Professional Documents
Culture Documents
NLG02-13 en
NLG02-13 en
NLG02-13 en
Light curtains
Types NLG02D, NLG13D
• Safety Category 4, Performance Level e,
according to EN 13849-1
• Safety Category 4 according to EN 954-1
• 2 x 6 A NO safety outputs (NLG02D)
• 3 x 6 A NO safety outputs and 1 x 6 A NC auxiliary
output (NLG13D)
• Automatic / manual or monitored manual reset
• Single / double channel operations
• LED indication for outputs status and power supply ON
• Connection by fixed or detachable terminals
• For mounting on DIN-rail in accordance with
DIN/EN 50 022
• 22.5 mm Euronorm housing
Screw, fixed Screw, detachable
Type Selection
Auxiliary Safety Terminals Start/Reset type Supply: 24 VDC
outputs outputs
2 NO Screw, fixed Automatic / Manual N LG 0 2 D 724 S A
2 NO Screw, fixed Monitored manual N LG 0 2 D 724 S C
2 NO Screw, detachable Automatic / Manual N LG 0 2 D 724 D A
2 NO Screw, detachable Monitored manual N LG 0 2 D 724 D C
1 NC 3 NO Screw, fixed Automatic / Manual N LG 1 3 D 724 S A
1 NC 3 NO Screw, fixed Monitored manual N LG 1 3 D 724 S C
1 NC 3 NO Screw, detachable Automatic / Manual N LG 1 3 D 724 D A
1 NC 3 NO Screw, detachable Monitored manual N LG 1 3 D 724 D C
Mode of Operation
The safety modules NLG02D Automatic START Manual START Monitored manual START
and NLG13D monitor Elec- Provided that the terminals Provided that both the mod- The monitored manual
troSensitive Equipments X1 and X2 (NLG02...A) or ule inputs are activated, the START versions (NLG...C)
(ESPE) with PNP or relay S33 and S34 (NLG13...A) are safety outputs close and the work as described in the
outputs according to connected, the safety out- auxiliary output opens previous paragraph (Manual
98/37/EC Machinery Direc- puts close and the auxiliary (NLG13...A) as soon as the START) except for a mini-
tive. output opens (NLG13...A) as NO START pushbutton is mum delay of 500 ms from
If the safety system soon as both the module pushed connecting X1 and the activated status of the
(NLG+ESPE) is correctly inputs are activated. X2 (NLG02...A) or S33 and module inputs to the push-
supplied, the input terminals The relevant CH1 and CH2 S34 (NLG13...A). ing of the START button.
of the module are activated LED turn on. A new operating cycle is If the inputs of the module
(light beams not interrupted) Deactivating even one mod- possible only after deacti- are closed with the START
and there aren’t fault condi- ule input forces immediately vating both the module switch already closed, the
tions, the module is enabled the safety outputs to open inputs, activating them again safety outputs don’t close
to close the safety outputs and the auxiliary output and pushing the START but- and the auxiliary doesn’t
and the external contactors (NLG13...A) to close. ton. open (NLG13...C): it is nec-
can be energized. A new operating cycle is essary to release the START
When the input terminals are possible only after deacti- button and deactivate the
not activated (light beams vating both input contacts module inputs before start-
interrupted) the module is and then operating them ing a new cycle, then oper-
not enabled to close the again. ate the inputs of the module
safety outputs and the and finally, after at least 500
external contactors can not ms, operate the START but-
be energized. ton.
So if the NO START button
gets welded, the outputs
don’t close anymore.
Operation Diagrams
NLG02D...SA, NLG02D...DA
NLG13D...SA, NLG13D...DA
NLG02D...SC, NLG02D...DC
NLG13D...SC, NLG13D...DC
Wiring Diagrams
NLG02D - Two 1-wire PNP outputs - Safety cat. 4 NLG13D - Two 1-wire PNP outputs - Safety cat. 4
* Note * Note
NLG02D - Two 1-wire relay outputs - Safety cat. 4 NLG13D - Two 1-wire relay outputs - Safety cat. 4
* Note * Note
* Note: The same power supply has to be used both for the module and for the light curtain.
* Note * Note
NLG02D - One 1-wire relay output - Safety cat. 2 NLG13D - One 1-wire relay output - Safety cat. 2
* Note * Note
NLG02D - Two 2-wire PNP outputs - Safety cat. 4 NLG13D - Two 2-wire PNP outputs - Safety cat. 4
NLG02D - Two 2-wire relay outputs - Safety cat. 4 NLG13D - Two 2-wire relay outputs - Safety cat. 4
* Note: The same power supply has to be used both for the module and for the light curtain.
NLG02D - One 2-wire relay output - Safety cat. 2 NLG13D - One 2-wire relay output - Safety cat. 2
Dimensions
Versions with fixed terminals Versions with detachable terminals