Standard DIN477
TECHNICAL DATA
Size (mm) 180(W) x 90(D) x 204(H)
Material Aluminium Alloy
Finishing Red Polyester
TECHNICAL DATA
Gas Nitrogen
Store Pressure 38 bar (550psi)
Power 24 V DC
TECHNICAL DATA
Material Steel
Finishing Galvanised
Airvent 10mm
TECHNICAL DATA
Size (mm) 10 (⅜”)
Material Steel
Finishing Galvanised
Tee
TECHNICAL DATA
Size (mm) 13mm(½”) x 13mm(½”) x 6mm(¼”)
Material Steel
Finishing Galvanised
Plug
TECHNICAL DATA
Size (mm) 10mm(⅜”)
Material Steel
Finishing Galvanised
Advantages
• Safe for people and places
• Clean
• Easy to install
• Cost effective
• Available in a range of capacities (18 - 500 pounds)
FEATURES
• The FM-200 components consist of agent containers,
container supports (racks), and discharge nozzles.
• The control panel is the brain of the system and is used to
monitor the detection and accessories.
• The detection, alarm devices and accessories are the
external devices that act as the eyes and voice of the
system as they give audible or visual signals.
• The completer kits consist of warning signs, hoses,
connection fittings, pressure gauges or solenoid valves,
and the actuator required to operate the cylinder valve.
Manufacturer:
(Co. No. 418731-U)
Best value
• Unmatched coverage of range area
• Cost effective
• Easy to install, modify or expand
• Minimum piping required
• Valves have pressure gauges for system readiness
• Integral, pure tin bursting disk to prevent nozzle
contamination
Versatile
• Variety of chrome-plated nozzles with integral strainers
and foil seals
• Nozzle can even be placed outside appliance perimeter.
• 5 cylinder sizes available
• Flexible piping configurations
• 3 choices of piping: black steel, stainless steel tubing,
brass piping
• Swivel adaptors for nozzles are available
Quality assured
• ISO 9002 certified
• Meets UL 300 standards for protection of restaurant
cooking areas
• Meets the standards of NFPA 17A and 96, ULC, BOCA and
MEA
Manufacturer:
(Co. No. 418731-U)
TECHNICAL DATA
Material Woven Fibreglass Fabric
Colour White
Coating Finish Loomstate
Operating Temperature Basic Fabric 600°C
Size (mm) 1200 x 1200 (4’ x 4’)
1200 x 1800 (4’ x 6’)
1800 x 1800 (6’ x 6’)
TECHNICAL DATA
Material Woven Fibreglass Fabric
Colour White
Coating Finish Loomstate
Operating Temperature Basic Fabric 600°C
Standard BS 476: Part 7