Professional Documents
Culture Documents
LRL305 ENG - Land Rover Freelander 1999 - Owners Guide - Softback & Hardbac
LRL305 ENG - Land Rover Freelander 1999 - Owners Guide - Softback & Hardbac
Contents
As part of Land Rover’s environmental policy, this publication is printed on paper made from
chlorine free pulp.
1
Cleaning the Softback
WARNING! IMPORTANT
DO NOT use abrasive or solvent
cleaners on the canopy and especially The removable window panels fitted to the
NOT on the removable window panels. softback, are susceptible to scratching from
the effects of dirt and grit. For this reason, it
Use only mild detergents. is important to wash them frequently.
Never use spirit, petrol or chlorine based DO NOT wipe the window panels when they
cleaning agents, or wash/wax compounds to are dry.
clean the canopy and windows.
Wash the windows with a clean, grit-free
Never use an automatic car wash, or a high sponge or cloth and a mixture of a mild
pressure hose. dishwashing detergent and cold or lukewarm
water. Rinse the window panels thoroughly
Do not aim jets of water at zips or seals. and wipe with a soft moist cloth.
Ensure the softback is dry before folding or Remove frost, ice and snow using lukewarm
removing. water - do not use a scraper. Take care when
clearing ice or snow from the window
Improper cleaning and lack of care may panels, as they are easily scratched and
cause damage to the canopy and window could crack at low temperatures.
panels, resulting in water penetration.
Do not put adhesive backed material
(badges, stickers etc) onto the canopy
window panels - this may result in damage
and discolouration.
2
Folding & Unfolding the
SOFTBACK
WARNING!
Avoid folding the softback when wet.
3
Folding the Softback
F57
1 4
F55 F58
F59
4
Folding the Softback
6 8
F60 F62
Push and twist to release elbow Pull corner post beading out of
stay locking collar. retaining channel.
F61
F63
5
Folding the Softback
10 12
F66
13
F64
14
F65
6
Folding the Softback
15
F69
16
F70
17
F71
Close taildoor.
7
Unfolding the Softback
F18
1 4
F19
F16
Detach corner post clips.
Unfasten the side cover velcro
Push and twist to release elbow
and stud fasteners.
stay locking collar.
2 5
F20
8
Unfolding the Softback
6 8
F23
F21
9
Attach corner post catch and
push away from the centre of
the vehicle to lock.
F24
10
7
F25
F22
9
Unfolding the Softback
11 13
F26 F29A
Secure tonneau cover with the Slide the side screen up the
three press studs. retaining channel, using a
series of short pushes,
12 positioning the hands where
shown.
14
F27
15
F31
F28
Close taildoor.
10
Removing & Fitting the
SOFTBACK
WARNING!
Before removing or fitting the softback, it
is recommended that the aerial is either
tilted towards the vertical, or removed
(see ’Owner’s Handbook’) to avoid
accidental injury.
11
Removing the Softback
1
3
F46
F48
Unfasten side cover velcro and
Remove clip pin from elbow
stud fasteners.
stay.
2
4
F49
12
Removing the Softback
F51
13
Fitting the Softback
F35
F32 Position softback on vehicle.
1 4
F33 F36
F34
F37
14
Fitting the Softback
5 7
F38 F40
F41
F39
F42
15
Fitting the Softback
10
F43
11
F44
Close taildoor.
16
Removing & Fitting the
HARDBACK
WARNING!
The roof bars MUST be removed, prior to
removing or fitting the hardback to the
vehicle.
17
Removing the Hardback
1 2
F6
F7
F5
F1
1
2
F2
F3
19
Fitting the Hardback
F4
WARNING!
Do not drive the vehicle if the header
catches are not secure.
20
Removing & Fitting the
ROOF BARS
WARNING!
DO NOT remove or adjust any bolt, other
than those highlighted in the illustrations
on the following pages.
21
Removing the Roof Bars
F10
F8
F9
22
Fitting the Roof Bars
F13
F14
F15
23
24